333.7 Natürliche Ressourcen, Energie und Umwelt
Refine
Keywords
- Arzneimittel (2)
- Biodegradation (2)
- Pestizid (2)
- Abgasrückführung (1)
- Abwasser (1)
- Antibiotikum (1)
- Anticancer Drug (1)
- Aquatic environment (1)
- Biodegradability (1)
- Biologische Abbaubarkeit (1)
Institute
- Institut für Nachhaltige Chemie und Umweltchemie (INUC) (9) (remove)
Among all attenuation processes, biodegradation plays one of the most important role and is one of the most desirable processes in the environment. To assess biodegradation, a variety of biodegradation test procedures have been developed by several international organizations. OECD guidelines for ready biodegradability testing represent one of the most prominent group of internationally used screening biodegradation tests (series 301A-F). These tests are usually very simple in their designs and allow for the fast and cheap screening of biodegradability. However, because of their stringency, the test conditions are not close to simulating environmental conditions and may lead to unrealistic results. To overcome these limitations, OECD introduced simulation tests which are designed to investigate the behavior of chemicals in specified environmentally relevant compartments. Despite the fact that simulation tests give more insight into the fate of chemicals in the environment, they are not applied frequently as they are often tedious, time consuming and expensive. Consequently, there is a need to provide a new biodegradation testing method that would combine complex testing environment as in simulation tests, easiness in handling and good data repeatability as in screening biodegradation tests. Another challenge is an adaption of the existing biodegradation testing methods to new types of samples, i.e. mixtures of transformation products (TPs). The research on the presence of pharmaceuticals in the environment gained momentum in the 1990s; since then, it has been growing. Their presence in the environment is a wellestablished fact. A wide range of pharmaceuticals is continuously detected in many environmental compartments such as surface waters, soils, sediments, or ground waters. After pharmaceuticals reach the natural aquatic environment they may undergo a number of processes such as: photolysis (under direct sunlight), hydrolysis, oxidation and reduction reactions, sorption, biodegradation (by bacteria of fungi), and bioaccumulation. These processes, may cause their elimination from aquatic environment, if reaction is complete, or creation of new compounds i.e., transformation products (TPs). What is more, processes, like chlorination and advanced oxidation processes (AOPs), such as H2O2/UV, O3/UV, TiO2/UV, Fenton, and photo-Fenton, or UV treatment which might be applied in water or wastewater treatment, may also lead to the TPs introduction into aquatic environment. The research on the TPs brings many new challenges. From one side, there is a constant need for the the development of a sensitive and reliable analytical separation, detection, and structure elucidation methods. Additionally, there is a need for the preparation of appropriate assays for the investigation of properties of new compounds, especially those answering the question if TPs pose a higher risk to the aquatic ecosystems than their parent compounds. Among numerous groups of pharmaceuticals, two are of great importance: antibiotics since they might promote emergence and maintenance of antimicrobial resistance in the aquatic environment; and cytostatic drugs. Cytostatic drugs can exert carcinogenic, mutagenic and/or teratogenic effects in animals and humans. The challenges of biodegradation testing presented in this thesis, encompasses these different areas of interest and was divided into three objectives: 1) Identification of the knowledge gaps and data distribution of the two groups of pharmaceuticals antibiotics and cytostatic drugs (article I); 2) Increasing the knowledge on biodegradation of cytostatic drugs and their TPs (articles II, III, and IV) and 3) Establishment of a biodegradation test with closer to simulation tests conditions, that could be affordable and to support better understanding on processes in water sediment interface construction - screening water-sediment test. Further validation of the test with an insight into sorption and desorption processes (articles V and VI).
Heating is most important part of thermal energy demand, and accounts for large amounts ofenergy consumption in cold regions. Renewable energy sources will be of great importance inorder to cover future energy demands. However, their intermittency is rightly considered asinconvenient. Thus, a more effective management of demand, coupled with efficient storagesystems is required. Based on this perception, thermal systems coupled with electricityproduction have been efficiently designed, they are the so called “combined heat and power”(micro-CHP). Nonetheless, heat losses from the thermal part of their system lead to electricityfluctuation. Therefore, the use of micro-CHP in combination with a volume-efficient and nearlylossless heat storage system to counteract electricity fluctuations is a viable solution.The heat storage system in this work is based on reversible thermochemical reactions, suchas dehydration and hydration of inorganic salts, which exhibits very high energy density (up to628 kWh·m-3 of storage material). The chosen inorganic salt (SrBr2·6H2O) reacting with purewater vapour operates within a closed system. The objective of this work is to design a systemthat thermodynamically matches the combination with micro-CHP. Therefore, investigationshave been performed from the material at micro-scale to the system at lab-scale. Models weredeveloped on the basis of heat and mass transfer with chemical reaction and were done in orderto numerically analyse the system. Experiments were additionally performed to consolidate thenumerical tools for future studies. Characterization experiments have been designed and tested.Thermo-physical properties (thermal conductivity, specific heat capacity, permeability, chemicalkinetics) of the reactive salt were then determined to be used as parameters into the sodeveloped models.The numerical simulations lead to the time-space evolution of heating fluid, reactive bedtemperatures and reactor pressure. The originality of this study is to model the coupled heat andmass transfer with chemical reaction on a 3D geometry to be close to the reality. Results help tonumerically and experimentally analyse the thermochemical heat storage performances. Thebed energy density is experimentally found to be 531 kWh·m-3 of salt hydrate. Based on thecondensation temperature during the experimentation, a reactor energy density of 140 kWh·m-3and a storage capacity of 65 kWh with a thermal efficiency of 0.78 are obtained. This systemproves the recovery capacity of more than 2/3 of the input energy. Various aspects of design andrecommendation for optimisation aspect that could help during prototype development aretaken into account and addressed. Comparison simulation-experiment is then performed anddiscussed, showing encouraging results, even if limited at lab-scale.
Die Senkung der Abgasemissionen von Dieselmotoren ist ein zentraler Bestandteil der Motoren-Entwicklung. Die positive Beeinflussung kann auf verschiedene Arten erfolgen. Zum einen werden durch die Optimierung der innermotorischen Verbrennung die Abgasbestandteile gesenkt. Zum anderen kann mit Hilfe von Abgasnachbehandlungs-systemen der Ausstoß von umweltschädlichen und toxikologischen Abgasbestandteilen minimiert werden. Die Rückführung von Abgas in den Frischluft-Massenstrom (Abgasrückführung, AGR) ist eine konstruktive Maßnahme zur Reduktion von Stickstoffoxid-Emissionen bei Dieselmotoren. Bei diesen Abgasrückführungs-Systemen ist das AGR-Ventil ein zentraler Bestandteil und wird häufig mit einem Kühler kombiniert. Je nach Abgaskonzept des Motors werden Hoch- oder Niederdruck-Abgasrückführung - d.h. das Abgas wird vor oder nach dem Abgasturbolader entnommen - oder eine Kombination aus beiden System eingesetzt. In der vorliegenden Arbeit werden die Wechselwirkungen und Einflüsse von Ablagerungen in Turbo-aufgeladenen Dieselmotoren betrachtet. Der Schwerpunkt der Untersuchungen wird auf das Teilgebiet dieser Ablagerungen im Hochdruck-AGR-System gelegt, da der zu untersuchende Volkswagen Motor in Fahrzeugen zur Einhaltung der Abgasemissionsstufe Euro 5 mit einer wassergekühlten Hochdruck-AGR und einem Abgasnachbehandlungssystem ausgerüstet ist. Das Abgas der Hochdruck-AGR wird direkt vor dem Abgasturbolader entnommen und wieder der Frischluft-Ansaugstrecke zugeführt. Das entnommene Abgas wird dabei nicht durch Abgasnachbehandlungs-Systeme gereinigt, sondern alle Abgasbestandteile werden über den Kühler und über das Ventil geführt. Dabei kann es zu Verschmutzungen kommen, die potentiell die Kühlleistung, sowie die zurück geführte Abgasmasse und das Brennverfahren beinträchtigen könnten. Im Laufe der Arbeit wird die Arbeitsweise der genannten Abgasrückführung und der verschiedenen Brennverfahren im Dieselmotor eingehend beschrieben. In der vorliegenden Dissertation werden drei Aspekte der genannten Verschmutzungen bzw. Ablagerungen im AGR-System näher untersucht. Erster Aspekt: Zunächst werden die physikalischen und chemischen Ablagerungs-mechanismen aufgezeigt, die zu Verschmutzungen bzw. zu Ablagerungen in AGR-Systemen führen können. Zweiter Aspekt: Die Ablagerungen wurden hinsichtlich ihrer chemischen Zusammensetzung untersucht. Es konnte dabei festgestellt werden, dass die gefundenen Ablagerungen vollständig organisch-chemischer Natur sind und zum größten Teil aus Dieselruß, polyzyklischen aromatischen Kohlenwasserstoffen, unverbranntem Kraftstoff, sowie diversen polymeren Strukturen bestehen. Letztere werden in situ durch die vorherrschenden Temperaturen und vorliegenden Molekül-Kombinationen dargestellt. Dritter Aspekt: Die Einfluss-Faktoren und der Mechanismus der Ablagerungsbildung werden beschrieben und in Motor-Funktionsprüfstand- und in Labor-Versuchen nachgestellt. Insbesondere der Einfluss von polyzyklischen aromatischen Kohlenwasserstoffen und der Aufbau von organischen Polymeren auf Basis von Phenol-Aldehyd-Harzen, als auch Netzwerk Bildungsmechanismen mit Biodiesel-Molekülen und Veresterungs-Reaktionen haben sich als signifikante Mechanismen herausgestellt. Darüber hinaus kann ein starker Einfluss der Abgas- und Kühler-Temperaturen nachgewiesen werden. Je größer die Temperaturdifferenz zwischen Kühlwasser-Temperatur und Abgas-Temperatur ist, desto besser werden die chemischen Komponenten auf der Kühler-Oberfläche abgeschieden. Zusätzlich verstärken Abgas-Temperaturen bis zu 800 Grad C die Pyrolyse-Reaktionen und damit die Bildung von Netzwerken aus polyzyklischen aromatischen Kohlenwasserstoffen. In Verbindung mit anschließenden Abkühlphasen werden die kondensierten Abgas-Bestandteile abgekühlt und der Status einer Netzwerk-Bildungs-Reaktion ´eingefroren´. In Zusammenspiel mit Dieselruß-Partikeln wird eine Oberfläche geschaffen, die weitere Abgas-Komponenten aufzunehmen vermag. Die sich daran anschließenden Hoch-Temperatur-Phasen pyrolysieren das organische Material und erzeugen damit eine feste und festhaftende Oberfläche bzw. Isolationsschicht. Die im Abgas enthaltene Wärme kann nicht mehr über den Wärmetauscher abgeführt werden und die Pyrolyse-Reaktionen werden durch steigende Temperaturen an der Oberfläche verstärkt. Die Ablagerungsbildung katalysiert sich selbst.
Uranine (sodium fluorescein, UR) has been routinely used in hydrological research to monitor surface and subsurface water flow, transport and mixing processes since the end of nineteenth century. Based on such obtained data, further conclusions can be drawn on the spread and behavior of pollutants (partly on models). Use of UR for qualitative (visual) studies of underground contamination is common, however data available on its environmental behavior (e.g., conversion, degradation or formation and fate of the transformation products, TPs) are incomplete or not readily comparable. UR observations of biodegradation are still speculative. S-metolachlor (SM) is a popular worldwide chloroacetamide herbicide, which highly correspond to the global pesticide use. It is offered on the French market as an effective multicrop herbicide against annual grasses and certain broadleaf weeds under the trade name Mercantor Gold (MG). Photodegradation contributes to the fate of SM in the aquatic environment. TPs were already found in surface and groundwater. However, further fate and assessment of the TPs was not done. Moreover, adjuvants in MG´s formula can affect the solubility, biodegradation, photolysis and sorption properties of the active compound SM. TPs can have different properties (e.g. more mobile, toxic or present at higher concentrations) that enable them to reach the environmental compartments not affected by the parent compound (PC) itself. To assess the ecological impact of pesticides, tracers, and their respective TPs on water organisms, their behavior can be investigated in laboratory screening biodegradation tests. Yet, incomplete data was available on SM, MG and UR transformation or their photo- TPs´ fate in surface and water-sediment systems. The combination of photolysis with aerobic biodegradation in order to identify persistent photo-TPs could provide new insight into the environmental behavior of the selected compounds. Therefore, principle of this thesis was to 1) identify the impact of MG´s adjuvants on the biodegradation, photolysis (Xe lamp) and sorption compared to the SM alone, 2) examine the photolysis and biodegradability of UR 3) monitor the primary elimination (photolysis) of the PCs by HPLC (-UV, -FLD) and measure the degree of mineralization by means of nonpurgeable organic carbon (NPOC) 4) elucidate the photo-TPs of SM, MG and UR by using LCMS/ MS 5) analyze biodegradability of the photo-TPs in order to determine their fate and persistence in aquatic environment 6) conduct in silico toxicity predictions (pesticides) in human (carcinogenicity, genotoxicity and mutagenicity) and eco-toxicity (microtoxicity, bioconcentration factor and toxicity in rainbow trouts). SM, MG and UR were found not readily biodegradable in Closed Bottle test (CBT), Manometric Respiratory test (MRT) and in water-sediment test (WST). Chemical analysis of photolysis samples showed higher elimination of SM in MG compared to SM alone whereas UR displayed high primary elimination rate in general. The overall low degree of mineralization indicated that abundant photo-TPs were formed. Furthermore, the photo-TPs were found not biodegradable in performed biodegradation tests. Only small degradation rates for UR could be observed in the CBT and WST. Additionally, in the MRT and WST new bio-TPs were generated from the photo-TPs of SM and SM in MG. Obtained results suggest that the MG formulation did not significantly affect the biodegradation, however it influenced the diffusion of the active substance (SM) to sediment and potentially affected the photolysis efficiency, which might result in faster formation of photo-TPs in the environment. In silico predictions showed that for many endpoints, biotransformation might lead to an increased toxicity in humans and to water organisms compared with the parent compound SM. No indications were found for UR toxicity. Still, target-oriented investigations on long term impacts of photo-TPs from UR are warranted. The present work demonstrates that a combination of laboratory tests, analytical analysis and in silico tools result in valuable information regarding environmental fate of the TPs from selected compounds. Furthermore, it was shown that photo-TPs formed in the aquatic environment should be taken into account not only the parent compound and its decay.
In der Umweltanalytik steht die Analyse von potenziellen Schadstoffen im Vordergrund. Häufig ist die negative Wirkungsweise dieser Schadstoffe auf Organismen und Umweltkompartimente bekannt. Dennoch kommt es vor, dass Organismen in einem Ökosystem geschädigt werden, ohne dass dies auf eine bekannte Ursache zurückgeführt werden kann. Der Ansatz der wirkungsspezifischen Analyse greift an diesem Punkt an, da er mit Hilfe von chemisch-analytischen Verfahren die Identifizierung von Schadstoffen mit der Erkenntnis über deren potenzielle Wirkungen auf Organismen mittels Biotests kombiniert. SCHUETZLE UND LEWTAS (1986) stellten fest, dass die Nutzung von Biotests in Verbindung mit analytischen Messungen einen leistungsfähigen Ansatz zur Identifizierung von Umweltschadstoffen darstellt. Sie prägten den Begriff 'Bioassay-Directed Chemical Analysis' (BDCA). Dieses Konzept der 'Biotest-geleiteten chemischen Analyse', oder auch 'Wirkungsspezifische Analyse' genannt, dient folglich der Identifizierung von toxischen Verbindungen in Umweltproben. Es ist verwandt mit dem dreistufigen Konzept 'Toxicity Identification and Evaluation' (TIE) (Toxizität, Identifizierung und Beurteilung), das Ende der 80er Jahre von der amerikanischen Umweltbehörde US-EPA eingeführt wurde.
Verbräuche von Arzneistoffen, die auf das menschliche Nervensystem wirken (Neurologika), unterliegen aufgrund der auf dem Markt befindlichen Arzneistoffvielfalt einem ständigen Wandel. Zudem waren die Haupteintragspfade für Neurologika in die aquatische Umwelt bisher nicht eindeutig geklärt. Haushalte (diffuser Eintrag) und Einrichtungen des Gesundheitswesens (punktueller Eintrag), wie psychiatrische Fachkliniken oder Pflegeheime, wurden als maßgebliche Eintragspfade diskutiert. Ziel dieser Arbeit war es deshalb, Arzneimittelverbräuche und damit verbundene Arzneistoffemissionen durch Haushalte und Einrichtungen des Gesundheitswesens mit Hilfe einer neu entwickelten Methode abzuschätzen. Bei dieser Methode wurde das jeweilige Ausmaß der Emissionen durch die Kalkulation von Abwasserkonzentrationen und den Vergleich von Verbrauchsmengen an Arzneistoffen bestimmt. Im Ergebnis konnte gezeigt werden, dass sich Arzneimittelverbrauchsmuster in psychiatrischen Fachkliniken und Pflegeheimen von denen in allgemeinen Krankenhäusern und Haushalten unterscheiden. Außerdem konnte mit dieser Methode deren jeweiliger Beitrag am gesamten Arzneistoffeintrag in das kommunale Abwasser eingeschätzt und in hohen Mengen in das Abwasser eingetragene Arzneistoffe identifiziert werden. Durch Haushalte wurde das hinsichtlich des Umweltverbleibs und -verhaltens wenig untersuchte Antiepileptikum Gabapentin in hohen Mengen in das Abwasser eingetragen. Die Bedeutung von Einrichtungen des Gesundheitswesens am Arzneimitteleintrag in das kommunale Abwasser konnte für alle untersuchten Einrichtungstypen im Vergleich zu Haushalten als gering eingestuft werden. Bestimmte einrichtungstypische Arzneistoffe, insbesondere Neurologika, können bei regionaler Betrachtung jedoch eine größere Rolle spielen. Insbesondere Quetiapin wurde in psychiatrischen Fachkliniken und Pflegeheimen als Substanz mit hohen Verbrauchsmengen und hohem Emissionspotential identifiziert. Ausgehend von diesen Erkenntnissen wurden Gabapentin und Quetiapin tiefergehend hinsichtlich ihres Verbleibs und ihres Verhaltens in der aquatischen Umwelt charakterisiert. Beide Arzneistoffe wurden bei verschiedenen Startkonzentrationen zur Simulation eines technischen Behandlungsverfahrens mit UV-Licht bestrahlt. Im weiteren Verlauf wurden Gabapentin und Quetiapin und die jeweilige Muttersubstanz im Gemisch mit gebildeten Phototransformationsprodukten hinsichtlich biologischer Abbaubarkeit im Closed Bottle Test und im Manometrischen Respirationstest nach OECD-Richtlinien und hinsichtlich toxischer Eigenschaften im Leuchtbakterientest und im Umu-Test beurteilt. Die Strukturaufklärung von Photo- und Biotransformationsprodukten erfolgte mittels hochauflösender Massenspektrometrie. Im Ergebnis konnten weder Gabapentin noch Quetiapin bei hohen Startkonzentrationen durch Photolyse über 128 min mineralisiert oder vollständig eliminiert werden. Identische Phototransformationsprodukte wurden bei unterschiedlichen Startkonzentrationen für die UVBehandlung gebildet. Die Arzneistoffe Gabapentin und Quetiapin waren nach OECD-Richtlinien im Closed Bottle Test nicht leicht biologisch abbaubar. Die photolytischen Gemische von Gabapentin sind nicht besser als Gabapentin selbst abbaubar und die Phototransformationsprodukte wurden im Closed Bottle Test ebenfalls nicht eliminiert. Auch das photolytische Gemisch von Quetiapin im Closed Bottle Test war nicht besser biologisch abbaubar als Quetiapin selbst. Die Phototransformationsprodukte von Quetiapin und Quetiapin selbst unterlagen beim Closed Bottle Test und im Manometrischen Respirationstest verschiedenen biologischen Transformationsprozessen und führten zur Bildung von verschiedenen Biotransformationprodukten. Das in biologischen Abbautests von Quetiapin maßgeblich gebildete Biotransformationprodukt BTP 398 konnte in diversen Flusswasserproben nachgewiesen werden. Dies lässt sich höchstwahrscheinlich damit erklären, dass BTP 398 unter anderem auch beim humanen Metabolismus gebildet wird. Die Langzeit-Leuchthemmung und die Zellvermehrungshemmung im Leuchtbakterientest stiegen im Verlauf der Photolyse von Gabapentin durch Bildung von Phototransformationsprodukten. Dies deutet auf eine erhöhte Toxizität der Phototransformationsprodukte im Vergleich zu Gabapentin hin. Bei Quetiapin war unter Photolyse keine Abnahme der schon vorhandenen Toxizität beim Leuchtbakterientest zu erkennen. Gabapentin, Quetiapin und deren Phototransformationsprodukte wiesen im Umu-Test keine Genotoxizität auf. …
In the discourse on pharmaceuticals in the environment, hardly any attention has been paid to anticancer drugs. Because of their none-selective modes of action, that is, because they affect both cancerous and healthy cells, these drugs are regarded as potentially carcinogenic, genotoxic, mutagenic, and teratogenic substances. It is, however, not known how and to what extent these substances affect organisms and the environment in the long run. For this reason, this dissertation evaluated, addressing several endpoints and using organisms from different trophic levels and in silico predictions, the fate (bio- and photo degradation) and ecotoxicity of these substances. Four anticancer drugs (cyclophosphamide (CP), 5-fluorouracil (5-FU), methotrexate (MTX), and imatinib (IM) were selected. None of these anticancer compounds can be classified as ´readily biodegradable,´ a classification that indicates that biodegradation will only play a minor role in the elimination of these compounds and that they cannot be removed by the conventional processes used in sewage treatment plants and will most likely remain in the water cycle. Despite the high degrees of mineralization achieved in advanced (photo)oxidation processes, it was not possible to fully mineralize the compounds, a result that indicates that transformation products were created during these reactions. The ecotoxicity assays performed with V. fischeri indicated that 5-FU was, of all the substances tested, likely to be the most toxic (very toxic), followed by MTX (toxic) and IM (toxic/harmful), whereas CP was nontoxic. MTX presented the highest phytoxicity activity in the Lactuca sativa assay, followed by 5-FU, IM, and CP. The results of the tests performed with A. cepa showed cytotoxic (5-FU, MTX, and CP) and genotoxic effects (5-FU, CP, and IM) and mutagenic activity (5-FU, MTX, CP, and IM) of the compounds. Photo transformation products (PTPs) of CP, MTX, and 5-FU were nontoxic towards V. fischeri. However, some PTPs formed during the photodegradation of 5-FU led to positive mutagenic and genotoxic alerts in several in silico models. Not one of the compounds examined in this dissertation is likely to be fully eliminated from the water cycle by (natural) photolysis and/or advanced oxidation. Moreover, some of the treatments resulted in the formation of stable intermediates that were even less biodegradable than parent compounds. This finding shows that it is not enough to focus on primary elimination because TPs are not necessarily better biodegradable than their respective parent compounds. As indicated by the genotoxic and mutagenic positive alerts presented by different in silico models, the PTPs observed here are likely to require, despite their lower toxicity in comparison to the parent compounds, screening after treatments.
In der vorliegenden Arbeit werden Untersuchungsergebnisse von niedersächsischen Gewässern auf Triphenylzinn (TPT) präsentiert. Betrachtet werden die Matrices Wasser, Schwebstoff, Sediment und aquatische Organismen, wie Makrozoobenthos und Fische, um eine möglichst umfassende Aussage hinsichtlich des Akkumulationsverhaltens von TPT zu erhalten. Da TPT ein ähnlich endokrin wirksames Potential wie Tributylzinn (TBT) aufweist, über TBT aber wesentlich mehr Informationen und Erkenntnisse als über TPT vorliegen, sind zudem vergleichende Betrachtungen zwischen diesen beiden Organozinnspezies angestellt worden. Die wichtigsten Aussagen dieser Arbeit sind, dass sich TPT in den Kompartimenten Wasser, Schwebstoff und Sediment unauffällig verhält, es jedoch über ein sehr hohes Bioakkumulationsverhalten verfügt. Aus diesen Ergebnissen ist zu fordern, dass Gewässerüberwachungsprogramme unbedingt um die Stufe eines Biomonitorings, in dem aquatische Organismen als Endglieder der Nahrungskette auf Schadstoffe untersucht werden, zu erweitern sind.
Durch die fortschreitende Intensivierung der landwirtschaftlich genutzten Flächen in Deutschland wird im Rahmen der Ertragsteigerung oftmals ein erhöhter Einsatz von Düngemitteln und Pestiziden beobachtet. Da bislang nur wenige Abstandsauflagen zu Saumbiotopen bei der Zulassung von Substanzen festlegt wurden und darüber hinaus durch Abdrift, vor allem in Hauptwindrichtung von Agrarflächen, eine ungewollte Applikation ausgebrachter Fungizide auf Waldsäume (hier: Nichtzielfläche) anzunehmen ist, kann eine Gefährdung von Nichtzielorganismen nicht ausgeschlossen werden. Durch einen zulässigen Einsatz von Fungiziden im Forst und in Baumschulen werden Bestände auch unmittelbar mit Pestiziden exponiert. Im Rahmen dieser Arbeit wurde die Symbiose zwischen Bäumen als Nichtzielpflanzen und Ektomykorrhiza-Pilzen (ECM) als Nichtzielorganismen unter Fungizid- und Herbizid-Exposition untersucht. Als Modellsubstanzen wurden sowohl Pestizide mit einer Zulassung für Forstwirtschaft und Baumschulen wie auch mit Ackerbauzulassung gewählt. Die Anwendungsbereiche werden durch Konzentrationsniveaus (100% bzw. 10% der empfohlen Aufwandmenge, AM) abgebildet. Buchen, welche eine intakte Symbiose mit Ektomykorrhiza aufweisen, sind besser an ihre Umwelt angepasst und verfügen über Standortvorteile aufgrund einer effektiveren Nährstoff- und Wasseraufnahme. Diese Symbiose reagiert sensibel auf anthropogene Störungen wie Pestizidanwendungen. Die Substanzen können dabei sowohl über eine direkte Wirkung auf die Mykorrhiza-Pilze, wie auch über eine indirekt schädigende Wirkung auf die Wirtspflanze, die Symbiose beeinflussen. Ziel der Arbeit war es zu untersuchen, ob und welche Auswirkungen auf den Endpunkt Myzelwachstum von Ektomykorrhiza Pilzen durch eine Exposition zu beobachten sind. Zur Gefährdungsabschätzung wurden gemessene Pestizidkonzentrationen (MEC) in Gewächshausversuchen bestimmt; ECx Werte aus Konzentrations-Wirkungskurven ermittelt und die daraus resultierenden ökotoxikologischen Kenngrößen QR (Quotient Ratio) und TER (Toxic Exposure Ratio) berechnet. Dazu wurden zunächst in vitro Hemmversuche unter definierten Laborbedingungen durchgeführt. Als Endpunkt wurde das Myzelwachstum von Ektomykorrhiza-Pilzen definiert und entsprechende Kenngrößen wie EC10, EC50 und EC90 Werte für verschiedene Pestizid- ECM Modelle ermittelt. Als Modellorganismen wurden Pisolithus arhizus, Hebeloma crustuliniforme, Lyophyllum sp. und Cenococcum geophilum eingesetzt. Als Pestizide wurden die Wirkstoffe Quinoxyfen, Boscalid, Tebuconazol, Azoxystrobin sowie die Formulierungen Orius, Collis und Basta untersucht. Ergänzend dazu wurden Expositionsversuche im Gewächshaus durchgeführt und die Konzentrationen und Verteilungen der Wirkstoffe Tebuconazol und Boscalid in den Kompartimenten Boden1, Wurzelnaher Boden2 und Wurzel bestimmt. Hierzu wurde eine Methode zur Aufbereitung, Extraktion und Analyse mittels LC- MSMS in den verschiedenen Kompartimenten entwickelt. Ebenfalls wurde eine Methode zur Messung der Substanz Tebuconazol im Myzel von Pisolithus arhizus entwickelt. Aufgrund der Ergebnisse konnte gezeigt werden, dass die Toleranz der Mykobionten auf eine Exposition von dem untersuchten Testorganismus und dem eingesetzten Wirkstoff sowie dessen Konzentration abhängt. Hierbei wurde für den sensibelsten Testorganismus im Versuch, Pisolithus arhizus, ein EC50 Wert kleiner 0,026 ng g-1 für eine Exposition mit Orius ermittelt. Für eine Exposition von Pisolithus arhizus mit dem Herbizid Basta wurde ein EC50 Wert von 0,4% AM entsprechend 6 g ha -1 Glufosinat berechnet. in dem für die Symbiose relevanten Kompartiment Wurzelnaher Boden Wirkstoffkonzentrationen im Bereich von 100 - 500 ng g-1 für Boscalid und 150 - 700 ng g-1 für Tebuconazol bestimmbar sind. in dem Kompartiment Wurzel sowohl der Wirkstoff Tebuconazol wie auch Boscalid nachgewiesen werden konnte. im exponierten Myzel von Pisolithus arhizus der Wirkstoff Tebuconazol nachgewiesen werden konnte. Es wird somit von einer Bioverfügbarkeit der Substanz Tebuconazol ausgegangen. aufgrund der Datenlage und einer Berücksichtigung eines TER-Wertes < 5, für nahezu alle Kombinationen ein erhöhtes ökotoxikologisches Risiko anzunehmen ist. Einzig für eine Exposition mit 10% AM Boscalid auf den Testorganismus Cenococcum geophilum konnte ein TER > 9 ermittelt werden. Somit erscheinen weitere Untersuchungen bezüglich der Auswirkung von Pestiziden auf die Nichtzielorganismengruppe Ektomykorrhiza sinnvoll und notwendig. Für die Bewertung muss ein geeignetes Testsystem für Bodenmikroorganismen wie Mykorrhiza-Pilze standardisiert und validiert werden. Die entwickelte und angewendete Plattenmethode als Standardmesssystem erscheint dafür geeignet. Im Rahmen der Pestizidzulassungen müssen in Zukunft möglicherweise Mykorrhiza-Symbiosen bedacht werden und Schutzmaßnahmen wie Anwendungsbeschränkungen oder Abstandsregelungen zu Saumbiotopen überdacht werden.