Filtern
Erscheinungsjahr
Schlagworte
- Arzneimittel (5)
- Abwasser (2)
- Biodegradation (2)
- Pharmaceuticals (2)
- Photolysis (2)
- Umweltbelastung (2)
- Abbau (1)
- Abwasserbelastung (1)
- Antibiotikum (1)
- Anticancer Drug (1)
- Aquatic environment (1)
- Biochemie (1)
- Biochemistry (1)
- Biocides (1)
- Biodegradability (1)
- Biofilm (1)
- Biologische Abbaubarkeit (1)
- Biomass (1)
- Biomass burning (1)
- Biomasse (1)
- Biozide (1)
- Coastel environment (1)
- Data Mining (1)
- Degradation (1)
- Fatty Acids (1)
- Gewässer (1)
- Haushaltschemikalie (1)
- Holocene (1)
- Hydrological tracers (1)
- Kläranlage (1)
- Küstengebiet (1)
- Lipids (1)
- Pesticide formulation (1)
- Pestizid (1)
- Photodegradation (1)
- Photosynthese (1)
- Photosynthesis (1)
- Schädlingsbekämpfungsmittel (1)
- Sediment (1)
- Tiermedizin (1)
- Toxicity (1)
- Toxizität (1)
- UV photolysis (1)
- Wasserbehandlung (1)
- Wastewater (1)
- Wastewater treatment plant (1)
- Water treatment (1)
- Zahnschmelz (1)
- genotoxicity (1)
- transformation products (1)
- wastewater concentration (1)
- whole mixture toxicity (1)
The emission of anthropogenic trace substances into the aquatic environment continuously poses challenges to water suppliers. The contamination of raw waters with organic trace substances requires complex water treatment processes to secure drinking water quality. The routine monitoring of these raw waters as well as the behavior and fate of organic trace substances during different treatment processes is of great interest to recognize and counter potential dangers at an early stage. Non-target screening using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) allows the detection of thousands of compounds within a single run and covers known as well as unknown substances. Compared to the established analytical techniques, this is a decisive advantage for the monitoring of raw and process waters during water treatment. While the analytical technique LC-HRMS has undergone significant developments in recent years, the algorithms for data processing reveal clear weaknesses. This dissertation therefore deals with reliable processing strategies for LC-HRMS data. The first part of this work seeks to highlight the problematics of false positive and false negative findings. Based on repeated measurements, various strategies of data processing were assessed with regard to the repeatability of the results. To ensure that real peaks were barely or not removed by the filtering procedure, samples were spiked with isotope-labeled standards. The results emphasize that the processing of sample triplicates results in sufficient repeatability and that the signal fluctuation across the triplicates emerged as a powerful filtering criteria. The number of false positives and false negatives could be significantly reduced by the developed strategies which consequently improve the validity of the data. The second part of this thesis addresses the development of processing strategies particularly aimed at assessing water treatment processes. The detected signals were tracked across the treatment process and classified based on their fold changes. A more reliable signal classification was achieved by implementing a recursive integration approach. Special integration algorithms allow a reliable signal classification even though the signal to be compared was below the intensity threshold. Different combinations of replicates of process influents and effluents were processed for evaluating the repeatability. The good repeatability was indicated by the results of both the plausibility checks and the ozonation process (ozonation of pretreated river water) and thus points to high reliability. The applicability of the developed strategies to real world applications is demonstrated in the last part of this work. Besides the prioritization of the generated results, the main focus was the identification of recognized compounds. The developed strategies clearly improve the validity of the underlying data. The combination of LC-HRMS analysis with reliable processing strategies opens up multiple possibilities for a more comprehensive monitoring of water resources and for the assessment of water treatment processes. The processing strategies and validation concepts may be easily transferred to other research fields.
Among all attenuation processes, biodegradation plays one of the most important role and is one of the most desirable processes in the environment. To assess biodegradation, a variety of biodegradation test procedures have been developed by several international organizations. OECD guidelines for ready biodegradability testing represent one of the most prominent group of internationally used screening biodegradation tests (series 301A-F). These tests are usually very simple in their designs and allow for the fast and cheap screening of biodegradability. However, because of their stringency, the test conditions are not close to simulating environmental conditions and may lead to unrealistic results. To overcome these limitations, OECD introduced simulation tests which are designed to investigate the behavior of chemicals in specified environmentally relevant compartments. Despite the fact that simulation tests give more insight into the fate of chemicals in the environment, they are not applied frequently as they are often tedious, time consuming and expensive. Consequently, there is a need to provide a new biodegradation testing method that would combine complex testing environment as in simulation tests, easiness in handling and good data repeatability as in screening biodegradation tests. Another challenge is an adaption of the existing biodegradation testing methods to new types of samples, i.e. mixtures of transformation products (TPs). The research on the presence of pharmaceuticals in the environment gained momentum in the 1990s; since then, it has been growing. Their presence in the environment is a wellestablished fact. A wide range of pharmaceuticals is continuously detected in many environmental compartments such as surface waters, soils, sediments, or ground waters. After pharmaceuticals reach the natural aquatic environment they may undergo a number of processes such as: photolysis (under direct sunlight), hydrolysis, oxidation and reduction reactions, sorption, biodegradation (by bacteria of fungi), and bioaccumulation. These processes, may cause their elimination from aquatic environment, if reaction is complete, or creation of new compounds i.e., transformation products (TPs). What is more, processes, like chlorination and advanced oxidation processes (AOPs), such as H2O2/UV, O3/UV, TiO2/UV, Fenton, and photo-Fenton, or UV treatment which might be applied in water or wastewater treatment, may also lead to the TPs introduction into aquatic environment. The research on the TPs brings many new challenges. From one side, there is a constant need for the the development of a sensitive and reliable analytical separation, detection, and structure elucidation methods. Additionally, there is a need for the preparation of appropriate assays for the investigation of properties of new compounds, especially those answering the question if TPs pose a higher risk to the aquatic ecosystems than their parent compounds. Among numerous groups of pharmaceuticals, two are of great importance: antibiotics since they might promote emergence and maintenance of antimicrobial resistance in the aquatic environment; and cytostatic drugs. Cytostatic drugs can exert carcinogenic, mutagenic and/or teratogenic effects in animals and humans. The challenges of biodegradation testing presented in this thesis, encompasses these different areas of interest and was divided into three objectives: 1) Identification of the knowledge gaps and data distribution of the two groups of pharmaceuticals antibiotics and cytostatic drugs (article I); 2) Increasing the knowledge on biodegradation of cytostatic drugs and their TPs (articles II, III, and IV) and 3) Establishment of a biodegradation test with closer to simulation tests conditions, that could be affordable and to support better understanding on processes in water sediment interface construction - screening water-sediment test. Further validation of the test with an insight into sorption and desorption processes (articles V and VI).
Siliziumorganische Substanzen sind aus dem Alltag kaum wegzudenken. Sie kommen in vielfältiger Form vor und finden durch ihre Stabilität in vielen Produkten des Haushalts und der Industrie Anwendung. Eine Freisetzung in die Umwelt ist unvermeidbar. Siliziumorganische Substanzen konnten bereits in allen Umweltkompartimenten (Luft, Wasser, Boden) analytisch nachgewiesen werden. Welche Risiken von dieser Stoffgruppe ausgehen, ist noch nicht abschließend geklärt. Dennoch gibt es Hinweise auf negative Auswirkungen auf Mensch und Umwelt. Deshalb sollten Strukturen in siliziumorganischen Substanzen untersucht werden, die einen Abbau in der Umwelt begünstigen, um die Akkumulation dieser Stoffe in der Umwelt zu verringern. Dafür wurden diverse biotische und abiotische Abbautests mit unterschiedlichen siliziumorganischen Substanzen durchgeführt. Der Fokus der vorliegenden Arbeit lag vor allem in der biologischen Abbaubarkeit der Substanzen. Es wurden die Organisation for Economic Co-operation and Development (OECD)-konformen Tests Closed-Bottle-Test (CBT, OECD 301D) und Manometrischer Respirationstest (MRT, OECD 301F) durchgeführt. Die Hydrolysierbarkeit wurde mithilfe des Hydrolysetests OECD 111 bei unterschiedlichen pH-Werten untersucht. Bei bestimmten Substanzgruppen ohne biologischen Abbau wurde das Verhalten der Substanzen bei Bestrahlung mit verschiedenen Bestrahlungsquellen untersucht. Die Analyse der Primärelimination der siliziumorganischen Substanzen erfolgte je nach Substanzeigenschaften mithilfe der Hochleistungsflüssigkeitschromatografie gekoppelt mit einem Spektrometer mit ultraviolettem und sichtbarem Licht (HPLC-UV/Vis) oder der Gaschromatografie gekoppelt mit einem Massenspektrometer (GC-MS). Die Transformationsprodukte wurden hingegen mithilfe der Flüssigkeitschromatografie gekoppelt mit einem Mehrfach-Massenspektrometer (LC-MSn) analysiert. Für eine umfassende Bewertung des biologischen Abbaus von siliziumorganischen Substanzen wurden ein Vergleich mit analogen Kohlenstoffverbindungen und eine Aufstockung mit Daten aus der Datenbank der Europäischen Chemikalien Agentur (ECHA) durchgeführt. Die Gruppierung der Substanzen nach ihren Strukturmerkmalen wurde hinzugezogen, um Rückschlüsse auf die Abbaubarkeit zu ziehen. Eine besser biologisch abbaubare Grundstruktur brachte für die Benzenderivate keine Verbesserung der biologischen Abbaubarkeit. Dennoch hatte die Einführung von +M-Gruppen am Aromaten einen positiven Einfluss auf die Geschwindigkeit und den Grad des photolytischen Abbaus. Die Bestrahlungsquelle hatte ebenfalls einen deutlichen Einfluss auf die Eliminierungsrate während des Photolyseexperiments. Mit einer Veränderung der Wellenlängen in den kurzwelligen Bereich und der daraus resultierenden energiereicheren Strahlung konnten die Substanzen schneller und teilweise vollständig primär eliminiert werden. Bei allen Abbaupfaden hatte die Hydrolyse eine entscheidende Rolle und wurde als einer der Hauptabbauprozesse charakterisiert. Bei einer Verbindung wurde im Nachgang an die biotischen und abiotischen Abbautests eine ausführliche Aufklärung der elf gebildeten Transformationsprodukte vorgenommen. Um den Einfluss von Silizium in organischen Substanzen auf die biologische Abbaubarkeit zu untersuchen, wurde der direkte Vergleich von siliziumorganischen Substanzen und deren Kohlenstoffanaloga im CBT durchgeführt. Dabei hat sich gezeigt, dass drei von fünf Kohlenstoffverbindungen und keine siliziumorganische Verbindung als leicht biologisch abbaubar eingestuft werden konnten. In allen bis auf einen Fall konnten für die Kohlenstoffverbindungen höhere Abbauraten im CBT beobachtet werden. Die Hydrolyse wurde als erforderlicher Schritt vor dem biologischen Abbau von siliziumorganischen Substanzen identifiziert. Das siliziumfreie Produkt der Hydrolyse bestimmte den Grad des biologischen Abbaus. Die gute biologische Abbaubarkeit der einen siliziumorganischen Verbindung resultierte aus der leicht hydrolysierbaren Silizium-Stickstoff-Bindung und der leichten biologischen Abbaubarkeit des siliziumfreien Hydrolyseproduktes. Die siliziumhaltigen Reaktionsprodukte der Hydrolyse waren nicht biologisch abbaubar. Bioabbaudaten aus eigenen Experimenten, aus vorhergehenden in der Arbeitsgruppe durchgeführten analogen Arbeiten und aus der ECHA-Datenbank wurden zusammengetragen, um einen Datensatz zu generieren. Die 182 Substanzen des Datensatzes wurden hinsichtlich ihrer Struktur gruppiert, um allgemeine Erkenntnisse für die biologische Abbaubarkeit von siliziumorganischen Verbindungen abzuleiten. Es gab Gruppen mit Substanzen, die überhaupt nicht biologisch abbaubar waren (z. B. zyklische, lineare und verzweigte Siloxane). Gruppen, die Substanzen mit Ethern, Estern, Oximen, Aminen und Amiden enthielten, waren hydrolyseanfällig, sodass auch leicht biologisch abbaubare Zwischenprodukte gebildet werden konnten. Die siliziumfreien Hydrolyseprodukte waren meist biologisch abbaubar, während die siliziumhaltigen Hydrolyseprodukte persistent waren. Allgemein hat sich gezeigt, dass Modifikationen am Molekül einen positiven Einfluss auf die Abbaubarkeit haben können. Beispielsweise können Heteroatome eine Veränderung der Polarität bzw. der Elektronendichte hervorrufen, was die Photolyse- und Hydrolysefähigkeit und folglich auch den Bioabbau zum Positiven verändern kann. Das Einführen solcher Heteroatome oder funktioneller Gruppen in Polysiloxanketten kann demnach ein vielversprechender Ansatz für leichter abbaubare siliziumorganische Verbindungen sein. Nicht abbaubare Stoffe sollten vermieden werden, wenn sie nach ihrer Verwendung in die Umwelt gelangen.
Uranine (sodium fluorescein, UR) has been routinely used in hydrological research to monitor surface and subsurface water flow, transport and mixing processes since the end of nineteenth century. Based on such obtained data, further conclusions can be drawn on the spread and behavior of pollutants (partly on models). Use of UR for qualitative (visual) studies of underground contamination is common, however data available on its environmental behavior (e.g., conversion, degradation or formation and fate of the transformation products, TPs) are incomplete or not readily comparable. UR observations of biodegradation are still speculative. S-metolachlor (SM) is a popular worldwide chloroacetamide herbicide, which highly correspond to the global pesticide use. It is offered on the French market as an effective multicrop herbicide against annual grasses and certain broadleaf weeds under the trade name Mercantor Gold (MG). Photodegradation contributes to the fate of SM in the aquatic environment. TPs were already found in surface and groundwater. However, further fate and assessment of the TPs was not done. Moreover, adjuvants in MG´s formula can affect the solubility, biodegradation, photolysis and sorption properties of the active compound SM. TPs can have different properties (e.g. more mobile, toxic or present at higher concentrations) that enable them to reach the environmental compartments not affected by the parent compound (PC) itself. To assess the ecological impact of pesticides, tracers, and their respective TPs on water organisms, their behavior can be investigated in laboratory screening biodegradation tests. Yet, incomplete data was available on SM, MG and UR transformation or their photo- TPs´ fate in surface and water-sediment systems. The combination of photolysis with aerobic biodegradation in order to identify persistent photo-TPs could provide new insight into the environmental behavior of the selected compounds. Therefore, principle of this thesis was to 1) identify the impact of MG´s adjuvants on the biodegradation, photolysis (Xe lamp) and sorption compared to the SM alone, 2) examine the photolysis and biodegradability of UR 3) monitor the primary elimination (photolysis) of the PCs by HPLC (-UV, -FLD) and measure the degree of mineralization by means of nonpurgeable organic carbon (NPOC) 4) elucidate the photo-TPs of SM, MG and UR by using LCMS/ MS 5) analyze biodegradability of the photo-TPs in order to determine their fate and persistence in aquatic environment 6) conduct in silico toxicity predictions (pesticides) in human (carcinogenicity, genotoxicity and mutagenicity) and eco-toxicity (microtoxicity, bioconcentration factor and toxicity in rainbow trouts). SM, MG and UR were found not readily biodegradable in Closed Bottle test (CBT), Manometric Respiratory test (MRT) and in water-sediment test (WST). Chemical analysis of photolysis samples showed higher elimination of SM in MG compared to SM alone whereas UR displayed high primary elimination rate in general. The overall low degree of mineralization indicated that abundant photo-TPs were formed. Furthermore, the photo-TPs were found not biodegradable in performed biodegradation tests. Only small degradation rates for UR could be observed in the CBT and WST. Additionally, in the MRT and WST new bio-TPs were generated from the photo-TPs of SM and SM in MG. Obtained results suggest that the MG formulation did not significantly affect the biodegradation, however it influenced the diffusion of the active substance (SM) to sediment and potentially affected the photolysis efficiency, which might result in faster formation of photo-TPs in the environment. In silico predictions showed that for many endpoints, biotransformation might lead to an increased toxicity in humans and to water organisms compared with the parent compound SM. No indications were found for UR toxicity. Still, target-oriented investigations on long term impacts of photo-TPs from UR are warranted. The present work demonstrates that a combination of laboratory tests, analytical analysis and in silico tools result in valuable information regarding environmental fate of the TPs from selected compounds. Furthermore, it was shown that photo-TPs formed in the aquatic environment should be taken into account not only the parent compound and its decay.
After being administrated to humans or animals, pharmaceuticals may be metabolized by a variety of mechanisms and pathways within the body. Once these compounds and/or their metabolites are excreted, they may undergo degradation in the aquatic environment. Unfortunately, a rapid and complete mineralization cannot always be guaranteed, whereas relatively stable transformation products (TPs) may be formed. The largest part of older studies focused on investigation of the elimination kinetics of parent compounds without considering the amount and chemical structure of individual TPs. Only recently, there is an increasing trend to deliver such information. Nevertheless, since drugs are defined as significant environmental pollutants, it is not only important to elucidate their TPs, but also necessary to investigate whether these formed compounds preserve the same mode of action as the parent compound or are even more toxic. Thus, two main objectives of this thesis can be formulated. Firstly, to highlight the concern originated by metabolites and transformation products of pharmaceuticals that contaminate the environment. Hereby, the already-published knowledge on TPs within a certain selection of drugs is assessed to exemplify the number and quality of the existing information on their TPs. Secondly, to particularly investigate the fate of the antibiotic ciprofloxacin (CIP). This is done by (a) evaluating the suitability and sustainability of the photolytic decomposition as an advanced water treatment technique, (b) monitoring the course of genotoxicity of the irradiated mixtures using a battery of genotoxicity and cytoxicity in vitro assays, and (c) considering the potential genotoxicity for CIP´s individual TPs by the employment of in silico approaches using quantitative structure activity relationships (QSAR) models. This thesis based on the results and conclusions of five articles, which can be found in the appendix. A systematic literature review was conducted on the current state of knowledge on pharmaceuticals and its derivatives in the environment. Two groups, namely antibiotics and anticancer drugs, were considered more closely with respect to the availability of chemical structures for their TPs. Furthermore, the photodegradation of CIP as well as a preliminary toxicity assessment of its identified TPs were investigated in three research papers. An extensive review with a table at its core shows the existing data on 158 TPs, which already have an assigned registry number in chemical abstracts service (CAS-RN), was presented. In total, 294 TPs, identified with chemical structures in the literature, were found for 15 compounds out of the 21 that were selected as target compounds. Eleven TPs, created from CIP, were identified by high-performance liquid chromatography/high-resolution multiple-stage mass spectrometry. It was detected that the transformation of CIP mainly occurred through substitution of fluorine, defluorination, hydroxylation of the quinolone core and the breakdown of the piperazine ring. Some of the identified TPs of CIP were predicted as genotoxic by QSAR analysis, while the experimental testing for a few genotoxic and cytotoxic endpoints showed that the potential of the resultant mixtures could be primarily dependent on the concentration of residual CIP. In contrast, irradiation mixtures were neither mutagenic in the Ames Test nor genotoxic in the in vitro Micronucleus Test. It is possible that the effect of the TPs was masked by antagonistic mixture interactions and/or they were not formed at effectively concentrations. Nevertheless, all of the identified TPs of CIP still retained the core quinolone moiety, which is responsible for the biological activity. Thus, a more comprehensive assessment, encompassing more genotoxic endpoints, chemical analysis characterization and exposure analyses, needs to be conducted. Information available on TPs demonstrates that already slight changes in treatment conditions and processes result in the formation of different TPs. Nevertheless, most of the transformation products could neither be identified nor fully assessed regarding their toxicity. This, in turn, presents a major challenge for the identification and assessment of TPs. Hence, from a practical and sustainability point of view, limiting the input of pharmaceuticals into effluents as well as improving their (bio)degradability and elimination behavior, instead of only relying on advanced effluent treatments, is urgently needed. Solutions that focus on this
Mikroalgen können bei den internationalen Bemühungen zur Begrenzung der CO2-Emissionen einen wichtigen Beitrag leisten. In der Photosynthese der Mikroalgen wird das CO2 aus der Atmosphäre in Biomasse fixiert. Im Gegensatz zu Landpflanzen können Mikroalgen zudem exponentiell wachsen, haben geringere Anforderungen an die Wasserqualität und konkurrieren nicht mit Agrarflächen, die begrenzt und für die Nahrungsmittelsicherheit der Weltbevölkerung erforderlich sind. Die produzierte Mikroalgenbiomasse kann als regenerative Ressource zu Biokraftstoffen wie Biogas und Biodiesel umgewandelt und somit als Energieträger genutzt werden. Zudem können Mikroalgen auch bei der biotechnologischen Produktion kommerziell relevanter Wertstoffe wie Pigmenten und Omega-3-Fettsäuren für die Nahrungsmittelindustrie Anwendung finden. Mit dem Ziel der Steigerung dieser Wertstoffe stand die Untersuchung des Einflusses der Kultivierungsparameter Licht und Temperatur auf das Wachstum und die Zusammensetzung der Mikroalgenbiomasse im Mittelpunkt dieser Dissertation. Insbesondere der Einfluss unterschiedlicher Lichtspektren auf das Wachstum und die Wertstoffproduktion in Mikroalgen wurde detailliert untersucht. Zusätzlich wurde überprüft, ob sich die gewonnenen Erkenntnisse auch auf Landpflanzen übertragen lassen. Im Rahmen dieser Promotion wurde erstmals systematisch der Einfluss unterschiedlicher Temperaturen und Lichtspektren im zeitlichen Verlauf der Kultivierung auf Mikroalgen untersucht. Hierbei konnten distinkte Spektralbereiche sowie Temperaturen ermittelt werden, die für eine maximale Produktion von Biomasse und Pigmenten sowie einem maximalen Desaturierungsgrad der Fettsäuren erforderlich sind. Die in dieser Arbeit gewonnenen Erkenntnisse tragen zu einem besseren Verständnis der Biochemie von photosynthetischen Organismen bei.
Pestizide werden als Pflanzenschutzmittel im landwirtschaftlichen Bereich und als Biozide z. B. in der Industrie, in Haushalten und Kommunen eingesetzt. Bereits auf den behandelten Flächen und in den angrenzenden Gewässern können Pestizide Abbauprozessen durch u. a. Photolyse unterliegen. Diese Prozesse führen zur Entstehung von Transformationsprodukten (TP), deren Berücksichtigung bei der Umweltrisikobewertung für ein umfassendes Risikomanagement von großer Bedeutung ist. Doch gibt es über die in der Umwelt vorkommenden Transformationsprozesse und die dabei entstehenden TP immer noch Wissenslücken. Darüber hinaus sind die Eintragswege von TP, vor allem von Biozid-TP, in die angrenzenden Gewässer zum Teil unbekannt. Da eine Vielzahl von TP mit unterschiedlich starken ökotoxikologischen Effekten bewertet werden muss, besteht ein großer Bedarf an schnellen und umfassenden Methoden, um die stetig wachsende Anzahl an Chemikalien auf dem Markt erfassen zu können. Das Ziel der vorliegenden Arbeit ist daher, das Verhalten und den Verbleib ausgewählter Pestizid-TP in der aquatischen Umwelt zu analysieren. Zu diesem Zweck wurden unterschiedliche Phototransformationsprozesse von Pestiziden sowie der Eintrag aus Fassaden über Regenwasserversickerungsanlagen (RVA) in angrenzenden Gewässern der Stadt Freiburg untersucht. Schlussendlich erfolgte die Identifizierung der ökotoxikologischen Eigenschaften von 45 Pestizid-TP in einem mehrstufigen Ansatz durch die Kombination experimenteller und computerbasierter Methoden. Inwiefern unterschiedliche Phototransformationsprozesse zu unterschiedlichen TP führen, wurde im ersten Teil der Arbeit durch einen Vergleich der Entstehung von TP durch direkte und indirekte Photolyse der Substanzen Penconazol, Terbutryn und Mecoprop untersucht. Weiterhin wurde der Abbau durch die Bestrahlung mit unterschiedlichen Xenonlampen untersucht. Im zweiten Teil der Arbeit wurde der Eintrag von Bioziden, die in Fassadenanstrichen Anwendung finden, und deren TP über Regenwasserversickerungsanlagen in das Grundwasser untersucht. Dabei wurden qualitative und quantitative Target-Screening-Methoden zum Nachweis und zur Quantifizierung bekannter und unbekannter TP der Biozide Diuron, Terbutryn und Octhilinon (OIT) in der aquatischen Umwelt mittels Flüssigkeitschromatographie mit gekoppeltem Massenspektrometer (LC-MS) kombiniert. Die ökotoxikologischen Eigenschaften von 45 Pestizid-TP wurden im dritten Teil dieser Arbeit in einem mehrstufigen Ansatz untersucht. Insgesamt zeigte sich, dass die Berücksichtigung von TP im Rahmen von Gewässerüberwachung und Risikobewertung eine genauere Abschätzung der Risiken durch Schadstoffe ermöglicht. Die in dieser Dissertation entwickelte Vorgehensweise, bei der TP zunächst im Labor erzeugt und bewertet und anschließend in aquatischen Systemen gezielt analysiert werden, kann einen wichtigen Beitrag zur Regulatorik des Einsatzes und der Zulassung von Pestiziden leisten.
Verbräuche von Arzneistoffen, die auf das menschliche Nervensystem wirken (Neurologika), unterliegen aufgrund der auf dem Markt befindlichen Arzneistoffvielfalt einem ständigen Wandel. Zudem waren die Haupteintragspfade für Neurologika in die aquatische Umwelt bisher nicht eindeutig geklärt. Haushalte (diffuser Eintrag) und Einrichtungen des Gesundheitswesens (punktueller Eintrag), wie psychiatrische Fachkliniken oder Pflegeheime, wurden als maßgebliche Eintragspfade diskutiert. Ziel dieser Arbeit war es deshalb, Arzneimittelverbräuche und damit verbundene Arzneistoffemissionen durch Haushalte und Einrichtungen des Gesundheitswesens mit Hilfe einer neu entwickelten Methode abzuschätzen. Bei dieser Methode wurde das jeweilige Ausmaß der Emissionen durch die Kalkulation von Abwasserkonzentrationen und den Vergleich von Verbrauchsmengen an Arzneistoffen bestimmt. Im Ergebnis konnte gezeigt werden, dass sich Arzneimittelverbrauchsmuster in psychiatrischen Fachkliniken und Pflegeheimen von denen in allgemeinen Krankenhäusern und Haushalten unterscheiden. Außerdem konnte mit dieser Methode deren jeweiliger Beitrag am gesamten Arzneistoffeintrag in das kommunale Abwasser eingeschätzt und in hohen Mengen in das Abwasser eingetragene Arzneistoffe identifiziert werden. Durch Haushalte wurde das hinsichtlich des Umweltverbleibs und -verhaltens wenig untersuchte Antiepileptikum Gabapentin in hohen Mengen in das Abwasser eingetragen. Die Bedeutung von Einrichtungen des Gesundheitswesens am Arzneimitteleintrag in das kommunale Abwasser konnte für alle untersuchten Einrichtungstypen im Vergleich zu Haushalten als gering eingestuft werden. Bestimmte einrichtungstypische Arzneistoffe, insbesondere Neurologika, können bei regionaler Betrachtung jedoch eine größere Rolle spielen. Insbesondere Quetiapin wurde in psychiatrischen Fachkliniken und Pflegeheimen als Substanz mit hohen Verbrauchsmengen und hohem Emissionspotential identifiziert. Ausgehend von diesen Erkenntnissen wurden Gabapentin und Quetiapin tiefergehend hinsichtlich ihres Verbleibs und ihres Verhaltens in der aquatischen Umwelt charakterisiert. Beide Arzneistoffe wurden bei verschiedenen Startkonzentrationen zur Simulation eines technischen Behandlungsverfahrens mit UV-Licht bestrahlt. Im weiteren Verlauf wurden Gabapentin und Quetiapin und die jeweilige Muttersubstanz im Gemisch mit gebildeten Phototransformationsprodukten hinsichtlich biologischer Abbaubarkeit im Closed Bottle Test und im Manometrischen Respirationstest nach OECD-Richtlinien und hinsichtlich toxischer Eigenschaften im Leuchtbakterientest und im Umu-Test beurteilt. Die Strukturaufklärung von Photo- und Biotransformationsprodukten erfolgte mittels hochauflösender Massenspektrometrie. Im Ergebnis konnten weder Gabapentin noch Quetiapin bei hohen Startkonzentrationen durch Photolyse über 128 min mineralisiert oder vollständig eliminiert werden. Identische Phototransformationsprodukte wurden bei unterschiedlichen Startkonzentrationen für die UVBehandlung gebildet. Die Arzneistoffe Gabapentin und Quetiapin waren nach OECD-Richtlinien im Closed Bottle Test nicht leicht biologisch abbaubar. Die photolytischen Gemische von Gabapentin sind nicht besser als Gabapentin selbst abbaubar und die Phototransformationsprodukte wurden im Closed Bottle Test ebenfalls nicht eliminiert. Auch das photolytische Gemisch von Quetiapin im Closed Bottle Test war nicht besser biologisch abbaubar als Quetiapin selbst. Die Phototransformationsprodukte von Quetiapin und Quetiapin selbst unterlagen beim Closed Bottle Test und im Manometrischen Respirationstest verschiedenen biologischen Transformationsprozessen und führten zur Bildung von verschiedenen Biotransformationprodukten. Das in biologischen Abbautests von Quetiapin maßgeblich gebildete Biotransformationprodukt BTP 398 konnte in diversen Flusswasserproben nachgewiesen werden. Dies lässt sich höchstwahrscheinlich damit erklären, dass BTP 398 unter anderem auch beim humanen Metabolismus gebildet wird. Die Langzeit-Leuchthemmung und die Zellvermehrungshemmung im Leuchtbakterientest stiegen im Verlauf der Photolyse von Gabapentin durch Bildung von Phototransformationsprodukten. Dies deutet auf eine erhöhte Toxizität der Phototransformationsprodukte im Vergleich zu Gabapentin hin. Bei Quetiapin war unter Photolyse keine Abnahme der schon vorhandenen Toxizität beim Leuchtbakterientest zu erkennen. Gabapentin, Quetiapin und deren Phototransformationsprodukte wiesen im Umu-Test keine Genotoxizität auf. …
The principle of this thesis was to study the environmental fate of three highly used psychotropic drugs and this achieved through: 1) examining the biodegradability of TMI, DMI and CPTX, 2) studying the behaviour of TMP, DMI and CPTX in photodegradation tests using Xe and UV lamps with studying the effect of different environmental conditions on their UV-photodegradation behaviour, 3) monitoring the primary elimination of TMP, DMI and CPTX during photodegradation and biodegradation tests using HPLC, and measuring their degree of mineralization by means of dissolved organic carbon analyser (DOC), 4) elucidating the structures of the transformation products (TPs) which formed during the degradation of TMI, DMI and CPTX by using LC-MS/MS analysis, 5) analysing the biodegradability of their TPs by laboratory tests and in-silico assessments in order to determine the fate and persistence of these TPs in the aquatic environment, 6) conducting in-silico toxicity predictions for the selected psychotropic drugs and their TPs in human (carcinogenicity, genotoxicity and mutagenicity) and in eco-system (toxicity to microorganisms and toxicity in rainbow trouts). As an overall conclusion, the present work demonstrates that a combination of laboratory simulation tests, LC-MS/MS analysis and in-silico tools result in valuable new information regarding environmental fate of three important psychotropic drugs and their TPs. This dissertation also highlights that different environmental conditions such as temperature, initial drug concentration and pH can differently affect the degradation behaviour of pharmaceuticals even when they are highly structurally related. Therefore, one cannot conclude from one pharmaceutical to another but each one needs to be investigated individually and this present a great challenge for risk assessment kinetics of chemicals in the aquatic environment. The results presented here showed that the investigated pharmaceuticals and their TPs can negatively affect the environment which may be harmful to the ecosystem as they might have been present for decades in the aquatic environment without any knowledge of their environmental fate or connected risk. Therefore, further work needs to be done including analysis of environmental samples (e.g., surface waters), as well as laboratory toxicity tests to further expand knowledge on their exact environmental impact.
Fire plays an important role in the earth system by influencing ecosystems and climate, but climate in turn also influences fire. The system became more complex when humans started using fire as a tool. Understanding the interaction between humans, fire and climate is the major aim of paleofire research. Understanding changes in these three aspects in the past will help predicting future climate, fire and human interactions. The use of lake sediment cores as natural archives for reconstructing past fire activity by counting charcoal particles is well established. This present dissertation is dedicated to the evaluation and application of specific organic molecular markers for biomass burning: levoglucosan, mannosan and galactosan were used as proxies for reconstructing past fire activity in lake sediments thorough the entire Holocene. First, a new analytical method was developed using high-performance anion exchange chromatography combined with mass spectrometry to separate and detect these three monosaccharide anhydrides in lake sediments. The suitability of this analytical method was proven by comparing the levoglucosan, mannosan and galactosan results in selected lake sediment samples from Lake Kirkpatrick, New Zealand and by correlating the results with macroscopic charcoal. Furthermore, the method was successfully applied to a lake sediment core from Lake Petén Itzá, Guatemala to reconstruct regional Holocene fire history. The analyses of levoglucosan were combined with fecal sterols to reconstruct late Holocene human fire interactions at Lake Trasimeno, Italy, demonstrating low fire activity during the Roman period. This combination of studies proves that these molecular markers are valid fire proxies in sediments from multiple locations around the globe. Comparison of levoglucosan, mannosan and galactosan concentrations with macroscopic charcoal trends in Lake Kirkpatrick and Lake Petén Itzá, suggests that the molecular markers represent more regional fire history and low temperature fires in contrast to macroscopic charcoal, which is a local fire proxy. In addition, vegetation changes (Lake Kirkpatrick and Lake Petén Itzá) and charcoal morphotypes (Lake Petén Itzá) were compared to the levoglucosan/mannosan and levoglucosan/(mannosan+galactosan) ratios suggesting that these ratios may be a suitable tool to track burned fuel. Biodegradation tests demonstrate the potential degradation of levoglucosan, mannosan and galactosan if dissolved in water, but findings in ancient sediment samples suggest that particle-bound levoglucosan, mannosan and galactosan can be buried in sediments over millennial time scales. Although uncertainties still exist, the results of this research suggests that organic molecular markers are a suitable regional fire proxy and isomer ratios may help understand changes in burned vegetation.