Refine
Year of publication
Language
- English (15) (remove)
Keywords
- Arzneimittel (3)
- Biodegradation (2)
- Pharmaceuticals (2)
- Photolysis (2)
- Abbau (1)
- Antibiotikum (1)
- Anticancer Drug (1)
- Aquatic environment (1)
- Biodegradability (1)
- Biofilm (1)
- Biologische Abbaubarkeit (1)
- Biomass burning (1)
- Coastel environment (1)
- Data Mining (1)
- Degradation (1)
- Fatty Acids (1)
- Gewässer (1)
- Holocene (1)
- Hydrological tracers (1)
- Kläranlage (1)
- Küstengebiet (1)
- Lipids (1)
- Pesticide formulation (1)
- Pestizid (1)
- Photodegradation (1)
- Sediment (1)
- Toxicity (1)
- UV photolysis (1)
- Umweltbelastung (1)
- Wasserbehandlung (1)
- Wastewater treatment plant (1)
- Water treatment (1)
- Zahnschmelz (1)
- genotoxicity (1)
- transformation products (1)
- whole mixture toxicity (1)
In the discourse on pharmaceuticals in the environment, hardly any attention has been paid to anticancer drugs. Because of their none-selective modes of action, that is, because they affect both cancerous and healthy cells, these drugs are regarded as potentially carcinogenic, genotoxic, mutagenic, and teratogenic substances. It is, however, not known how and to what extent these substances affect organisms and the environment in the long run. For this reason, this dissertation evaluated, addressing several endpoints and using organisms from different trophic levels and in silico predictions, the fate (bio- and photo degradation) and ecotoxicity of these substances. Four anticancer drugs (cyclophosphamide (CP), 5-fluorouracil (5-FU), methotrexate (MTX), and imatinib (IM) were selected. None of these anticancer compounds can be classified as ´readily biodegradable,´ a classification that indicates that biodegradation will only play a minor role in the elimination of these compounds and that they cannot be removed by the conventional processes used in sewage treatment plants and will most likely remain in the water cycle. Despite the high degrees of mineralization achieved in advanced (photo)oxidation processes, it was not possible to fully mineralize the compounds, a result that indicates that transformation products were created during these reactions. The ecotoxicity assays performed with V. fischeri indicated that 5-FU was, of all the substances tested, likely to be the most toxic (very toxic), followed by MTX (toxic) and IM (toxic/harmful), whereas CP was nontoxic. MTX presented the highest phytoxicity activity in the Lactuca sativa assay, followed by 5-FU, IM, and CP. The results of the tests performed with A. cepa showed cytotoxic (5-FU, MTX, and CP) and genotoxic effects (5-FU, CP, and IM) and mutagenic activity (5-FU, MTX, CP, and IM) of the compounds. Photo transformation products (PTPs) of CP, MTX, and 5-FU were nontoxic towards V. fischeri. However, some PTPs formed during the photodegradation of 5-FU led to positive mutagenic and genotoxic alerts in several in silico models. Not one of the compounds examined in this dissertation is likely to be fully eliminated from the water cycle by (natural) photolysis and/or advanced oxidation. Moreover, some of the treatments resulted in the formation of stable intermediates that were even less biodegradable than parent compounds. This finding shows that it is not enough to focus on primary elimination because TPs are not necessarily better biodegradable than their respective parent compounds. As indicated by the genotoxic and mutagenic positive alerts presented by different in silico models, the PTPs observed here are likely to require, despite their lower toxicity in comparison to the parent compounds, screening after treatments.
Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been widely used since 1950 in various consumer products as well as in industrial applications owing to their unique properties, e.g. being hydrophobic and lipophobic at the same time. Nowadays, some of these persistent and man-made PFASs can ubiquitously be found in humans, wildlife and various environmental media. One prominent representative of concern, belonging to the subgroup of perfluorocarboxylates (PFCs) and their conjugate acids (PFCAs), is perfluorooctanoat (PFO) and its conjugate acid (PFOA). Because of its adverse effects on human health and its persistency in the environment industry has started to replace PFO(A) and related long chain chemicals (with seven and more fully fluorinated carbon atoms) with so-called short chain PFASs (less than seven fully fluorinated carbon atoms), including precursors of PFC(A)s. Also these short chain PFC(A)s are persistent and can already be found in humans, ground- and drinking water and in remote regions. However, knowledge gaps exist in understanding the partitioning and the resulting mobility of short chain PFC(A)s in the environment. This is due to the fact that partitioning data of PFC(A)s from standardised experiments can easily be biased by various artefacts, e.g. self-aggregation of the molecules. Therefore, the objectives of this thesis are (i) to quantify the partitioning of PFC(A)s into mobile environmental media, (ii) to show how results from non-standard tests can be used to assess substance properties of concern and (iii) to conclude on whether the environmental exposure to short chain PFC(A)s is of concern from a regulatory point of view. In the first part of this thesis, the environmental mobility of short chain C4-7-PFC(A)s was investigated by quantifying their partitioning under non-standardised semi-environmental conditions into mobile environmental media, focusing on water and air, and comparing it to long chain PFC(A)s. Results are: Partitioning between water and particles in the aeration tank, primary and secondary clarifier of a wastewater treatment plant (WWTP) showed no distinct differences for short chain PFC(A)s compared to their long chain homologues (Paper 1). In a water-saturated sandy sediment column short chain PFC(A)s were not retarded, whereas long chain homologues were retarded by sorption to the sediment (Paper 2). Atmospheric particle-gas partitioning showed a lower fraction sorbed to particles for short chain PFC(A)s compared to long chain ones in samples from a WWTP (Paper 3). Air-water concentration ratios based on samples from the tanks of a WWTP were found to be higher for short chain PFC(A)s compared to long chain PFC(A)s (Paper 1). Additionally, in a newly developed experimental set-up the water to air transfer was used to derive that the pKa of C4-11-PFCAs must be <1.6 instead of up to 3.8 as reported in the literature (Paper 4). Overall, in the investigated systems short chain PFC(A)s showed a higher mobility due to a more pronounced partitioning into mobile environmental media compared to long chain PFC(A)s. In the second part of the thesis it was shown how PFO(A) - owing to its persistent, bioaccumulative and toxic (PBT-)properties – was in the context of this thesis successfully assessed as a substance of very high concern according to the criteria of the European REACH Regulation (EC No 1907/2006) by using data from non-standard tests (Paper 5). In conclusion, based on the knowledge of the high environmental mobility of short chain PFC(A)s and taking into account the argumentation of the PBT-concern of PFO(A), environmental exposure to short chain PFC(A)s is of concern and existing knowledge is already sufficient to initiate measures to prevent emissions of short chain PFC(A)s and their precursors into the environment.
Uranine (sodium fluorescein, UR) has been routinely used in hydrological research to monitor surface and subsurface water flow, transport and mixing processes since the end of nineteenth century. Based on such obtained data, further conclusions can be drawn on the spread and behavior of pollutants (partly on models). Use of UR for qualitative (visual) studies of underground contamination is common, however data available on its environmental behavior (e.g., conversion, degradation or formation and fate of the transformation products, TPs) are incomplete or not readily comparable. UR observations of biodegradation are still speculative. S-metolachlor (SM) is a popular worldwide chloroacetamide herbicide, which highly correspond to the global pesticide use. It is offered on the French market as an effective multicrop herbicide against annual grasses and certain broadleaf weeds under the trade name Mercantor Gold (MG). Photodegradation contributes to the fate of SM in the aquatic environment. TPs were already found in surface and groundwater. However, further fate and assessment of the TPs was not done. Moreover, adjuvants in MG´s formula can affect the solubility, biodegradation, photolysis and sorption properties of the active compound SM. TPs can have different properties (e.g. more mobile, toxic or present at higher concentrations) that enable them to reach the environmental compartments not affected by the parent compound (PC) itself. To assess the ecological impact of pesticides, tracers, and their respective TPs on water organisms, their behavior can be investigated in laboratory screening biodegradation tests. Yet, incomplete data was available on SM, MG and UR transformation or their photo- TPs´ fate in surface and water-sediment systems. The combination of photolysis with aerobic biodegradation in order to identify persistent photo-TPs could provide new insight into the environmental behavior of the selected compounds. Therefore, principle of this thesis was to 1) identify the impact of MG´s adjuvants on the biodegradation, photolysis (Xe lamp) and sorption compared to the SM alone, 2) examine the photolysis and biodegradability of UR 3) monitor the primary elimination (photolysis) of the PCs by HPLC (-UV, -FLD) and measure the degree of mineralization by means of nonpurgeable organic carbon (NPOC) 4) elucidate the photo-TPs of SM, MG and UR by using LCMS/ MS 5) analyze biodegradability of the photo-TPs in order to determine their fate and persistence in aquatic environment 6) conduct in silico toxicity predictions (pesticides) in human (carcinogenicity, genotoxicity and mutagenicity) and eco-toxicity (microtoxicity, bioconcentration factor and toxicity in rainbow trouts). SM, MG and UR were found not readily biodegradable in Closed Bottle test (CBT), Manometric Respiratory test (MRT) and in water-sediment test (WST). Chemical analysis of photolysis samples showed higher elimination of SM in MG compared to SM alone whereas UR displayed high primary elimination rate in general. The overall low degree of mineralization indicated that abundant photo-TPs were formed. Furthermore, the photo-TPs were found not biodegradable in performed biodegradation tests. Only small degradation rates for UR could be observed in the CBT and WST. Additionally, in the MRT and WST new bio-TPs were generated from the photo-TPs of SM and SM in MG. Obtained results suggest that the MG formulation did not significantly affect the biodegradation, however it influenced the diffusion of the active substance (SM) to sediment and potentially affected the photolysis efficiency, which might result in faster formation of photo-TPs in the environment. In silico predictions showed that for many endpoints, biotransformation might lead to an increased toxicity in humans and to water organisms compared with the parent compound SM. No indications were found for UR toxicity. Still, target-oriented investigations on long term impacts of photo-TPs from UR are warranted. The present work demonstrates that a combination of laboratory tests, analytical analysis and in silico tools result in valuable information regarding environmental fate of the TPs from selected compounds. Furthermore, it was shown that photo-TPs formed in the aquatic environment should be taken into account not only the parent compound and its decay.
The principle of this thesis was to study the environmental fate of three highly used psychotropic drugs and this achieved through: 1) examining the biodegradability of TMI, DMI and CPTX, 2) studying the behaviour of TMP, DMI and CPTX in photodegradation tests using Xe and UV lamps with studying the effect of different environmental conditions on their UV-photodegradation behaviour, 3) monitoring the primary elimination of TMP, DMI and CPTX during photodegradation and biodegradation tests using HPLC, and measuring their degree of mineralization by means of dissolved organic carbon analyser (DOC), 4) elucidating the structures of the transformation products (TPs) which formed during the degradation of TMI, DMI and CPTX by using LC-MS/MS analysis, 5) analysing the biodegradability of their TPs by laboratory tests and in-silico assessments in order to determine the fate and persistence of these TPs in the aquatic environment, 6) conducting in-silico toxicity predictions for the selected psychotropic drugs and their TPs in human (carcinogenicity, genotoxicity and mutagenicity) and in eco-system (toxicity to microorganisms and toxicity in rainbow trouts). As an overall conclusion, the present work demonstrates that a combination of laboratory simulation tests, LC-MS/MS analysis and in-silico tools result in valuable new information regarding environmental fate of three important psychotropic drugs and their TPs. This dissertation also highlights that different environmental conditions such as temperature, initial drug concentration and pH can differently affect the degradation behaviour of pharmaceuticals even when they are highly structurally related. Therefore, one cannot conclude from one pharmaceutical to another but each one needs to be investigated individually and this present a great challenge for risk assessment kinetics of chemicals in the aquatic environment. The results presented here showed that the investigated pharmaceuticals and their TPs can negatively affect the environment which may be harmful to the ecosystem as they might have been present for decades in the aquatic environment without any knowledge of their environmental fate or connected risk. Therefore, further work needs to be done including analysis of environmental samples (e.g., surface waters), as well as laboratory toxicity tests to further expand knowledge on their exact environmental impact.
As modern society progresses, waste treatment becomes a pressing issue. Not only are global waste amounts increasing, but there is also an unmet demand for sustainable materials (e.g. bioplastics). By identifying and developing processes, which efficiently treat waste while simultaneously generating sustainable materials, potentially both these issues might be alleviated. Following this line of thought, this dissertation focuses on procedures for treatment of the organic fraction of waste. Organic waste is a suitable starting material for microbial fermentation, where carbohydrates are converted to smaller molecules, such as ethanol, acetic acid, and lactic acid. Being the monomer of the thermoplastic poly-lactic acid, lactic acid is of particular interest with regard to bioplastics production and was selected as target compound for this dissertation. Organic waste acted as substrate for non-sterile batch and continuous fermentations. Fermentations were initiated with inoculum of Streptococcus sp. or with indigenous consortium alone. During batch mode, concentration, yield, and productivity reached maximum values of 50 g L−1, 63%, and 2.93 g L−1 h −1. During continuous operation at a dilution rate of 0.44 d−1, concentration and yield were increased to 69 g L−1 and 86%, respectively, while productivity was lowered to 1.27 g L−1 h −1 . To fully exploit the nutrients present in organic waste, phosphate recovery was analyzed using seashells as adsorbent. Furthermore, the pattern of the indigenous consortium was monitored. Evidently, a very efficient Enterococcus strain tended to dominate the indigenous consortium during fermentation. The isolation and cultivation of this consortium gave a very potent inoculum. In comparison to the non-inoculated fermentation of a different organic waste batch, addition of this inoculum lead to an improved fermentation performance. Lactic acid yield, concentration, and molar selectivity could be increased from 38% to 51%, 49 g L−1 to 65 g L−1, and 46% to 86%, respectively. Eventually, fermentation process data was used to perform techno-economic analysis proposing a waste treatment plant with different catchment area sizes ranging from 50,000 to 1,000,000 people. Economically profitable scenarios for both batch and continuous operation could be identified for a community with as few as 100,000 inhabitants. With the experimental data, as well as techno-economic calculations presented in this dissertation, a profound contribution to sustainable waste treatment and material production was made.
The emission of anthropogenic trace substances into the aquatic environment continuously poses challenges to water suppliers. The contamination of raw waters with organic trace substances requires complex water treatment processes to secure drinking water quality. The routine monitoring of these raw waters as well as the behavior and fate of organic trace substances during different treatment processes is of great interest to recognize and counter potential dangers at an early stage. Non-target screening using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) allows the detection of thousands of compounds within a single run and covers known as well as unknown substances. Compared to the established analytical techniques, this is a decisive advantage for the monitoring of raw and process waters during water treatment. While the analytical technique LC-HRMS has undergone significant developments in recent years, the algorithms for data processing reveal clear weaknesses. This dissertation therefore deals with reliable processing strategies for LC-HRMS data. The first part of this work seeks to highlight the problematics of false positive and false negative findings. Based on repeated measurements, various strategies of data processing were assessed with regard to the repeatability of the results. To ensure that real peaks were barely or not removed by the filtering procedure, samples were spiked with isotope-labeled standards. The results emphasize that the processing of sample triplicates results in sufficient repeatability and that the signal fluctuation across the triplicates emerged as a powerful filtering criteria. The number of false positives and false negatives could be significantly reduced by the developed strategies which consequently improve the validity of the data. The second part of this thesis addresses the development of processing strategies particularly aimed at assessing water treatment processes. The detected signals were tracked across the treatment process and classified based on their fold changes. A more reliable signal classification was achieved by implementing a recursive integration approach. Special integration algorithms allow a reliable signal classification even though the signal to be compared was below the intensity threshold. Different combinations of replicates of process influents and effluents were processed for evaluating the repeatability. The good repeatability was indicated by the results of both the plausibility checks and the ozonation process (ozonation of pretreated river water) and thus points to high reliability. The applicability of the developed strategies to real world applications is demonstrated in the last part of this work. Besides the prioritization of the generated results, the main focus was the identification of recognized compounds. The developed strategies clearly improve the validity of the underlying data. The combination of LC-HRMS analysis with reliable processing strategies opens up multiple possibilities for a more comprehensive monitoring of water resources and for the assessment of water treatment processes. The processing strategies and validation concepts may be easily transferred to other research fields.
Organophosphorus flame retardants and plasticizers (OPEs) have been utilized for decades as plasticizers and, to a lesser extent, as flame retardants in various consumer products to improve their material properties. The research presented in this thesis investigated the occurrence, distribution and transport of OPEs with a focus on the coastal and estuarine environment. Due to the wide range of physicochemical properties of OPEs, the environmental fate and behaviour of OPEs was investigated over a range of compartments, starting from the atmospheric occurrence to the aquatic phase and the behaviour in sediments. The aim was to gather information on the OPE contamination situation in the coastal and estuarine environments, to identify specific contamination patterns for source assessment and to investigate the distribution behaviour of OPEs between gas- and particle-phases to evaluate their environmental transport mechanism. To achieve these scientific goals, sensitive and robust chemical analytical methods for the detection and quantification of OPEs in a variety of environmental samples using gas-chromatography coupled with tandem mass spectrometry were developed. Water samples were removed along the Elbe and Rhine Rivers to test the hypothesis of whether specific point sources, such as wastewater treatment plants, are the major input pathways for OPE contamination in rivers. A total of 65 water samples, including an intensive measurement campaign during the flood event in 2013 at the Elbe, was taken and analysed for OPEs. No obvious point sources were identified along either of the rivers analysed. No significant increase or decrease in the OPE concentrations or a change in patterns were observed over a transect of over 300 km at the Elbe, with an increase in water discharge of 2.5. This finding suggested that the OPE input in large rivers is primarily driven by diffuse sources, such as surface runoff, or by minor point sources rather than local point sources. To examine the specific pattern of OPE contamination in individual rivers and estuaries, 37 sediment samples from 8 rivers in Europe and China were analysed. With this analytical data, a fingerprint analysis of the OPE patterns identified could be conducted. All the rivers investigated in Europe displayed a very similar fingerprint. In contrast, the fingerprint from China differed significantly from the one in Europe. For example, in China, the OPE restricted in Europe, Tris(2-chloroethly)phosphate, was found to be one of the major OPE components, while Tris(2-butoxyethyl) phosphate, a major compound in Europe, was negligible in China. The investigation showed that the fingerprinting analysis is a useful tool to identify different regions or characterize specific rivers regarding their OPE contamination. In addition, it could be shown that legislative restriction and processes have an impact on local or even EU-wide contamination patterns. At a coastal site next to the German city of Büsum, 58 air samples were taken over one year. Using the newly developed analytical method, it was possible to analyse the gas, as well as the particle phase, of the samples collected with very low detection limits for OPEs. In contrast to expectations, no annual trend in OPE concentrations, phase distributions or patterns was observed, but the investigation of the phase distribution challenged the previous scientific consensus that OPEs occur as primarily bound to particles in the atmosphere. Several compounds were detected in significant amounts in the gas phase. To validate these novel results, a model analysis based on the chemical properties of OPEs was conducted using three different phase distribution models. The results from the environmental data were strongly supported by the simulations, and the formal knowledge could be refuted. Consequently, the atmospheric transport assumptions and estimations about the long-range transport of OPEs have to be reassessed because compounds in the gas phase undergo other types of transport degradation and elimination mechanisms than particle-boundones. The novel findings presented in this thesis challenged an important aspect regarding the perceived scientific knowledge about the behaviour of OPEs in the environment and call on the scientific community to reassess the environmental behaviour of OPEs. The insights presented on the patterns highlight the impact of environmental policies and regulatory mechanisms to work towards the final goal of a good environmental status and the avoidance of adverse effects of discarded chemicals on humans and the environment.
Recent studies have confirmed that the aquatic ecosystem is being polluted with an unknown cocktail of pharmaceuticals, their metabolites and/or their transformation products (TPs). Although individual pharmaceuticals are typically present at low concentrations, their continuous input into the aquatic ecosystem and their toxic and persistent presence are the major environmental concerns. Therefore, it is necessary to assess the environmental risk caused by these aquatic pollutants. Data on exposure are required for quantitative risk assessment of parent compounds and their transformation products (TPs) and/or metabolites. Such data are mostly missing, especially for TPs, because of the non-availability of TPs and very often metabolites for experimental testing. Therefore, the application of different in silico tools for qualitative risk assessment can be used. Also, the presence of these micro-pollutants (active pharmaceutical ingredients, APIs) in the aquatic cycle are increasingly seen as a challenge to the sustainable management of water resources worldwide due to ineffective effluent treatment and other measures for their input prevention. Given the poor prognosis for effluent treatment (‘end of the pipe’ approach) for input prevention of APIs in the environment, it is necessary to focus on the ‘beginning of the pipe’ strategy. The very beginning of the pipe is the molecules themselves. Therefore, novel approaches are needed like designing greener pharmaceuticals, i.e. better biodegradable ones in the aquatic environment after their release. Therefore, the present research work focused on two important topics a) assessment of the environmental risk associated with the presence of highly prescribed drugs and their TPs; b) demonstrating the feasibility of the ‘benign by design’ concept for designing biodegradable drug derivatives, which will have the better biodegradability in the environment after their release. The present thesis includes four research articles (1-4) which address these approaches. The first article is about the qualitative environmental risk assessment using the example of transformation products formed during photolysis (photo-TPs) of Diatrizoic acid (DIAT). Photolysis is the chemical reaction in which the compound is broken down by photons and often in combination with hydroxyl radicals. Photolysis is the most common abatement process of micro-pollutants in the environment. The qualitative risk assessment of DIAT and selected photo-TPs was performed by the PBT approach (i.e. Persistence, Bioaccumulation and Toxicity), using chemical analysis, experimental biodegradation test assays, QSAR models with several different toxicological endpoints and in silico read-across approaches. The second article addresses a tiered approach of implementing green and sustainable chemistry principles for theoretically designing better biodegradable and pharmacologically potent pharmaceuticals derivatives. Photodegradation process coupled with LC-MSn analysis, biodegradability testing and in silico tools such as quantitative structure-activity relationships (QSAR) analysis and molecular docking proved to be a very significant approach for the preliminary stages of designing chemical structures that would fit into the ´benign by design´ concept in the direction of green and sustainable pharmacy. Metoprolol (MTL) was used as an example. The third article was also the conceptual framework to get new drug derivatives that are biodegradable in order to tackle the global challenge of micro-pollutants in the aquatic cycle. This study increased the knowledge about the role of the attachment of certain functionalities to the parent drug molecule for its biodegradability whilst conserving drug-likeness. This approach was in the past a totally neglected issue within drug development. Atenolol (ATL), a selective β1 blocker, was selected as an example to incorporate the additional attribute such as biodegradability into its molecular structure while conserving its substructures responsible for β adrenergic receptor blocker activity. In fourth article, the concept of designing green biodegradable pharmaceuticals has been proven through expanded experimental analysis setting out from the experiences collected as described in article two and three. This study could be considered as a more extensive feasibility study of rational design of green drug derivatives. The non-selective β-blocker Propranolol (PPL) was used as an example. The risk assessment study (Article #1) contributes in enhancing the existing knowledge about the life cycle and behavior (fate) of pharmaceuticals with a special focus on photo-TPs which are generally formed during advanced effluent treatment and enter as such into the environment. Based on the obtained results, the application of the in silico tools for qualitative risk assessment analysis increased knowledge space about the environmental fate of TPs in case of their non-availability for experimental testing. The benign by design studies (Article #2-4) were based on the knowledge and experience collected during the work on DIAT. It demonstrated the feasibility of a novel approach of designing comparatively better degradable and pharmacological potent derivatives through the implementation of ´green chemistry´ principles. However, the present approach is in the juvenile stage and further knowledge has to be collected beforehand for the full implementation of this approach into drug development.
Among all attenuation processes, biodegradation plays one of the most important role and is one of the most desirable processes in the environment. To assess biodegradation, a variety of biodegradation test procedures have been developed by several international organizations. OECD guidelines for ready biodegradability testing represent one of the most prominent group of internationally used screening biodegradation tests (series 301A-F). These tests are usually very simple in their designs and allow for the fast and cheap screening of biodegradability. However, because of their stringency, the test conditions are not close to simulating environmental conditions and may lead to unrealistic results. To overcome these limitations, OECD introduced simulation tests which are designed to investigate the behavior of chemicals in specified environmentally relevant compartments. Despite the fact that simulation tests give more insight into the fate of chemicals in the environment, they are not applied frequently as they are often tedious, time consuming and expensive. Consequently, there is a need to provide a new biodegradation testing method that would combine complex testing environment as in simulation tests, easiness in handling and good data repeatability as in screening biodegradation tests. Another challenge is an adaption of the existing biodegradation testing methods to new types of samples, i.e. mixtures of transformation products (TPs). The research on the presence of pharmaceuticals in the environment gained momentum in the 1990s; since then, it has been growing. Their presence in the environment is a wellestablished fact. A wide range of pharmaceuticals is continuously detected in many environmental compartments such as surface waters, soils, sediments, or ground waters. After pharmaceuticals reach the natural aquatic environment they may undergo a number of processes such as: photolysis (under direct sunlight), hydrolysis, oxidation and reduction reactions, sorption, biodegradation (by bacteria of fungi), and bioaccumulation. These processes, may cause their elimination from aquatic environment, if reaction is complete, or creation of new compounds i.e., transformation products (TPs). What is more, processes, like chlorination and advanced oxidation processes (AOPs), such as H2O2/UV, O3/UV, TiO2/UV, Fenton, and photo-Fenton, or UV treatment which might be applied in water or wastewater treatment, may also lead to the TPs introduction into aquatic environment. The research on the TPs brings many new challenges. From one side, there is a constant need for the the development of a sensitive and reliable analytical separation, detection, and structure elucidation methods. Additionally, there is a need for the preparation of appropriate assays for the investigation of properties of new compounds, especially those answering the question if TPs pose a higher risk to the aquatic ecosystems than their parent compounds. Among numerous groups of pharmaceuticals, two are of great importance: antibiotics since they might promote emergence and maintenance of antimicrobial resistance in the aquatic environment; and cytostatic drugs. Cytostatic drugs can exert carcinogenic, mutagenic and/or teratogenic effects in animals and humans. The challenges of biodegradation testing presented in this thesis, encompasses these different areas of interest and was divided into three objectives: 1) Identification of the knowledge gaps and data distribution of the two groups of pharmaceuticals antibiotics and cytostatic drugs (article I); 2) Increasing the knowledge on biodegradation of cytostatic drugs and their TPs (articles II, III, and IV) and 3) Establishment of a biodegradation test with closer to simulation tests conditions, that could be affordable and to support better understanding on processes in water sediment interface construction - screening water-sediment test. Further validation of the test with an insight into sorption and desorption processes (articles V and VI).