Filtern
Erscheinungsjahr
- 2020 (14) (entfernen)
Dokumenttyp
- Dissertation (11)
- Bachelorarbeit (2)
- Habilitation (1)
Schlagworte
- Transformation (2)
- Discourse Studies (1)
- Energiepolitik (1)
- Energy Policy (1)
- Institutional Change (1)
- Institutioneller Wandel (1)
- Sustainability Research (1)
- Transdisciplinarity (1)
Institut
- Fakultät Nachhaltigkeit (14) (entfernen)
Comparable collaborations between farmers and institutions with communal catering have been less in research focus so far. Within the region of Lüneburg, an example for such a regional-organic cooperation is not known yet. Thus,this work represents the starting point to fill the research gap within the field of sustainable food systems in urban living labs as part of the research project GLOCULL (Globally and Locally-sustainable food-water-energy innovation in Urban Living Labs). The work aims at building up such a regional-organic food cooperation between a local farmer and a kindergarten community catering servicebased on scientific insights and practical persons’ knowledge.
The aim of this paper is to determine how a carbon footprint label for grocery products can be designed to facilitate a sustainable consumption behaviour. Therefore, a mixed-method approach was used consisting out of a review of relevant literature and an explorative quantitative survey with n=158 participants. It was found that consumers generally have a positive attitude towards carbon labelling, but they lack understanding of the term, its underlying concepts and the emissions caused by grocery products. In regard to the design criteria of a carbon label, labels with a coloured scale are preferred most by consumers. Also, the mechanisms of consumer behaviour imply that not all parts of the behaviour are visible and controllable for individuals themselves. The concluding concept proposal summarises important criteria of a carbon labelling system that has the goal to educate consumers and facilitate a lower carbon consumption behaviour, such as a simple visual design, the use of a colour scale, a design enabling a comparison, the provision of a link to further information, the public enforcement of the system and overall uniformity.
Die Energiewende steht im Zentrum aktueller gesellschaftlicher Debatten. Die Frage ist: Wie kann die gegenwärtige Klimakrise aufgehalten und gleichzeitig der Energiebedarf gedeckt werden? Einigkeit besteht darüber, dass eine Strategie zur Energiewende die Umstellung auf erneuerbare Energieträger beinhalten muss. Das Problem ist: Zentrale Begriffe wie "erneuerbare Energieträger " sind uneindeutig und deshalb besonders für naturwissenschaftliche Laien missverständlich. Ihnen wird dadurch die gesellschaftliche Teilhabe an der Debatte erschwert. Wie kann der naturwissenschaftliche Unterricht dazu beitragen, die oben benannten Missverständnisse aufzuklären? Er muss die Schüler dabei unterstützen, die naturwissenschaftlichen Schlüsselprinzipien der verschiedenen Energieträger und darauf aufbauend die Energiewende angemessen zu verstehen. Zu diesem Zweck muss der Unterricht entsprechend strukturiert werden. Welche Leitlinien sowohl die Lehrkräfte der Naturwissenschaften als auch die Entwickler der Unterrichtsmaterialien dabei beachten sollten: Das klärt die vorliegende Studie. Hierfür wird das Modell der didaktischen Rekonstruktion als Forschungsrahmen genutzt. Ausgehend von einem gemäßigt konstruktivistischen Lehr-Lernverständnis werden drei Unterfragen beantwortet: (1) Welche vorunterrichtlichen Vorstellungen bringen Schüler in den Unterricht mit? (2) Welche Vorstellungen haben Wissenschaftler? (3) Welche Unterschiede ergeben sich im Vergleich der Vorstellungen? Für die Beantwortung dieser Fragen wurden in der Erhebung problemzentrierte, leitfadengestützte Interviews mit 27 Achtklässlern geführt und Auszüge aus zwei wissenschaftlichen Gutachten ausgewählt. Mit einer qualitativen Inhaltsanalyse konnten in der Auswertung Inhaltsaspekte identifiziert werden, die Potenzial für die unterrichtliche Vermittlung haben. Mit dem so reduzierten Datenmaterial wurde eine systematische Metaphernanalyse durchgeführt. Damit wurden erfahrungsbasierte Muster hinter den Vorstellungen rekonstruiert. Aus dem systematischen Vergleich der Ergebnisse lassen sich Lernchancen und Lernhindernisse für das Verstehen von naturwissenschaftlichen Hintergründen der Energiewende ableiten. Diese werden in Form von Leitlinien für den naturwissenschaftlichen Unterricht zusammengefasst. Diese Leitlinien können von Lehrpersonen und Entwicklern von Lehrmaterialien genutzt werden, um ein fachlich angemessenes Verstehen der naturwissenschaftlichen Schlüsselprinzipien der Energieträger und der Energiewende zu fördern.
Tropical forests worldwide support high biodiversity and contribute to the sustenance of local people’s livelihoods. However, the conservation and sustainability of these forests are threatened by land-use changes and a rapidly increasing human population. This dissertation, therefore, aimed to characterize biodiversity patterns in the moist Afromontane forests of southwestern Ethiopia and to examine how biodiversity patterns are affected by land-use and land-use changes (mediated by coffee management intensity, landscape attributes and housing development) in a context of a rapidly growing rural population. To achieve this goal, the author takes an interdisciplinary approach where, first, she examined the effects of coffee management intensity on diversity patterns of woody plants and birds, spanning a gradient of site-level disturbance from nearly undisturbed forest interior to highly managed shade coffee forests. Results showed that specialized species of woody plants (forest specialists) and birds (forest specialists, insectivores and frugivores) were affected by coffee management intensity. The richness of forest specialist trees and the richness and/or abundance of insectivores, frugivores and forest specialist birds decrease with increasing levels of disturbance. Second, the author investigated the effects of landscape context on woody plants, birds and mammals. Community composition and specialist species of woody plants and birds were sensitive to landscape context, where woody plants responded positively to gradients of edge-interior and birds to gradients of edge-interior and forest cover. Further results showed that a diverse mammal community, with 26 species, occurs at the forest edge of shade coffee forests and that the leopard, an apex predator in the region depended on large areas of natural forest. A closer examination of leopard activity patterns revealed a shift in the diel activity as a response to human disturbance inside the forest, further highlighting the importance of natural undisturbed forests for leopards in the region. Together, these findings demonstrate the value of low managed shade coffee forests for biodiversity, and importantly, emphasize the irreplaceable value of undisturbed natural forests for biodiversity. Third, the researcher investigated the effects of prospective rural population growth (mediated by housing development) on the forest mammal community. Here, population growth was projected to negatively influence several mammal species, including the leopard. Housing development that encroached the forest entailed worse outcomes for biodiversity than a combination of prioritized development in already developed areas and coffee forest protection. Fourth, to understand the motivations behind high human fertility rates in the region, she examined the determinants of women fertility preferences, including their perceptions on social and biophysical stressors affecting local livelihoods such as food insecurity and environmental degradation. Fertility preferences were influenced by underlying social norms and mindsets, a perceived utilitarian value of children and male dominance within the household, and were only marginally affected by perceptions of social and biophysical stressors. The findings suggest the need for new deliberative and culturally sensitive approaches that engage with pervasive social norms to slow down population growth. Overall, this dissertation demonstrates the key value of moist Afromontane forests in southwestern Ethiopia for biodiversity conservation. It indicates the need to promote coffee management practices that reduce forest degradation and highlights that high priority should be given to the conservation of undisturbed natural forests. It also suggests the need to integrate conservation goals with housing development in landscape planning. A promising approach to achieve the above conservation priorities would be the creation of a Biosphere Reserve and to promote the ecological connectivity between the larger forest remnants in the region. Finally, this dissertation demonstrates the importance of placed-based holistic approaches in conservation that consider both proximate and distal drivers of forest biodiversity decline.
Both sustainability and transdisciplinary research can change academic research, especially with regard to its relevance for, and relationship with, its environments. Transdisciplinary sustainability research (TSR), thus, offers the opportunity to change non-sustainable development paths of sciences themselves. In order to fully exploit this possibility, this PhD project addresses the question of how TSR, in the first place, does conceptualize and, in the second place, could conceptualize knowledge, research, and science. Firstly, this PhD project analyzes, from a discourse studies perspective, the term problem in TSR, against the background of discourses on sustainable development. Secondly, it explores the historical-analytical and transformative concept of the problematic. The results, firstly, show the consequences of a problem-solving focus for TSR, and secondly, differentiate it from a transformative direction of problematic designing, as a more appropriate view on the dimensions of transformation and their qualities of change that matter for TSR. This PhD project aims to contribute to a self-understanding of, and a philosophical communication about, TSR, as a research form in the sustainability sciences.
As modern society progresses, waste treatment becomes a pressing issue. Not only are global waste amounts increasing, but there is also an unmet demand for sustainable materials (e.g. bioplastics). By identifying and developing processes, which efficiently treat waste while simultaneously generating sustainable materials, potentially both these issues might be alleviated. Following this line of thought, this dissertation focuses on procedures for treatment of the organic fraction of waste. Organic waste is a suitable starting material for microbial fermentation, where carbohydrates are converted to smaller molecules, such as ethanol, acetic acid, and lactic acid. Being the monomer of the thermoplastic poly-lactic acid, lactic acid is of particular interest with regard to bioplastics production and was selected as target compound for this dissertation. Organic waste acted as substrate for non-sterile batch and continuous fermentations. Fermentations were initiated with inoculum of Streptococcus sp. or with indigenous consortium alone. During batch mode, concentration, yield, and productivity reached maximum values of 50 g L−1, 63%, and 2.93 g L−1 h −1. During continuous operation at a dilution rate of 0.44 d−1, concentration and yield were increased to 69 g L−1 and 86%, respectively, while productivity was lowered to 1.27 g L−1 h −1 . To fully exploit the nutrients present in organic waste, phosphate recovery was analyzed using seashells as adsorbent. Furthermore, the pattern of the indigenous consortium was monitored. Evidently, a very efficient Enterococcus strain tended to dominate the indigenous consortium during fermentation. The isolation and cultivation of this consortium gave a very potent inoculum. In comparison to the non-inoculated fermentation of a different organic waste batch, addition of this inoculum lead to an improved fermentation performance. Lactic acid yield, concentration, and molar selectivity could be increased from 38% to 51%, 49 g L−1 to 65 g L−1, and 46% to 86%, respectively. Eventually, fermentation process data was used to perform techno-economic analysis proposing a waste treatment plant with different catchment area sizes ranging from 50,000 to 1,000,000 people. Economically profitable scenarios for both batch and continuous operation could be identified for a community with as few as 100,000 inhabitants. With the experimental data, as well as techno-economic calculations presented in this dissertation, a profound contribution to sustainable waste treatment and material production was made.
Thermal energy storage systems have a high potential for a sustainable energy management. Low temperature thermochemical energy stores based on gas-solid reactions represent appealing alternative options to sensible and latent storage technologies, in particular for heating and cooling purposes. They convert heat energy provided from renewable energy and waste heat sources into chemical energy and can effectively contribute to load balancing and CO2 mitigation. At present, several obstacles are associated with the implementation in full-scale reactors. Notably, the mass and heat transfer must be optimized. Limitations in the heat transport and diffusions resistances are mainly related to physical stability issues, adsorption/desorption hysteresis and volume expansion and can impact the reversibility of gas-solid reactions. The aim of this thesis was to examine the energy storage and cooling efficiency of CaCl2, MgCl2, and their physical salt mixtures as adsorbents paired with water, ethanol and methanol as adsorbates for utilization in a closed, low level energy store. Two-component composite adsorbents were engineered using a representative set of different host matrices (activated carbon, binderless zeolite NaX, expanded natural graphite, expanded vermiculite, natural clinoptiolite, and silica gel). The energetic characteristics and sorption behavior of the parent salts and modified thermochemical materials were analyzed employing TGA/DSC, TG-MS, Raman spectroscopy, and XRD. Successive discharging/charging cycles were conducted to determine the cycle stability of the storage materials. The overall performance was strongly dependent on the material combination. Increase in the partial pressure of the adsorbate accelerated the overall adsorbate uptake. From energetic perspectives the CaCl2-H2O system exhibited higher energy storage densities than the CaCl2 and MgCl2 alcoholates studied. The latter were prone to irreversible decomposition. Ethyl chloride formation was observed for MgCl2 at room and elevated temperatures. TG-MS measurements confirmed the evolution of alkyl chloride from MgCl2 ethanolates and methanolates upon heating. However, CaCl2 and its ethanolates and methanolates proved reversible and cyclable in the temperature range between 25°C and 500°C. All composite adsorbents achieved intermediate energy storage densities between the salt and the matrix. The use of carbonaceous matrices had a heat and mass transfer promoting effect on the reaction system CaCl2-H2O. Expanded graphite affected only moderately the adsorption/desorption of methanol onto CaCl2. CaCl2 dispersed inside zeolite 13X showed excellent adsorption kinetics towards ethanol. However, main drawback of the molecular sieve used as supporting structure was the apparent high charging temperature. Despite variations in the reactivity over thermal cycling caused by structural deterioration, composite adsorbents based on CaCl2 have a good potential as thermochemical energy storage materials for heating and cooling applications. Further research is required so that the storage media tested can meet all necessary technical requirements.
To improve the properties of thermochemical heat storage materials, salt mixtures were evaluated for their heat storage capacity and cycle stability as part of the innovation incubator project "Thermochemical battery" of the Leuphana university Lüneburg. Based on naturally occurring compound minerals, 16 sulfates, 18 chlorides and 5 chloride multi-mixtures, 18 bromides and 5 intermixtures between sulfates, chlorides and bromides were synthesized either from liquid solution or by dry mixing for TGA/DSC screening before continuing the heat storage evaluation with five different measurement setups at a laboratory scale. The TGA/DSC analysis served as a screening process to reduce the number of testing materials for the upscaled experiments. The evaluation process consisted of a three-cycle dehydration/hydration measurement at Tmax=100°C and Tmax=200°C. In case of the bromide samples a measurement of hydration conditions with Tmax=110°C and a water flow at e=18.68mbar, were added to the procedure to detect the maximum water uptake temperature. Also, a single dehydration to a temperature of Tmax=500°C was implemented to observe melting behavior and to easier calculate the samples’ stages of hydration from the remaining anhydrous mass. Materials which showed high energy storage density and improved cycle stability during this first evaluation were cleared for multi-cycle measurements of 10 to 25 dehydration and hydration cycles at Tmax = 100 to 120°C and the evaluations at m=20 to 100g scale. An estimate for the specific heat capacities at different temperatures of the materials which passed the initial stage was calculated from the TGA/DSC results as well. The laboratory scale measurement setup went through five stages of refining, which led to reducing the intended maximum sample mass from m=100g to m=20g. A switch from supplied liquid water to water vapor as the used reactant was also implemented in exchange for improved dehydration conditions. Introducing a vacuum pump for evaporating the water limited the influence of outside heat sources during hydration and in-situ dehydration was enabled as to not disturb the state the samples were settling in between measurements. Baseline calculation from blanc measurements with glass powder and attempts to calculate the specific heat capacity cp of the tested materials by 6 applying the Joule-Lenz-law to the measurement apparatus was another step of method development. The evaluation process of the laboratory scale tests at the final setting consisted of 1 to 5 cycle measurements of in-situ dehydration and hydrations with applied vacuum for t=30 minutes at p~30mbar. Upscaling the sample mass to m=20g allowed for a close observation of different material behaviors. Agglomeration, melting and dissolving of the m=10mg samples during the TGA/DSC analysis can be deducted from the recorded measurement curves and the state of the sample after measurement. However, at laboratory scale the visible volume changes, observed sample consistency after agglomeration and an automatic removal of molten and dissolved sample mass during the measurement allowed for a better characterization and understanding of the magnitude of the actual changes. This was done for the first time, particularly for mixed salts. Of the original number of 62 samples, 4 mixtures which passed the initial TGA/DSC screening namely {2MgCl2+ KCl}, {2MgCl2+CaCl2}, {5SrBr2+8CaCl2} and {2ZnCl2 + CaCl2} were chosen for further evaluation. The multi-cycle TGA/DSC measurements of {2MgCl2+ KCl}, {2MgCl2+CaCl2} and {5SrBr2+8CaCl2} showed an improved cycle stability for all three materials over the untreated educts. Of the four materials {2ZnCl2 + CaCl2} displayed the strongest deliquescence during hydration in the upscaled experimental setup. {2MgCl2+CaCl2} proved to be the most stable material regarding the heat storage density. The {MgCl2} content of the mixture is likely to partially or completely react to {Mg(OH)Cl} at temperatures of T>110°C, which however does not impede the heat storage density. {5SrBr2+8CaCl2} displayed a low melting point in hydrated state, causing a fast material loss. This makes it an undesirable storage material. A lower heating rate may still help to avoid an early melting. The {2MgCl2+KCl} mixture was the most temperature stable of the mixtures showing no melting or dissolving behavior. A reaction of the {MgCl2} component of the mixture to {Mg(OH)Cl} was not observed within the applied temperature range of T=25 to 200°C.
Existing institutions no longer appear to be sufficiently capable to deal with the complexity and uncertainty associated with the wicked problem of sustainability. Achieving the required sustainability transformation will thus require purposeful reform of existing institutional frameworks. However, existing research on the governance of sustainability of sustainability transformations has strongly focused on innovation and the more "creative" aspects of these processes, blinding our view to the fact that they go hand with the failure, decline or dismantling of institutions that are no longer considered functional or desirable. This doctoral dissertation thus seeks to better understand how institutional failure and decline can contribute productively to sustainability transformations and how such dynamics in institutional arrangements can serve to restructure existing institutional systems. A systematic review of the conceptual literature served to provide a concise synthesis of the research on "failure" and "decline" in the institutional literature, providing important first insights into their potentially productive functions. This was followed up by an archetype analysis of the productive functions of failure and decline, drawing on a wide range of literatures. This research identified five archetypical pathways: (1) crises triggering institutional adaptations toward sustainability, (2) systematic learning from failure and breakdown, (3) the purposeful destabilisation of unsustainable institutions, (4) making a virtue of inevitable decline, and (5) active and reflective decision making in the face of decline instead of leaving it to chance. Empirical case studies looking at the German energy transition and efforts to phase out coal in the Powering Past Coal Alliance served to provide more insights on (a) how to effectively harness "windows of opportunity" for change, and (b) the governance mechanisms used by governments to actively remove institutions. Results indicate that the lock-in of existing technologies, regulations and practices can throw up important obstacles for sustainability transformations. The intentional or unintentional destabilisation of the status quo may thus be required to enable healthy renewal within a system. This process required active and reflective management to avoid the irreversible loss of desirable institutional elements. Instruments such as "sunset clauses" and "experimental legislation" may serve as important tools to learn through "trial and error", whilst limiting the possible damage done by failure. Focusing on the subject of scale, this analysis finds that the level at which failure occurs is likely to determine the degree of change that can be achieved. Failures at the policy-level are most likely to merely lead to changes to the tools and instruments used by policy makers. This research thus suggests that failures on the polity- and political level may be required to achieve transformative changes to existing power structures, belief-systems and paradigms. Finally, this research briefly touches on the role of actor and agency in the governance of sustainabilitytransformations through failure and decline. It finds that actors may play an important role in causing a system or one of its elements to fail and in shaping the way events are come to be perceived.
Um das noch bestehende Reichweitenproblem von Elektrofahrzeugen zu lösen, sind Fahrzeugkonzepte wie Plug-in Hybridfahrzeuge sehr vielversprechend, sofern mit ihm überwiegend im Batteriebetrieb gefahren wird. Sie kombinieren die Vorteile des Verbrennungsmotors und des Elektromotors, sodass das lokale Emissionsproblem in Ballungszentren gelöst werden kann, ohne dass der Kunde dabei auf die Reichweite verzichten muss. Wenn das Fahrzeug allerdings überwiegend für Kurzstrecken genutzt wird, sind alterungsbedingte Veränderungen des Kraftstoffes möglich, da dieser länger im Tank verbleibt als üblich. In dieser Arbeit wird ein Konzept zur sensorischen Bestimmung der Qualität des Kraftstoffes vorgestellt. Hierzu wurde ein Prototyp entwickelt, in dem mithilfe des Real- und Imaginärteils der Permittivität alternde Kraftstoffe erkannt werden können. Dabei konnte durch das frequenzabhängige Permittivitätssignal des Sensors spezifisch zwischen nieder- und hochmolekularen Oxidationsprodukten in Kraftstoffen unterschieden werden. Da das Verbrennungs- und Emissionsverhalten des Motors von der Kraftstoffmischung vorgegeben ist, bietet eine zusätzliche sensorische Erfassung der Kraftstoffzusammensetzung weitere Optimierungspotenziale, um Emissionen zu reduzieren: So ist das Motormanagement im Fahrzeug zumeist auf Referenzkraftstoffe mit gleichbleibender Qualität abgestimmt. Variable Kraftstoffzusammensetzungen, die durch die Erdöllagerstätte und den zusätzlichen Konversionsverfahren zur Herstellung von fortschrittlichen Kraftstoffen vorgegeben sind, werden in dieser Anpassungsstrategie bisher nicht berücksichtigt. Als weitere Aufgabe wird in dieser Arbeit daher ein multisensorischer Ansatz verfolgt, wonach zusätzlich zur Kraftstoffalterung noch die Kraftstoffzusammensetzung erkannt werden kann. Insgesamt bietet die Sensorik das Potenzial zur kontinuierlichen Kraftstoffüberwachung in Plug-in Hybridfahrzeugen, um so einen Beitrag zum sicheren und nachhaltigen Betrieb solcher Fahrzeuge gewährleisten zu können.