540 Chemie und zugeordnete Wissenschaften
Filtern
Erscheinungsjahr
Dokumenttyp
- Dissertation (15)
- Bachelorarbeit (1)
Sprache
- Englisch (16) (entfernen)
Schlagworte
- Abwasseranalyse (2)
- Arzneimittel (2)
- Pharmaceuticals (2)
- Abbau (1)
- Abwassermarkierungsstoffe (1)
- Arctic Atmosphere (1)
- Arktis (1)
- Atmosphäre (1)
- Coastel environment (1)
- Data Mining (1)
Thermal energy storage systems have a high potential for a sustainable energy management. Low temperature thermochemical energy stores based on gas-solid reactions represent appealing alternative options to sensible and latent storage technologies, in particular for heating and cooling purposes. They convert heat energy provided from renewable energy and waste heat sources into chemical energy and can effectively contribute to load balancing and CO2 mitigation. At present, several obstacles are associated with the implementation in full-scale reactors. Notably, the mass and heat transfer must be optimized. Limitations in the heat transport and diffusions resistances are mainly related to physical stability issues, adsorption/desorption hysteresis and volume expansion and can impact the reversibility of gas-solid reactions. The aim of this thesis was to examine the energy storage and cooling efficiency of CaCl2, MgCl2, and their physical salt mixtures as adsorbents paired with water, ethanol and methanol as adsorbates for utilization in a closed, low level energy store. Two-component composite adsorbents were engineered using a representative set of different host matrices (activated carbon, binderless zeolite NaX, expanded natural graphite, expanded vermiculite, natural clinoptiolite, and silica gel). The energetic characteristics and sorption behavior of the parent salts and modified thermochemical materials were analyzed employing TGA/DSC, TG-MS, Raman spectroscopy, and XRD. Successive discharging/charging cycles were conducted to determine the cycle stability of the storage materials. The overall performance was strongly dependent on the material combination. Increase in the partial pressure of the adsorbate accelerated the overall adsorbate uptake. From energetic perspectives the CaCl2-H2O system exhibited higher energy storage densities than the CaCl2 and MgCl2 alcoholates studied. The latter were prone to irreversible decomposition. Ethyl chloride formation was observed for MgCl2 at room and elevated temperatures. TG-MS measurements confirmed the evolution of alkyl chloride from MgCl2 ethanolates and methanolates upon heating. However, CaCl2 and its ethanolates and methanolates proved reversible and cyclable in the temperature range between 25°C and 500°C. All composite adsorbents achieved intermediate energy storage densities between the salt and the matrix. The use of carbonaceous matrices had a heat and mass transfer promoting effect on the reaction system CaCl2-H2O. Expanded graphite affected only moderately the adsorption/desorption of methanol onto CaCl2. CaCl2 dispersed inside zeolite 13X showed excellent adsorption kinetics towards ethanol. However, main drawback of the molecular sieve used as supporting structure was the apparent high charging temperature. Despite variations in the reactivity over thermal cycling caused by structural deterioration, composite adsorbents based on CaCl2 have a good potential as thermochemical energy storage materials for heating and cooling applications. Further research is required so that the storage media tested can meet all necessary technical requirements.
To improve the properties of thermochemical heat storage materials, salt mixtures were evaluated for their heat storage capacity and cycle stability as part of the innovation incubator project "Thermochemical battery" of the Leuphana university Lüneburg. Based on naturally occurring compound minerals, 16 sulfates, 18 chlorides and 5 chloride multi-mixtures, 18 bromides and 5 intermixtures between sulfates, chlorides and bromides were synthesized either from liquid solution or by dry mixing for TGA/DSC screening before continuing the heat storage evaluation with five different measurement setups at a laboratory scale. The TGA/DSC analysis served as a screening process to reduce the number of testing materials for the upscaled experiments. The evaluation process consisted of a three-cycle dehydration/hydration measurement at Tmax=100°C and Tmax=200°C. In case of the bromide samples a measurement of hydration conditions with Tmax=110°C and a water flow at e=18.68mbar, were added to the procedure to detect the maximum water uptake temperature. Also, a single dehydration to a temperature of Tmax=500°C was implemented to observe melting behavior and to easier calculate the samples’ stages of hydration from the remaining anhydrous mass. Materials which showed high energy storage density and improved cycle stability during this first evaluation were cleared for multi-cycle measurements of 10 to 25 dehydration and hydration cycles at Tmax = 100 to 120°C and the evaluations at m=20 to 100g scale. An estimate for the specific heat capacities at different temperatures of the materials which passed the initial stage was calculated from the TGA/DSC results as well. The laboratory scale measurement setup went through five stages of refining, which led to reducing the intended maximum sample mass from m=100g to m=20g. A switch from supplied liquid water to water vapor as the used reactant was also implemented in exchange for improved dehydration conditions. Introducing a vacuum pump for evaporating the water limited the influence of outside heat sources during hydration and in-situ dehydration was enabled as to not disturb the state the samples were settling in between measurements. Baseline calculation from blanc measurements with glass powder and attempts to calculate the specific heat capacity cp of the tested materials by 6 applying the Joule-Lenz-law to the measurement apparatus was another step of method development. The evaluation process of the laboratory scale tests at the final setting consisted of 1 to 5 cycle measurements of in-situ dehydration and hydrations with applied vacuum for t=30 minutes at p~30mbar. Upscaling the sample mass to m=20g allowed for a close observation of different material behaviors. Agglomeration, melting and dissolving of the m=10mg samples during the TGA/DSC analysis can be deducted from the recorded measurement curves and the state of the sample after measurement. However, at laboratory scale the visible volume changes, observed sample consistency after agglomeration and an automatic removal of molten and dissolved sample mass during the measurement allowed for a better characterization and understanding of the magnitude of the actual changes. This was done for the first time, particularly for mixed salts. Of the original number of 62 samples, 4 mixtures which passed the initial TGA/DSC screening namely {2MgCl2+ KCl}, {2MgCl2+CaCl2}, {5SrBr2+8CaCl2} and {2ZnCl2 + CaCl2} were chosen for further evaluation. The multi-cycle TGA/DSC measurements of {2MgCl2+ KCl}, {2MgCl2+CaCl2} and {5SrBr2+8CaCl2} showed an improved cycle stability for all three materials over the untreated educts. Of the four materials {2ZnCl2 + CaCl2} displayed the strongest deliquescence during hydration in the upscaled experimental setup. {2MgCl2+CaCl2} proved to be the most stable material regarding the heat storage density. The {MgCl2} content of the mixture is likely to partially or completely react to {Mg(OH)Cl} at temperatures of T>110°C, which however does not impede the heat storage density. {5SrBr2+8CaCl2} displayed a low melting point in hydrated state, causing a fast material loss. This makes it an undesirable storage material. A lower heating rate may still help to avoid an early melting. The {2MgCl2+KCl} mixture was the most temperature stable of the mixtures showing no melting or dissolving behavior. A reaction of the {MgCl2} component of the mixture to {Mg(OH)Cl} was not observed within the applied temperature range of T=25 to 200°C.
Poor quality of freshwaters is a widespread problem. The concept of complexity is a particularly promising concept to analyse and address this problem, and public policy problems more generally. The main reason is the concept's strength in unifying structural features of problems within a more comprehensive structural approach to political problem-solving. So far, however, these possible benefits remained hidden given the lack of a clear understanding of complexity, ultimately hampering a systematic analysis of the implications of complexity for solutions and governance strategies. This study aims at strengthening the value of the concept of complexity for systematic comparative analyses of water-related problems and public policies in general. To achieve this goal, this work is to specify the concept of complexity as well as the implications of complexity for solutions and governance strategies, both from a theoretical and an empirical point of view. To this end, five main basic approaches are applied, referring to underlying premises, the role of an interdisciplinary approach, the European Water Framework as an empirical reference point, the integration of practical knowledge, and the focus on external validity. This dissertation provides a detailed operationalisation of complexity related to the dimensions of goals, variables, dynamics, interconnections, and informational uncertainty. It also shows that freshwater pollution-related problems in Germany differ along these five complexity dimensions. This applies to 37 types of pollution-related problems and four clusters of problems, which refer here to tame, wicked, system complexity, and uncertainty problems. This dissertation suggests that relations between complexity and policy delivery can be both positive and negative and vary along dimensions of complexity and policy delivery. Regarding the analysed freshwater pollution problems, this work also shows various effects of complexity on policy delivery, both along the 37 types of problems, and along four clusters of wicked problems. This dissertation suggests a differentiated theoretical approach to define governance for complex problem-solving, demonstrating that the role of diverse institutions, actors, and interactions differs for solutions along five key dimensions of complexity and different management strategies that are information gathering, modelling, using decision-support tools, prioritising of measures, conflict solving, deciding under uncertainty, and being adaptive and flexible.
Organophosphorus flame retardants and plasticizers (OPEs) have been utilized for decades as plasticizers and, to a lesser extent, as flame retardants in various consumer products to improve their material properties. The research presented in this thesis investigated the occurrence, distribution and transport of OPEs with a focus on the coastal and estuarine environment. Due to the wide range of physicochemical properties of OPEs, the environmental fate and behaviour of OPEs was investigated over a range of compartments, starting from the atmospheric occurrence to the aquatic phase and the behaviour in sediments. The aim was to gather information on the OPE contamination situation in the coastal and estuarine environments, to identify specific contamination patterns for source assessment and to investigate the distribution behaviour of OPEs between gas- and particle-phases to evaluate their environmental transport mechanism. To achieve these scientific goals, sensitive and robust chemical analytical methods for the detection and quantification of OPEs in a variety of environmental samples using gas-chromatography coupled with tandem mass spectrometry were developed. Water samples were removed along the Elbe and Rhine Rivers to test the hypothesis of whether specific point sources, such as wastewater treatment plants, are the major input pathways for OPE contamination in rivers. A total of 65 water samples, including an intensive measurement campaign during the flood event in 2013 at the Elbe, was taken and analysed for OPEs. No obvious point sources were identified along either of the rivers analysed. No significant increase or decrease in the OPE concentrations or a change in patterns were observed over a transect of over 300 km at the Elbe, with an increase in water discharge of 2.5. This finding suggested that the OPE input in large rivers is primarily driven by diffuse sources, such as surface runoff, or by minor point sources rather than local point sources. To examine the specific pattern of OPE contamination in individual rivers and estuaries, 37 sediment samples from 8 rivers in Europe and China were analysed. With this analytical data, a fingerprint analysis of the OPE patterns identified could be conducted. All the rivers investigated in Europe displayed a very similar fingerprint. In contrast, the fingerprint from China differed significantly from the one in Europe. For example, in China, the OPE restricted in Europe, Tris(2-chloroethly)phosphate, was found to be one of the major OPE components, while Tris(2-butoxyethyl) phosphate, a major compound in Europe, was negligible in China. The investigation showed that the fingerprinting analysis is a useful tool to identify different regions or characterize specific rivers regarding their OPE contamination. In addition, it could be shown that legislative restriction and processes have an impact on local or even EU-wide contamination patterns. At a coastal site next to the German city of Büsum, 58 air samples were taken over one year. Using the newly developed analytical method, it was possible to analyse the gas, as well as the particle phase, of the samples collected with very low detection limits for OPEs. In contrast to expectations, no annual trend in OPE concentrations, phase distributions or patterns was observed, but the investigation of the phase distribution challenged the previous scientific consensus that OPEs occur as primarily bound to particles in the atmosphere. Several compounds were detected in significant amounts in the gas phase. To validate these novel results, a model analysis based on the chemical properties of OPEs was conducted using three different phase distribution models. The results from the environmental data were strongly supported by the simulations, and the formal knowledge could be refuted. Consequently, the atmospheric transport assumptions and estimations about the long-range transport of OPEs have to be reassessed because compounds in the gas phase undergo other types of transport degradation and elimination mechanisms than particle-boundones. The novel findings presented in this thesis challenged an important aspect regarding the perceived scientific knowledge about the behaviour of OPEs in the environment and call on the scientific community to reassess the environmental behaviour of OPEs. The insights presented on the patterns highlight the impact of environmental policies and regulatory mechanisms to work towards the final goal of a good environmental status and the avoidance of adverse effects of discarded chemicals on humans and the environment.
The emission of anthropogenic trace substances into the aquatic environment continuously poses challenges to water suppliers. The contamination of raw waters with organic trace substances requires complex water treatment processes to secure drinking water quality. The routine monitoring of these raw waters as well as the behavior and fate of organic trace substances during different treatment processes is of great interest to recognize and counter potential dangers at an early stage. Non-target screening using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) allows the detection of thousands of compounds within a single run and covers known as well as unknown substances. Compared to the established analytical techniques, this is a decisive advantage for the monitoring of raw and process waters during water treatment. While the analytical technique LC-HRMS has undergone significant developments in recent years, the algorithms for data processing reveal clear weaknesses. This dissertation therefore deals with reliable processing strategies for LC-HRMS data. The first part of this work seeks to highlight the problematics of false positive and false negative findings. Based on repeated measurements, various strategies of data processing were assessed with regard to the repeatability of the results. To ensure that real peaks were barely or not removed by the filtering procedure, samples were spiked with isotope-labeled standards. The results emphasize that the processing of sample triplicates results in sufficient repeatability and that the signal fluctuation across the triplicates emerged as a powerful filtering criteria. The number of false positives and false negatives could be significantly reduced by the developed strategies which consequently improve the validity of the data. The second part of this thesis addresses the development of processing strategies particularly aimed at assessing water treatment processes. The detected signals were tracked across the treatment process and classified based on their fold changes. A more reliable signal classification was achieved by implementing a recursive integration approach. Special integration algorithms allow a reliable signal classification even though the signal to be compared was below the intensity threshold. Different combinations of replicates of process influents and effluents were processed for evaluating the repeatability. The good repeatability was indicated by the results of both the plausibility checks and the ozonation process (ozonation of pretreated river water) and thus points to high reliability. The applicability of the developed strategies to real world applications is demonstrated in the last part of this work. Besides the prioritization of the generated results, the main focus was the identification of recognized compounds. The developed strategies clearly improve the validity of the underlying data. The combination of LC-HRMS analysis with reliable processing strategies opens up multiple possibilities for a more comprehensive monitoring of water resources and for the assessment of water treatment processes. The processing strategies and validation concepts may be easily transferred to other research fields.
After being administrated to humans or animals, pharmaceuticals may be metabolized by a variety of mechanisms and pathways within the body. Once these compounds and/or their metabolites are excreted, they may undergo degradation in the aquatic environment. Unfortunately, a rapid and complete mineralization cannot always be guaranteed, whereas relatively stable transformation products (TPs) may be formed. The largest part of older studies focused on investigation of the elimination kinetics of parent compounds without considering the amount and chemical structure of individual TPs. Only recently, there is an increasing trend to deliver such information. Nevertheless, since drugs are defined as significant environmental pollutants, it is not only important to elucidate their TPs, but also necessary to investigate whether these formed compounds preserve the same mode of action as the parent compound or are even more toxic. Thus, two main objectives of this thesis can be formulated. Firstly, to highlight the concern originated by metabolites and transformation products of pharmaceuticals that contaminate the environment. Hereby, the already-published knowledge on TPs within a certain selection of drugs is assessed to exemplify the number and quality of the existing information on their TPs. Secondly, to particularly investigate the fate of the antibiotic ciprofloxacin (CIP). This is done by (a) evaluating the suitability and sustainability of the photolytic decomposition as an advanced water treatment technique, (b) monitoring the course of genotoxicity of the irradiated mixtures using a battery of genotoxicity and cytoxicity in vitro assays, and (c) considering the potential genotoxicity for CIP´s individual TPs by the employment of in silico approaches using quantitative structure activity relationships (QSAR) models. This thesis based on the results and conclusions of five articles, which can be found in the appendix. A systematic literature review was conducted on the current state of knowledge on pharmaceuticals and its derivatives in the environment. Two groups, namely antibiotics and anticancer drugs, were considered more closely with respect to the availability of chemical structures for their TPs. Furthermore, the photodegradation of CIP as well as a preliminary toxicity assessment of its identified TPs were investigated in three research papers. An extensive review with a table at its core shows the existing data on 158 TPs, which already have an assigned registry number in chemical abstracts service (CAS-RN), was presented. In total, 294 TPs, identified with chemical structures in the literature, were found for 15 compounds out of the 21 that were selected as target compounds. Eleven TPs, created from CIP, were identified by high-performance liquid chromatography/high-resolution multiple-stage mass spectrometry. It was detected that the transformation of CIP mainly occurred through substitution of fluorine, defluorination, hydroxylation of the quinolone core and the breakdown of the piperazine ring. Some of the identified TPs of CIP were predicted as genotoxic by QSAR analysis, while the experimental testing for a few genotoxic and cytotoxic endpoints showed that the potential of the resultant mixtures could be primarily dependent on the concentration of residual CIP. In contrast, irradiation mixtures were neither mutagenic in the Ames Test nor genotoxic in the in vitro Micronucleus Test. It is possible that the effect of the TPs was masked by antagonistic mixture interactions and/or they were not formed at effectively concentrations. Nevertheless, all of the identified TPs of CIP still retained the core quinolone moiety, which is responsible for the biological activity. Thus, a more comprehensive assessment, encompassing more genotoxic endpoints, chemical analysis characterization and exposure analyses, needs to be conducted. Information available on TPs demonstrates that already slight changes in treatment conditions and processes result in the formation of different TPs. Nevertheless, most of the transformation products could neither be identified nor fully assessed regarding their toxicity. This, in turn, presents a major challenge for the identification and assessment of TPs. Hence, from a practical and sustainability point of view, limiting the input of pharmaceuticals into effluents as well as improving their (bio)degradability and elimination behavior, instead of only relying on advanced effluent treatments, is urgently needed. Solutions that focus on this
Recent studies have confirmed that the aquatic ecosystem is being polluted with an unknown cocktail of pharmaceuticals, their metabolites and/or their transformation products (TPs). Although individual pharmaceuticals are typically present at low concentrations, their continuous input into the aquatic ecosystem and their toxic and persistent presence are the major environmental concerns. Therefore, it is necessary to assess the environmental risk caused by these aquatic pollutants. Data on exposure are required for quantitative risk assessment of parent compounds and their transformation products (TPs) and/or metabolites. Such data are mostly missing, especially for TPs, because of the non-availability of TPs and very often metabolites for experimental testing. Therefore, the application of different in silico tools for qualitative risk assessment can be used. Also, the presence of these micro-pollutants (active pharmaceutical ingredients, APIs) in the aquatic cycle are increasingly seen as a challenge to the sustainable management of water resources worldwide due to ineffective effluent treatment and other measures for their input prevention. Given the poor prognosis for effluent treatment (‘end of the pipe’ approach) for input prevention of APIs in the environment, it is necessary to focus on the ‘beginning of the pipe’ strategy. The very beginning of the pipe is the molecules themselves. Therefore, novel approaches are needed like designing greener pharmaceuticals, i.e. better biodegradable ones in the aquatic environment after their release. Therefore, the present research work focused on two important topics a) assessment of the environmental risk associated with the presence of highly prescribed drugs and their TPs; b) demonstrating the feasibility of the ‘benign by design’ concept for designing biodegradable drug derivatives, which will have the better biodegradability in the environment after their release. The present thesis includes four research articles (1-4) which address these approaches. The first article is about the qualitative environmental risk assessment using the example of transformation products formed during photolysis (photo-TPs) of Diatrizoic acid (DIAT). Photolysis is the chemical reaction in which the compound is broken down by photons and often in combination with hydroxyl radicals. Photolysis is the most common abatement process of micro-pollutants in the environment. The qualitative risk assessment of DIAT and selected photo-TPs was performed by the PBT approach (i.e. Persistence, Bioaccumulation and Toxicity), using chemical analysis, experimental biodegradation test assays, QSAR models with several different toxicological endpoints and in silico read-across approaches. The second article addresses a tiered approach of implementing green and sustainable chemistry principles for theoretically designing better biodegradable and pharmacologically potent pharmaceuticals derivatives. Photodegradation process coupled with LC-MSn analysis, biodegradability testing and in silico tools such as quantitative structure-activity relationships (QSAR) analysis and molecular docking proved to be a very significant approach for the preliminary stages of designing chemical structures that would fit into the ´benign by design´ concept in the direction of green and sustainable pharmacy. Metoprolol (MTL) was used as an example. The third article was also the conceptual framework to get new drug derivatives that are biodegradable in order to tackle the global challenge of micro-pollutants in the aquatic cycle. This study increased the knowledge about the role of the attachment of certain functionalities to the parent drug molecule for its biodegradability whilst conserving drug-likeness. This approach was in the past a totally neglected issue within drug development. Atenolol (ATL), a selective β1 blocker, was selected as an example to incorporate the additional attribute such as biodegradability into its molecular structure while conserving its substructures responsible for β adrenergic receptor blocker activity. In fourth article, the concept of designing green biodegradable pharmaceuticals has been proven through expanded experimental analysis setting out from the experiences collected as described in article two and three. This study could be considered as a more extensive feasibility study of rational design of green drug derivatives. The non-selective β-blocker Propranolol (PPL) was used as an example. The risk assessment study (Article #1) contributes in enhancing the existing knowledge about the life cycle and behavior (fate) of pharmaceuticals with a special focus on photo-TPs which are generally formed during advanced effluent treatment and enter as such into the environment. Based on the obtained results, the application of the in silico tools for qualitative risk assessment analysis increased knowledge space about the environmental fate of TPs in case of their non-availability for experimental testing. The benign by design studies (Article #2-4) were based on the knowledge and experience collected during the work on DIAT. It demonstrated the feasibility of a novel approach of designing comparatively better degradable and pharmacological potent derivatives through the implementation of ´green chemistry´ principles. However, the present approach is in the juvenile stage and further knowledge has to be collected beforehand for the full implementation of this approach into drug development.
Perfluoroalkyl and polyfluoroalkyl substances (PFASs) have been widely used since 1950 in various consumer products as well as in industrial applications owing to their unique properties, e.g. being hydrophobic and lipophobic at the same time. Nowadays, some of these persistent and man-made PFASs can ubiquitously be found in humans, wildlife and various environmental media. One prominent representative of concern, belonging to the subgroup of perfluorocarboxylates (PFCs) and their conjugate acids (PFCAs), is perfluorooctanoat (PFO) and its conjugate acid (PFOA). Because of its adverse effects on human health and its persistency in the environment industry has started to replace PFO(A) and related long chain chemicals (with seven and more fully fluorinated carbon atoms) with so-called short chain PFASs (less than seven fully fluorinated carbon atoms), including precursors of PFC(A)s. Also these short chain PFC(A)s are persistent and can already be found in humans, ground- and drinking water and in remote regions. However, knowledge gaps exist in understanding the partitioning and the resulting mobility of short chain PFC(A)s in the environment. This is due to the fact that partitioning data of PFC(A)s from standardised experiments can easily be biased by various artefacts, e.g. self-aggregation of the molecules. Therefore, the objectives of this thesis are (i) to quantify the partitioning of PFC(A)s into mobile environmental media, (ii) to show how results from non-standard tests can be used to assess substance properties of concern and (iii) to conclude on whether the environmental exposure to short chain PFC(A)s is of concern from a regulatory point of view. In the first part of this thesis, the environmental mobility of short chain C4-7-PFC(A)s was investigated by quantifying their partitioning under non-standardised semi-environmental conditions into mobile environmental media, focusing on water and air, and comparing it to long chain PFC(A)s. Results are: Partitioning between water and particles in the aeration tank, primary and secondary clarifier of a wastewater treatment plant (WWTP) showed no distinct differences for short chain PFC(A)s compared to their long chain homologues (Paper 1). In a water-saturated sandy sediment column short chain PFC(A)s were not retarded, whereas long chain homologues were retarded by sorption to the sediment (Paper 2). Atmospheric particle-gas partitioning showed a lower fraction sorbed to particles for short chain PFC(A)s compared to long chain ones in samples from a WWTP (Paper 3). Air-water concentration ratios based on samples from the tanks of a WWTP were found to be higher for short chain PFC(A)s compared to long chain PFC(A)s (Paper 1). Additionally, in a newly developed experimental set-up the water to air transfer was used to derive that the pKa of C4-11-PFCAs must be <1.6 instead of up to 3.8 as reported in the literature (Paper 4). Overall, in the investigated systems short chain PFC(A)s showed a higher mobility due to a more pronounced partitioning into mobile environmental media compared to long chain PFC(A)s. In the second part of the thesis it was shown how PFO(A) - owing to its persistent, bioaccumulative and toxic (PBT-)properties – was in the context of this thesis successfully assessed as a substance of very high concern according to the criteria of the European REACH Regulation (EC No 1907/2006) by using data from non-standard tests (Paper 5). In conclusion, based on the knowledge of the high environmental mobility of short chain PFC(A)s and taking into account the argumentation of the PBT-concern of PFO(A), environmental exposure to short chain PFC(A)s is of concern and existing knowledge is already sufficient to initiate measures to prevent emissions of short chain PFC(A)s and their precursors into the environment.