Filtern
Erscheinungsjahr
Dokumenttyp
- Dissertation (23)
- Habilitation (1)
Schlagworte
- Arzneimittel (4)
- Abwasser (2)
- Biodegradation (2)
- Pestizid (2)
- Photolysis (2)
- Umweltbelastung (2)
- Abgasrückführung (1)
- Abwasserbelastung (1)
- Antibiotikum (1)
- Anticancer Drug (1)
Institut
- Institut für Nachhaltige Chemie und Umweltchemie (INUC) (24) (entfernen)
The emission of anthropogenic trace substances into the aquatic environment continuously poses challenges to water suppliers. The contamination of raw waters with organic trace substances requires complex water treatment processes to secure drinking water quality. The routine monitoring of these raw waters as well as the behavior and fate of organic trace substances during different treatment processes is of great interest to recognize and counter potential dangers at an early stage. Non-target screening using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) allows the detection of thousands of compounds within a single run and covers known as well as unknown substances. Compared to the established analytical techniques, this is a decisive advantage for the monitoring of raw and process waters during water treatment. While the analytical technique LC-HRMS has undergone significant developments in recent years, the algorithms for data processing reveal clear weaknesses. This dissertation therefore deals with reliable processing strategies for LC-HRMS data. The first part of this work seeks to highlight the problematics of false positive and false negative findings. Based on repeated measurements, various strategies of data processing were assessed with regard to the repeatability of the results. To ensure that real peaks were barely or not removed by the filtering procedure, samples were spiked with isotope-labeled standards. The results emphasize that the processing of sample triplicates results in sufficient repeatability and that the signal fluctuation across the triplicates emerged as a powerful filtering criteria. The number of false positives and false negatives could be significantly reduced by the developed strategies which consequently improve the validity of the data. The second part of this thesis addresses the development of processing strategies particularly aimed at assessing water treatment processes. The detected signals were tracked across the treatment process and classified based on their fold changes. A more reliable signal classification was achieved by implementing a recursive integration approach. Special integration algorithms allow a reliable signal classification even though the signal to be compared was below the intensity threshold. Different combinations of replicates of process influents and effluents were processed for evaluating the repeatability. The good repeatability was indicated by the results of both the plausibility checks and the ozonation process (ozonation of pretreated river water) and thus points to high reliability. The applicability of the developed strategies to real world applications is demonstrated in the last part of this work. Besides the prioritization of the generated results, the main focus was the identification of recognized compounds. The developed strategies clearly improve the validity of the underlying data. The combination of LC-HRMS analysis with reliable processing strategies opens up multiple possibilities for a more comprehensive monitoring of water resources and for the assessment of water treatment processes. The processing strategies and validation concepts may be easily transferred to other research fields.
Among all attenuation processes, biodegradation plays one of the most important role and is one of the most desirable processes in the environment. To assess biodegradation, a variety of biodegradation test procedures have been developed by several international organizations. OECD guidelines for ready biodegradability testing represent one of the most prominent group of internationally used screening biodegradation tests (series 301A-F). These tests are usually very simple in their designs and allow for the fast and cheap screening of biodegradability. However, because of their stringency, the test conditions are not close to simulating environmental conditions and may lead to unrealistic results. To overcome these limitations, OECD introduced simulation tests which are designed to investigate the behavior of chemicals in specified environmentally relevant compartments. Despite the fact that simulation tests give more insight into the fate of chemicals in the environment, they are not applied frequently as they are often tedious, time consuming and expensive. Consequently, there is a need to provide a new biodegradation testing method that would combine complex testing environment as in simulation tests, easiness in handling and good data repeatability as in screening biodegradation tests. Another challenge is an adaption of the existing biodegradation testing methods to new types of samples, i.e. mixtures of transformation products (TPs). The research on the presence of pharmaceuticals in the environment gained momentum in the 1990s; since then, it has been growing. Their presence in the environment is a wellestablished fact. A wide range of pharmaceuticals is continuously detected in many environmental compartments such as surface waters, soils, sediments, or ground waters. After pharmaceuticals reach the natural aquatic environment they may undergo a number of processes such as: photolysis (under direct sunlight), hydrolysis, oxidation and reduction reactions, sorption, biodegradation (by bacteria of fungi), and bioaccumulation. These processes, may cause their elimination from aquatic environment, if reaction is complete, or creation of new compounds i.e., transformation products (TPs). What is more, processes, like chlorination and advanced oxidation processes (AOPs), such as H2O2/UV, O3/UV, TiO2/UV, Fenton, and photo-Fenton, or UV treatment which might be applied in water or wastewater treatment, may also lead to the TPs introduction into aquatic environment. The research on the TPs brings many new challenges. From one side, there is a constant need for the the development of a sensitive and reliable analytical separation, detection, and structure elucidation methods. Additionally, there is a need for the preparation of appropriate assays for the investigation of properties of new compounds, especially those answering the question if TPs pose a higher risk to the aquatic ecosystems than their parent compounds. Among numerous groups of pharmaceuticals, two are of great importance: antibiotics since they might promote emergence and maintenance of antimicrobial resistance in the aquatic environment; and cytostatic drugs. Cytostatic drugs can exert carcinogenic, mutagenic and/or teratogenic effects in animals and humans. The challenges of biodegradation testing presented in this thesis, encompasses these different areas of interest and was divided into three objectives: 1) Identification of the knowledge gaps and data distribution of the two groups of pharmaceuticals antibiotics and cytostatic drugs (article I); 2) Increasing the knowledge on biodegradation of cytostatic drugs and their TPs (articles II, III, and IV) and 3) Establishment of a biodegradation test with closer to simulation tests conditions, that could be affordable and to support better understanding on processes in water sediment interface construction - screening water-sediment test. Further validation of the test with an insight into sorption and desorption processes (articles V and VI).
Air quality models are important tools which are utilized for a large field of application. When combined with data from observations, models can be employed to create a comprehensive estimation of the past and current distribution of pollutants in the atmosphere. Moreover, projections of future concentration changes due to changing emissions serve as an important decision basis for policymakers. For the determination of atmospheric concentrations of air pollutants by means of numerical modelling it is essential to possess a model which is able to create anthropogenic and biogenic emissions with a temporally and spatially high resolution. The emission data is needed as input for a chemistry transport model which calculates transport, deposition, and degradation of air pollutants. To evaluate the impact of changing emissions on the environment a flexible emission model with the capability to create diverse emission scenarios is needed. Further, it is important to always take into account a variety of different species to properly represent the major chemical reactions in the atmosphere (e.g. ozone chemistry, aerosol formation). Currently there are only a few high resolution emission datasets available for Europe. The amount of substances included in these datasets, however, is limited. Moreover, they can not be used as basis for the creation of new emission scenarios. To enable the creation of emission scenarios in the course of this doctoral thesis the American emission model SMOKE was adopted and modified. On the basis of a multitude of different georeferenced datasets, official statistics, and further model results the newly created emission model “SMOKE for Europe” is capable of creating hourly emission data for the European continent with a spatial resolution of up to 5x5km2. In order to demonstrate the universal applicability of the emission model the carcinogenic species benzo[a]pyrene (BaP) was exemplarily implemented into the model. BaP belongs to the group of polycyclic aromatic hydrocarbons. Because of its high toxicity the European Union introduced an annual target value of 1 ng/m3 in January 2010. SMOKE for Europe was used to create a variety of emission scenarios for the years 1980, 2000, and 2020. These emission scenarios were then used to determine the impact of emission changes on atmospheric concentrations of BaP and to identify regions which exceed the European target value. Additionally the impact of different legislation and fuel use scenarios on the projected atmospheric concentrations in 2020 was investigated. Furthermore, additional use cases for a flexible emission model are pointed out. The SMOKE for Europe model was used to simulate the transport of volcanic ash after the eruption of the Icelandic volcano Eyjafjallajokull in March 2010. By comparison of modelled concentrations for different emission scenarios with observations from remote sensing and air plane flights distribution and concentration of the volcanic ash over Europe was estimated. The results of this thesis have been presented in four scientific papers published in international peerreviewed journals. The papers are reprinted at the end of this thesis.
Um das noch bestehende Reichweitenproblem von Elektrofahrzeugen zu lösen, sind Fahrzeugkonzepte wie Plug-in Hybridfahrzeuge sehr vielversprechend, sofern mit ihm überwiegend im Batteriebetrieb gefahren wird. Sie kombinieren die Vorteile des Verbrennungsmotors und des Elektromotors, sodass das lokale Emissionsproblem in Ballungszentren gelöst werden kann, ohne dass der Kunde dabei auf die Reichweite verzichten muss. Wenn das Fahrzeug allerdings überwiegend für Kurzstrecken genutzt wird, sind alterungsbedingte Veränderungen des Kraftstoffes möglich, da dieser länger im Tank verbleibt als üblich. In dieser Arbeit wird ein Konzept zur sensorischen Bestimmung der Qualität des Kraftstoffes vorgestellt. Hierzu wurde ein Prototyp entwickelt, in dem mithilfe des Real- und Imaginärteils der Permittivität alternde Kraftstoffe erkannt werden können. Dabei konnte durch das frequenzabhängige Permittivitätssignal des Sensors spezifisch zwischen nieder- und hochmolekularen Oxidationsprodukten in Kraftstoffen unterschieden werden. Da das Verbrennungs- und Emissionsverhalten des Motors von der Kraftstoffmischung vorgegeben ist, bietet eine zusätzliche sensorische Erfassung der Kraftstoffzusammensetzung weitere Optimierungspotenziale, um Emissionen zu reduzieren: So ist das Motormanagement im Fahrzeug zumeist auf Referenzkraftstoffe mit gleichbleibender Qualität abgestimmt. Variable Kraftstoffzusammensetzungen, die durch die Erdöllagerstätte und den zusätzlichen Konversionsverfahren zur Herstellung von fortschrittlichen Kraftstoffen vorgegeben sind, werden in dieser Anpassungsstrategie bisher nicht berücksichtigt. Als weitere Aufgabe wird in dieser Arbeit daher ein multisensorischer Ansatz verfolgt, wonach zusätzlich zur Kraftstoffalterung noch die Kraftstoffzusammensetzung erkannt werden kann. Insgesamt bietet die Sensorik das Potenzial zur kontinuierlichen Kraftstoffüberwachung in Plug-in Hybridfahrzeugen, um so einen Beitrag zum sicheren und nachhaltigen Betrieb solcher Fahrzeuge gewährleisten zu können.
Heating is most important part of thermal energy demand, and accounts for large amounts ofenergy consumption in cold regions. Renewable energy sources will be of great importance inorder to cover future energy demands. However, their intermittency is rightly considered asinconvenient. Thus, a more effective management of demand, coupled with efficient storagesystems is required. Based on this perception, thermal systems coupled with electricityproduction have been efficiently designed, they are the so called “combined heat and power”(micro-CHP). Nonetheless, heat losses from the thermal part of their system lead to electricityfluctuation. Therefore, the use of micro-CHP in combination with a volume-efficient and nearlylossless heat storage system to counteract electricity fluctuations is a viable solution.The heat storage system in this work is based on reversible thermochemical reactions, suchas dehydration and hydration of inorganic salts, which exhibits very high energy density (up to628 kWh·m-3 of storage material). The chosen inorganic salt (SrBr2·6H2O) reacting with purewater vapour operates within a closed system. The objective of this work is to design a systemthat thermodynamically matches the combination with micro-CHP. Therefore, investigationshave been performed from the material at micro-scale to the system at lab-scale. Models weredeveloped on the basis of heat and mass transfer with chemical reaction and were done in orderto numerically analyse the system. Experiments were additionally performed to consolidate thenumerical tools for future studies. Characterization experiments have been designed and tested.Thermo-physical properties (thermal conductivity, specific heat capacity, permeability, chemicalkinetics) of the reactive salt were then determined to be used as parameters into the sodeveloped models.The numerical simulations lead to the time-space evolution of heating fluid, reactive bedtemperatures and reactor pressure. The originality of this study is to model the coupled heat andmass transfer with chemical reaction on a 3D geometry to be close to the reality. Results help tonumerically and experimentally analyse the thermochemical heat storage performances. Thebed energy density is experimentally found to be 531 kWh·m-3 of salt hydrate. Based on thecondensation temperature during the experimentation, a reactor energy density of 140 kWh·m-3and a storage capacity of 65 kWh with a thermal efficiency of 0.78 are obtained. This systemproves the recovery capacity of more than 2/3 of the input energy. Various aspects of design andrecommendation for optimisation aspect that could help during prototype development aretaken into account and addressed. Comparison simulation-experiment is then performed anddiscussed, showing encouraging results, even if limited at lab-scale.
Die Emissionen des Kraftfahrzeugverkehrs stellen eine bedeutende Quelle für Luftschadstoffe dar. Um die Luftbelastung durch Kfz zu vermindern, wurden in der Europäischen Gemeinschaft 1970 Grenzwerte für Kraftfahrzeug-Emissionen eingeführt, die sukzessive verschärft werden. Bis 2005 werden die Grenzwerte für Pkw auf ca. 3 % des Ausgangsn iveaus gefallen sein.
Über 90 % der Schadstoffe aus motorischer Verbrennung entstehen in der Kaltstartphase und bei Lastwechseln. Eine Optimierung dieser instationären Betriebszustände des Motors ist notwendig, um zukünftige Emissionsgrenzwerte einhalten zu können Die zur Bestimmung der Abgasemissionen vorgeschriebene Test- und Analyseprozedur ermittelt
lediglich einen integralen Emissionswert über einen vorgeschriebenen Fahrzyklus. Aussagen über den Zeitpunkt der Entstehung und die Höhe einzelner Konzentrationsspitzen werden mit dieser Methode nicht erhalten. Diese Informationen sind jedoch für Entwickler von Motoren und Abgasnachbehandlungssystemen von besonderer Bedeutung. Sie benötigen für die Optimierung eine Analysemethode, die in der Lage ist, dynamische Konzentrationsverläufe von Abgaskomponenten im Rohabgas zu erfassen. Die notwendige Messfrequenz ist abhängig von der Messaufgabe und sollte nach Möglichkeit eine höhere zeitliche Auflösung aufweisen als der zu beurteilende Prozess. Neben der Dynamik des Analysengerätes ist die Ausführung der Probenahme hierbei von ent
scheidender Bedeutung.
Siliziumorganische Substanzen sind aus dem Alltag kaum wegzudenken. Sie kommen in vielfältiger Form vor und finden durch ihre Stabilität in vielen Produkten des Haushalts und der Industrie Anwendung. Eine Freisetzung in die Umwelt ist unvermeidbar. Siliziumorganische Substanzen konnten bereits in allen Umweltkompartimenten (Luft, Wasser, Boden) analytisch nachgewiesen werden. Welche Risiken von dieser Stoffgruppe ausgehen, ist noch nicht abschließend geklärt. Dennoch gibt es Hinweise auf negative Auswirkungen auf Mensch und Umwelt. Deshalb sollten Strukturen in siliziumorganischen Substanzen untersucht werden, die einen Abbau in der Umwelt begünstigen, um die Akkumulation dieser Stoffe in der Umwelt zu verringern. Dafür wurden diverse biotische und abiotische Abbautests mit unterschiedlichen siliziumorganischen Substanzen durchgeführt. Der Fokus der vorliegenden Arbeit lag vor allem in der biologischen Abbaubarkeit der Substanzen. Es wurden die Organisation for Economic Co-operation and Development (OECD)-konformen Tests Closed-Bottle-Test (CBT, OECD 301D) und Manometrischer Respirationstest (MRT, OECD 301F) durchgeführt. Die Hydrolysierbarkeit wurde mithilfe des Hydrolysetests OECD 111 bei unterschiedlichen pH-Werten untersucht. Bei bestimmten Substanzgruppen ohne biologischen Abbau wurde das Verhalten der Substanzen bei Bestrahlung mit verschiedenen Bestrahlungsquellen untersucht. Die Analyse der Primärelimination der siliziumorganischen Substanzen erfolgte je nach Substanzeigenschaften mithilfe der Hochleistungsflüssigkeitschromatografie gekoppelt mit einem Spektrometer mit ultraviolettem und sichtbarem Licht (HPLC-UV/Vis) oder der Gaschromatografie gekoppelt mit einem Massenspektrometer (GC-MS). Die Transformationsprodukte wurden hingegen mithilfe der Flüssigkeitschromatografie gekoppelt mit einem Mehrfach-Massenspektrometer (LC-MSn) analysiert. Für eine umfassende Bewertung des biologischen Abbaus von siliziumorganischen Substanzen wurden ein Vergleich mit analogen Kohlenstoffverbindungen und eine Aufstockung mit Daten aus der Datenbank der Europäischen Chemikalien Agentur (ECHA) durchgeführt. Die Gruppierung der Substanzen nach ihren Strukturmerkmalen wurde hinzugezogen, um Rückschlüsse auf die Abbaubarkeit zu ziehen. Eine besser biologisch abbaubare Grundstruktur brachte für die Benzenderivate keine Verbesserung der biologischen Abbaubarkeit. Dennoch hatte die Einführung von +M-Gruppen am Aromaten einen positiven Einfluss auf die Geschwindigkeit und den Grad des photolytischen Abbaus. Die Bestrahlungsquelle hatte ebenfalls einen deutlichen Einfluss auf die Eliminierungsrate während des Photolyseexperiments. Mit einer Veränderung der Wellenlängen in den kurzwelligen Bereich und der daraus resultierenden energiereicheren Strahlung konnten die Substanzen schneller und teilweise vollständig primär eliminiert werden. Bei allen Abbaupfaden hatte die Hydrolyse eine entscheidende Rolle und wurde als einer der Hauptabbauprozesse charakterisiert. Bei einer Verbindung wurde im Nachgang an die biotischen und abiotischen Abbautests eine ausführliche Aufklärung der elf gebildeten Transformationsprodukte vorgenommen. Um den Einfluss von Silizium in organischen Substanzen auf die biologische Abbaubarkeit zu untersuchen, wurde der direkte Vergleich von siliziumorganischen Substanzen und deren Kohlenstoffanaloga im CBT durchgeführt. Dabei hat sich gezeigt, dass drei von fünf Kohlenstoffverbindungen und keine siliziumorganische Verbindung als leicht biologisch abbaubar eingestuft werden konnten. In allen bis auf einen Fall konnten für die Kohlenstoffverbindungen höhere Abbauraten im CBT beobachtet werden. Die Hydrolyse wurde als erforderlicher Schritt vor dem biologischen Abbau von siliziumorganischen Substanzen identifiziert. Das siliziumfreie Produkt der Hydrolyse bestimmte den Grad des biologischen Abbaus. Die gute biologische Abbaubarkeit der einen siliziumorganischen Verbindung resultierte aus der leicht hydrolysierbaren Silizium-Stickstoff-Bindung und der leichten biologischen Abbaubarkeit des siliziumfreien Hydrolyseproduktes. Die siliziumhaltigen Reaktionsprodukte der Hydrolyse waren nicht biologisch abbaubar. Bioabbaudaten aus eigenen Experimenten, aus vorhergehenden in der Arbeitsgruppe durchgeführten analogen Arbeiten und aus der ECHA-Datenbank wurden zusammengetragen, um einen Datensatz zu generieren. Die 182 Substanzen des Datensatzes wurden hinsichtlich ihrer Struktur gruppiert, um allgemeine Erkenntnisse für die biologische Abbaubarkeit von siliziumorganischen Verbindungen abzuleiten. Es gab Gruppen mit Substanzen, die überhaupt nicht biologisch abbaubar waren (z. B. zyklische, lineare und verzweigte Siloxane). Gruppen, die Substanzen mit Ethern, Estern, Oximen, Aminen und Amiden enthielten, waren hydrolyseanfällig, sodass auch leicht biologisch abbaubare Zwischenprodukte gebildet werden konnten. Die siliziumfreien Hydrolyseprodukte waren meist biologisch abbaubar, während die siliziumhaltigen Hydrolyseprodukte persistent waren. Allgemein hat sich gezeigt, dass Modifikationen am Molekül einen positiven Einfluss auf die Abbaubarkeit haben können. Beispielsweise können Heteroatome eine Veränderung der Polarität bzw. der Elektronendichte hervorrufen, was die Photolyse- und Hydrolysefähigkeit und folglich auch den Bioabbau zum Positiven verändern kann. Das Einführen solcher Heteroatome oder funktioneller Gruppen in Polysiloxanketten kann demnach ein vielversprechender Ansatz für leichter abbaubare siliziumorganische Verbindungen sein. Nicht abbaubare Stoffe sollten vermieden werden, wenn sie nach ihrer Verwendung in die Umwelt gelangen.
Die Senkung der Abgasemissionen von Dieselmotoren ist ein zentraler Bestandteil der Motoren-Entwicklung. Die positive Beeinflussung kann auf verschiedene Arten erfolgen. Zum einen werden durch die Optimierung der innermotorischen Verbrennung die Abgasbestandteile gesenkt. Zum anderen kann mit Hilfe von Abgasnachbehandlungs-systemen der Ausstoß von umweltschädlichen und toxikologischen Abgasbestandteilen minimiert werden. Die Rückführung von Abgas in den Frischluft-Massenstrom (Abgasrückführung, AGR) ist eine konstruktive Maßnahme zur Reduktion von Stickstoffoxid-Emissionen bei Dieselmotoren. Bei diesen Abgasrückführungs-Systemen ist das AGR-Ventil ein zentraler Bestandteil und wird häufig mit einem Kühler kombiniert. Je nach Abgaskonzept des Motors werden Hoch- oder Niederdruck-Abgasrückführung - d.h. das Abgas wird vor oder nach dem Abgasturbolader entnommen - oder eine Kombination aus beiden System eingesetzt. In der vorliegenden Arbeit werden die Wechselwirkungen und Einflüsse von Ablagerungen in Turbo-aufgeladenen Dieselmotoren betrachtet. Der Schwerpunkt der Untersuchungen wird auf das Teilgebiet dieser Ablagerungen im Hochdruck-AGR-System gelegt, da der zu untersuchende Volkswagen Motor in Fahrzeugen zur Einhaltung der Abgasemissionsstufe Euro 5 mit einer wassergekühlten Hochdruck-AGR und einem Abgasnachbehandlungssystem ausgerüstet ist. Das Abgas der Hochdruck-AGR wird direkt vor dem Abgasturbolader entnommen und wieder der Frischluft-Ansaugstrecke zugeführt. Das entnommene Abgas wird dabei nicht durch Abgasnachbehandlungs-Systeme gereinigt, sondern alle Abgasbestandteile werden über den Kühler und über das Ventil geführt. Dabei kann es zu Verschmutzungen kommen, die potentiell die Kühlleistung, sowie die zurück geführte Abgasmasse und das Brennverfahren beinträchtigen könnten. Im Laufe der Arbeit wird die Arbeitsweise der genannten Abgasrückführung und der verschiedenen Brennverfahren im Dieselmotor eingehend beschrieben. In der vorliegenden Dissertation werden drei Aspekte der genannten Verschmutzungen bzw. Ablagerungen im AGR-System näher untersucht. Erster Aspekt: Zunächst werden die physikalischen und chemischen Ablagerungs-mechanismen aufgezeigt, die zu Verschmutzungen bzw. zu Ablagerungen in AGR-Systemen führen können. Zweiter Aspekt: Die Ablagerungen wurden hinsichtlich ihrer chemischen Zusammensetzung untersucht. Es konnte dabei festgestellt werden, dass die gefundenen Ablagerungen vollständig organisch-chemischer Natur sind und zum größten Teil aus Dieselruß, polyzyklischen aromatischen Kohlenwasserstoffen, unverbranntem Kraftstoff, sowie diversen polymeren Strukturen bestehen. Letztere werden in situ durch die vorherrschenden Temperaturen und vorliegenden Molekül-Kombinationen dargestellt. Dritter Aspekt: Die Einfluss-Faktoren und der Mechanismus der Ablagerungsbildung werden beschrieben und in Motor-Funktionsprüfstand- und in Labor-Versuchen nachgestellt. Insbesondere der Einfluss von polyzyklischen aromatischen Kohlenwasserstoffen und der Aufbau von organischen Polymeren auf Basis von Phenol-Aldehyd-Harzen, als auch Netzwerk Bildungsmechanismen mit Biodiesel-Molekülen und Veresterungs-Reaktionen haben sich als signifikante Mechanismen herausgestellt. Darüber hinaus kann ein starker Einfluss der Abgas- und Kühler-Temperaturen nachgewiesen werden. Je größer die Temperaturdifferenz zwischen Kühlwasser-Temperatur und Abgas-Temperatur ist, desto besser werden die chemischen Komponenten auf der Kühler-Oberfläche abgeschieden. Zusätzlich verstärken Abgas-Temperaturen bis zu 800 Grad C die Pyrolyse-Reaktionen und damit die Bildung von Netzwerken aus polyzyklischen aromatischen Kohlenwasserstoffen. In Verbindung mit anschließenden Abkühlphasen werden die kondensierten Abgas-Bestandteile abgekühlt und der Status einer Netzwerk-Bildungs-Reaktion ´eingefroren´. In Zusammenspiel mit Dieselruß-Partikeln wird eine Oberfläche geschaffen, die weitere Abgas-Komponenten aufzunehmen vermag. Die sich daran anschließenden Hoch-Temperatur-Phasen pyrolysieren das organische Material und erzeugen damit eine feste und festhaftende Oberfläche bzw. Isolationsschicht. Die im Abgas enthaltene Wärme kann nicht mehr über den Wärmetauscher abgeführt werden und die Pyrolyse-Reaktionen werden durch steigende Temperaturen an der Oberfläche verstärkt. Die Ablagerungsbildung katalysiert sich selbst.
Uranine (sodium fluorescein, UR) has been routinely used in hydrological research to monitor surface and subsurface water flow, transport and mixing processes since the end of nineteenth century. Based on such obtained data, further conclusions can be drawn on the spread and behavior of pollutants (partly on models). Use of UR for qualitative (visual) studies of underground contamination is common, however data available on its environmental behavior (e.g., conversion, degradation or formation and fate of the transformation products, TPs) are incomplete or not readily comparable. UR observations of biodegradation are still speculative. S-metolachlor (SM) is a popular worldwide chloroacetamide herbicide, which highly correspond to the global pesticide use. It is offered on the French market as an effective multicrop herbicide against annual grasses and certain broadleaf weeds under the trade name Mercantor Gold (MG). Photodegradation contributes to the fate of SM in the aquatic environment. TPs were already found in surface and groundwater. However, further fate and assessment of the TPs was not done. Moreover, adjuvants in MG´s formula can affect the solubility, biodegradation, photolysis and sorption properties of the active compound SM. TPs can have different properties (e.g. more mobile, toxic or present at higher concentrations) that enable them to reach the environmental compartments not affected by the parent compound (PC) itself. To assess the ecological impact of pesticides, tracers, and their respective TPs on water organisms, their behavior can be investigated in laboratory screening biodegradation tests. Yet, incomplete data was available on SM, MG and UR transformation or their photo- TPs´ fate in surface and water-sediment systems. The combination of photolysis with aerobic biodegradation in order to identify persistent photo-TPs could provide new insight into the environmental behavior of the selected compounds. Therefore, principle of this thesis was to 1) identify the impact of MG´s adjuvants on the biodegradation, photolysis (Xe lamp) and sorption compared to the SM alone, 2) examine the photolysis and biodegradability of UR 3) monitor the primary elimination (photolysis) of the PCs by HPLC (-UV, -FLD) and measure the degree of mineralization by means of nonpurgeable organic carbon (NPOC) 4) elucidate the photo-TPs of SM, MG and UR by using LCMS/ MS 5) analyze biodegradability of the photo-TPs in order to determine their fate and persistence in aquatic environment 6) conduct in silico toxicity predictions (pesticides) in human (carcinogenicity, genotoxicity and mutagenicity) and eco-toxicity (microtoxicity, bioconcentration factor and toxicity in rainbow trouts). SM, MG and UR were found not readily biodegradable in Closed Bottle test (CBT), Manometric Respiratory test (MRT) and in water-sediment test (WST). Chemical analysis of photolysis samples showed higher elimination of SM in MG compared to SM alone whereas UR displayed high primary elimination rate in general. The overall low degree of mineralization indicated that abundant photo-TPs were formed. Furthermore, the photo-TPs were found not biodegradable in performed biodegradation tests. Only small degradation rates for UR could be observed in the CBT and WST. Additionally, in the MRT and WST new bio-TPs were generated from the photo-TPs of SM and SM in MG. Obtained results suggest that the MG formulation did not significantly affect the biodegradation, however it influenced the diffusion of the active substance (SM) to sediment and potentially affected the photolysis efficiency, which might result in faster formation of photo-TPs in the environment. In silico predictions showed that for many endpoints, biotransformation might lead to an increased toxicity in humans and to water organisms compared with the parent compound SM. No indications were found for UR toxicity. Still, target-oriented investigations on long term impacts of photo-TPs from UR are warranted. The present work demonstrates that a combination of laboratory tests, analytical analysis and in silico tools result in valuable information regarding environmental fate of the TPs from selected compounds. Furthermore, it was shown that photo-TPs formed in the aquatic environment should be taken into account not only the parent compound and its decay.
After being administrated to humans or animals, pharmaceuticals may be metabolized by a variety of mechanisms and pathways within the body. Once these compounds and/or their metabolites are excreted, they may undergo degradation in the aquatic environment. Unfortunately, a rapid and complete mineralization cannot always be guaranteed, whereas relatively stable transformation products (TPs) may be formed. The largest part of older studies focused on investigation of the elimination kinetics of parent compounds without considering the amount and chemical structure of individual TPs. Only recently, there is an increasing trend to deliver such information. Nevertheless, since drugs are defined as significant environmental pollutants, it is not only important to elucidate their TPs, but also necessary to investigate whether these formed compounds preserve the same mode of action as the parent compound or are even more toxic. Thus, two main objectives of this thesis can be formulated. Firstly, to highlight the concern originated by metabolites and transformation products of pharmaceuticals that contaminate the environment. Hereby, the already-published knowledge on TPs within a certain selection of drugs is assessed to exemplify the number and quality of the existing information on their TPs. Secondly, to particularly investigate the fate of the antibiotic ciprofloxacin (CIP). This is done by (a) evaluating the suitability and sustainability of the photolytic decomposition as an advanced water treatment technique, (b) monitoring the course of genotoxicity of the irradiated mixtures using a battery of genotoxicity and cytoxicity in vitro assays, and (c) considering the potential genotoxicity for CIP´s individual TPs by the employment of in silico approaches using quantitative structure activity relationships (QSAR) models. This thesis based on the results and conclusions of five articles, which can be found in the appendix. A systematic literature review was conducted on the current state of knowledge on pharmaceuticals and its derivatives in the environment. Two groups, namely antibiotics and anticancer drugs, were considered more closely with respect to the availability of chemical structures for their TPs. Furthermore, the photodegradation of CIP as well as a preliminary toxicity assessment of its identified TPs were investigated in three research papers. An extensive review with a table at its core shows the existing data on 158 TPs, which already have an assigned registry number in chemical abstracts service (CAS-RN), was presented. In total, 294 TPs, identified with chemical structures in the literature, were found for 15 compounds out of the 21 that were selected as target compounds. Eleven TPs, created from CIP, were identified by high-performance liquid chromatography/high-resolution multiple-stage mass spectrometry. It was detected that the transformation of CIP mainly occurred through substitution of fluorine, defluorination, hydroxylation of the quinolone core and the breakdown of the piperazine ring. Some of the identified TPs of CIP were predicted as genotoxic by QSAR analysis, while the experimental testing for a few genotoxic and cytotoxic endpoints showed that the potential of the resultant mixtures could be primarily dependent on the concentration of residual CIP. In contrast, irradiation mixtures were neither mutagenic in the Ames Test nor genotoxic in the in vitro Micronucleus Test. It is possible that the effect of the TPs was masked by antagonistic mixture interactions and/or they were not formed at effectively concentrations. Nevertheless, all of the identified TPs of CIP still retained the core quinolone moiety, which is responsible for the biological activity. Thus, a more comprehensive assessment, encompassing more genotoxic endpoints, chemical analysis characterization and exposure analyses, needs to be conducted. Information available on TPs demonstrates that already slight changes in treatment conditions and processes result in the formation of different TPs. Nevertheless, most of the transformation products could neither be identified nor fully assessed regarding their toxicity. This, in turn, presents a major challenge for the identification and assessment of TPs. Hence, from a practical and sustainability point of view, limiting the input of pharmaceuticals into effluents as well as improving their (bio)degradability and elimination behavior, instead of only relying on advanced effluent treatments, is urgently needed. Solutions that focus on this