Filtern
Schlagworte
- Wärmespeicher (2) (entfernen)
Hochtemperatur-Aquiferwärmespeicher erleichtern Wärmesystemen durch eine saisonale Lastverschiebung die Erschließung und Integration von erneuerbaren Wärmequellen. Ein mittleres Temperaturniveau von >50 Grad Celsius ermöglicht zumeist eine direkte Entladung ohne einen anschließenden Temperaturhub über eine Wärmepumpe. Aufgrund der thermischen Trägheit von ATES-Systemen ist die Berücksichtigung von Lastfalländerungen durch jährlich variierende Lastprofile besonders in der Einschwingphase sinnvoll. Da es bis zu 20 Jahre dauern kann, bis der Aquifer einen quasistationären Zustand erreicht, konnte in Langzeitstudien ein großer Einfluss von unterschiedlichen Lastprofilen auf energetische und finanzielle Simulationsergebnisse nachgewiesen werden. Zur Verbesserung der Investitionsplanung wurde ein Verfahren entwickelt, das sowohl die Prognosefähigkeit als auch die Prognosegenauigkeit von Energiesystem- und Wirtschaftlichkeitsanalysen erhöht, indem über einen wahrscheinlichkeitsbasierten Ansatz (Monte-Carlo-Temperaturschätzung) Normalverteilungsfunktionen für gewünschte Auswertungsgrößen (z.B. Kapitalwert) abgeleitet werden können. Aus 2000 Simulationsjahren wurde über konzeptspezifische Verteilungsfunktionen der wahrscheinlichste Eintrittsfall abgeleitet und zu einem repräsentativen Szenario aggregiert. Das aggregierte Szenario mündet in ein konzeptspezifisches Gleichungssystem, das mit den Freiheitsgraden Energiepreise, Kalkulationszinssatz und Förderanteil gelöst wird. Im Gegensatz zu der etablierten Methode, die Wirtschaftlichkeitsberechnung im Anschluss an eine energetische Systemsimulation anzuhängen, wurde in dieser Arbeit ein holistisches Modell in TRNSYS entwickelt, das für jeden Simulationszeitschritt simultan Energie- und Zahlungsströme berechnet. In dem Modell konnten Verbesserungen in der Prognosegenauigkeit um den Faktor 20 nachgewiesen werden. Mit dem neuen Verfahren kann die Frage der Wirtschaftlichkeit nicht nur mit ja oder nein beantwortet werden, sondern zusätzlich mit der jeweiligen Eintrittswahrscheinlichkeit belegt werden.
Heating is most important part of thermal energy demand, and accounts for large amounts ofenergy consumption in cold regions. Renewable energy sources will be of great importance inorder to cover future energy demands. However, their intermittency is rightly considered asinconvenient. Thus, a more effective management of demand, coupled with efficient storagesystems is required. Based on this perception, thermal systems coupled with electricityproduction have been efficiently designed, they are the so called “combined heat and power”(micro-CHP). Nonetheless, heat losses from the thermal part of their system lead to electricityfluctuation. Therefore, the use of micro-CHP in combination with a volume-efficient and nearlylossless heat storage system to counteract electricity fluctuations is a viable solution.The heat storage system in this work is based on reversible thermochemical reactions, suchas dehydration and hydration of inorganic salts, which exhibits very high energy density (up to628 kWh·m-3 of storage material). The chosen inorganic salt (SrBr2·6H2O) reacting with purewater vapour operates within a closed system. The objective of this work is to design a systemthat thermodynamically matches the combination with micro-CHP. Therefore, investigationshave been performed from the material at micro-scale to the system at lab-scale. Models weredeveloped on the basis of heat and mass transfer with chemical reaction and were done in orderto numerically analyse the system. Experiments were additionally performed to consolidate thenumerical tools for future studies. Characterization experiments have been designed and tested.Thermo-physical properties (thermal conductivity, specific heat capacity, permeability, chemicalkinetics) of the reactive salt were then determined to be used as parameters into the sodeveloped models.The numerical simulations lead to the time-space evolution of heating fluid, reactive bedtemperatures and reactor pressure. The originality of this study is to model the coupled heat andmass transfer with chemical reaction on a 3D geometry to be close to the reality. Results help tonumerically and experimentally analyse the thermochemical heat storage performances. Thebed energy density is experimentally found to be 531 kWh·m-3 of salt hydrate. Based on thecondensation temperature during the experimentation, a reactor energy density of 140 kWh·m-3and a storage capacity of 65 kWh with a thermal efficiency of 0.78 are obtained. This systemproves the recovery capacity of more than 2/3 of the input energy. Various aspects of design andrecommendation for optimisation aspect that could help during prototype development aretaken into account and addressed. Comparison simulation-experiment is then performed anddiscussed, showing encouraging results, even if limited at lab-scale.