Filtern
Erscheinungsjahr
Dokumenttyp
- Dissertation (23)
- Habilitation (1)
Schlagworte
- Arzneimittel (4)
- Abwasser (2)
- Biodegradation (2)
- Pestizid (2)
- Photolysis (2)
- Umweltbelastung (2)
- Abgasrückführung (1)
- Abwasserbelastung (1)
- Antibiotikum (1)
- Anticancer Drug (1)
- Aquatic environment (1)
- Automobilabgas (1)
- Benzopyrane (1)
- Biocides (1)
- Biodegradability (1)
- Biodiversität (1)
- Biologische Abbaubarkeit (1)
- Biozide (1)
- Coastel environment (1)
- Data Mining (1)
- Emission (1)
- Emission model (1)
- Emissionsmodell (1)
- Energieeffizienz (1)
- Gewässer (1)
- Gewässerkunde (1)
- Haushaltschemikalie (1)
- Hydrography (1)
- Hydrological tracers (1)
- Ionisierung (1)
- Küstengebiet (1)
- Luftverschmutzung (1)
- Mass spectrometry (1)
- Massenspektrometrie (1)
- Mykorrhiza (1)
- Naturschutz (1)
- Niedersachsen (1)
- Nordatlantik (1)
- Oberflächengewässer (1)
- Ostsee (1)
- Pesticide formulation (1)
- Pharmaceuticals (1)
- Photodegradation (1)
- Polychlorierte Biphenyle (1)
- Schädlingsbekämpfungsmittel (1)
- Sediment (1)
- Seehund (1)
- Thermal energy storage (1)
- Tiermedizin (1)
- Toxicity (1)
- Toxizität (1)
- Umweltanalytik (1)
- Umweltschutz (1)
- Wasseranalyse (1)
- Wasserbehandlung (1)
- Wastewater (1)
- Water Analysis (1)
- Water treatment (1)
- Wärmespeicher (1)
- car emission (1)
- energy efficiency (1)
- ionization (1)
- mycorrhiza (1)
- pesticide (1)
- wastewater concentration (1)
- Ökologie (1)
Institut
- Institut für Nachhaltige Chemie und Umweltchemie (INUC) (24) (entfernen)
Die Senkung der Abgasemissionen von Dieselmotoren ist ein zentraler Bestandteil der Motoren-Entwicklung. Die positive Beeinflussung kann auf verschiedene Arten erfolgen. Zum einen werden durch die Optimierung der innermotorischen Verbrennung die Abgasbestandteile gesenkt. Zum anderen kann mit Hilfe von Abgasnachbehandlungs-systemen der Ausstoß von umweltschädlichen und toxikologischen Abgasbestandteilen minimiert werden. Die Rückführung von Abgas in den Frischluft-Massenstrom (Abgasrückführung, AGR) ist eine konstruktive Maßnahme zur Reduktion von Stickstoffoxid-Emissionen bei Dieselmotoren. Bei diesen Abgasrückführungs-Systemen ist das AGR-Ventil ein zentraler Bestandteil und wird häufig mit einem Kühler kombiniert. Je nach Abgaskonzept des Motors werden Hoch- oder Niederdruck-Abgasrückführung - d.h. das Abgas wird vor oder nach dem Abgasturbolader entnommen - oder eine Kombination aus beiden System eingesetzt. In der vorliegenden Arbeit werden die Wechselwirkungen und Einflüsse von Ablagerungen in Turbo-aufgeladenen Dieselmotoren betrachtet. Der Schwerpunkt der Untersuchungen wird auf das Teilgebiet dieser Ablagerungen im Hochdruck-AGR-System gelegt, da der zu untersuchende Volkswagen Motor in Fahrzeugen zur Einhaltung der Abgasemissionsstufe Euro 5 mit einer wassergekühlten Hochdruck-AGR und einem Abgasnachbehandlungssystem ausgerüstet ist. Das Abgas der Hochdruck-AGR wird direkt vor dem Abgasturbolader entnommen und wieder der Frischluft-Ansaugstrecke zugeführt. Das entnommene Abgas wird dabei nicht durch Abgasnachbehandlungs-Systeme gereinigt, sondern alle Abgasbestandteile werden über den Kühler und über das Ventil geführt. Dabei kann es zu Verschmutzungen kommen, die potentiell die Kühlleistung, sowie die zurück geführte Abgasmasse und das Brennverfahren beinträchtigen könnten. Im Laufe der Arbeit wird die Arbeitsweise der genannten Abgasrückführung und der verschiedenen Brennverfahren im Dieselmotor eingehend beschrieben. In der vorliegenden Dissertation werden drei Aspekte der genannten Verschmutzungen bzw. Ablagerungen im AGR-System näher untersucht. Erster Aspekt: Zunächst werden die physikalischen und chemischen Ablagerungs-mechanismen aufgezeigt, die zu Verschmutzungen bzw. zu Ablagerungen in AGR-Systemen führen können. Zweiter Aspekt: Die Ablagerungen wurden hinsichtlich ihrer chemischen Zusammensetzung untersucht. Es konnte dabei festgestellt werden, dass die gefundenen Ablagerungen vollständig organisch-chemischer Natur sind und zum größten Teil aus Dieselruß, polyzyklischen aromatischen Kohlenwasserstoffen, unverbranntem Kraftstoff, sowie diversen polymeren Strukturen bestehen. Letztere werden in situ durch die vorherrschenden Temperaturen und vorliegenden Molekül-Kombinationen dargestellt. Dritter Aspekt: Die Einfluss-Faktoren und der Mechanismus der Ablagerungsbildung werden beschrieben und in Motor-Funktionsprüfstand- und in Labor-Versuchen nachgestellt. Insbesondere der Einfluss von polyzyklischen aromatischen Kohlenwasserstoffen und der Aufbau von organischen Polymeren auf Basis von Phenol-Aldehyd-Harzen, als auch Netzwerk Bildungsmechanismen mit Biodiesel-Molekülen und Veresterungs-Reaktionen haben sich als signifikante Mechanismen herausgestellt. Darüber hinaus kann ein starker Einfluss der Abgas- und Kühler-Temperaturen nachgewiesen werden. Je größer die Temperaturdifferenz zwischen Kühlwasser-Temperatur und Abgas-Temperatur ist, desto besser werden die chemischen Komponenten auf der Kühler-Oberfläche abgeschieden. Zusätzlich verstärken Abgas-Temperaturen bis zu 800 Grad C die Pyrolyse-Reaktionen und damit die Bildung von Netzwerken aus polyzyklischen aromatischen Kohlenwasserstoffen. In Verbindung mit anschließenden Abkühlphasen werden die kondensierten Abgas-Bestandteile abgekühlt und der Status einer Netzwerk-Bildungs-Reaktion ´eingefroren´. In Zusammenspiel mit Dieselruß-Partikeln wird eine Oberfläche geschaffen, die weitere Abgas-Komponenten aufzunehmen vermag. Die sich daran anschließenden Hoch-Temperatur-Phasen pyrolysieren das organische Material und erzeugen damit eine feste und festhaftende Oberfläche bzw. Isolationsschicht. Die im Abgas enthaltene Wärme kann nicht mehr über den Wärmetauscher abgeführt werden und die Pyrolyse-Reaktionen werden durch steigende Temperaturen an der Oberfläche verstärkt. Die Ablagerungsbildung katalysiert sich selbst.
In der vorliegenden Arbeit werden Untersuchungsergebnisse von niedersächsischen Gewässern auf Triphenylzinn (TPT) präsentiert. Betrachtet werden die Matrices Wasser, Schwebstoff, Sediment und aquatische Organismen, wie Makrozoobenthos und Fische, um eine möglichst umfassende Aussage hinsichtlich des Akkumulationsverhaltens von TPT zu erhalten. Da TPT ein ähnlich endokrin wirksames Potential wie Tributylzinn (TBT) aufweist, über TBT aber wesentlich mehr Informationen und Erkenntnisse als über TPT vorliegen, sind zudem vergleichende Betrachtungen zwischen diesen beiden Organozinnspezies angestellt worden. Die wichtigsten Aussagen dieser Arbeit sind, dass sich TPT in den Kompartimenten Wasser, Schwebstoff und Sediment unauffällig verhält, es jedoch über ein sehr hohes Bioakkumulationsverhalten verfügt. Aus diesen Ergebnissen ist zu fordern, dass Gewässerüberwachungsprogramme unbedingt um die Stufe eines Biomonitorings, in dem aquatische Organismen als Endglieder der Nahrungskette auf Schadstoffe untersucht werden, zu erweitern sind.
After being administrated to humans or animals, pharmaceuticals may be metabolized by a variety of mechanisms and pathways within the body. Once these compounds and/or their metabolites are excreted, they may undergo degradation in the aquatic environment. Unfortunately, a rapid and complete mineralization cannot always be guaranteed, whereas relatively stable transformation products (TPs) may be formed. The largest part of older studies focused on investigation of the elimination kinetics of parent compounds without considering the amount and chemical structure of individual TPs. Only recently, there is an increasing trend to deliver such information. Nevertheless, since drugs are defined as significant environmental pollutants, it is not only important to elucidate their TPs, but also necessary to investigate whether these formed compounds preserve the same mode of action as the parent compound or are even more toxic. Thus, two main objectives of this thesis can be formulated. Firstly, to highlight the concern originated by metabolites and transformation products of pharmaceuticals that contaminate the environment. Hereby, the already-published knowledge on TPs within a certain selection of drugs is assessed to exemplify the number and quality of the existing information on their TPs. Secondly, to particularly investigate the fate of the antibiotic ciprofloxacin (CIP). This is done by (a) evaluating the suitability and sustainability of the photolytic decomposition as an advanced water treatment technique, (b) monitoring the course of genotoxicity of the irradiated mixtures using a battery of genotoxicity and cytoxicity in vitro assays, and (c) considering the potential genotoxicity for CIP´s individual TPs by the employment of in silico approaches using quantitative structure activity relationships (QSAR) models. This thesis based on the results and conclusions of five articles, which can be found in the appendix. A systematic literature review was conducted on the current state of knowledge on pharmaceuticals and its derivatives in the environment. Two groups, namely antibiotics and anticancer drugs, were considered more closely with respect to the availability of chemical structures for their TPs. Furthermore, the photodegradation of CIP as well as a preliminary toxicity assessment of its identified TPs were investigated in three research papers. An extensive review with a table at its core shows the existing data on 158 TPs, which already have an assigned registry number in chemical abstracts service (CAS-RN), was presented. In total, 294 TPs, identified with chemical structures in the literature, were found for 15 compounds out of the 21 that were selected as target compounds. Eleven TPs, created from CIP, were identified by high-performance liquid chromatography/high-resolution multiple-stage mass spectrometry. It was detected that the transformation of CIP mainly occurred through substitution of fluorine, defluorination, hydroxylation of the quinolone core and the breakdown of the piperazine ring. Some of the identified TPs of CIP were predicted as genotoxic by QSAR analysis, while the experimental testing for a few genotoxic and cytotoxic endpoints showed that the potential of the resultant mixtures could be primarily dependent on the concentration of residual CIP. In contrast, irradiation mixtures were neither mutagenic in the Ames Test nor genotoxic in the in vitro Micronucleus Test. It is possible that the effect of the TPs was masked by antagonistic mixture interactions and/or they were not formed at effectively concentrations. Nevertheless, all of the identified TPs of CIP still retained the core quinolone moiety, which is responsible for the biological activity. Thus, a more comprehensive assessment, encompassing more genotoxic endpoints, chemical analysis characterization and exposure analyses, needs to be conducted. Information available on TPs demonstrates that already slight changes in treatment conditions and processes result in the formation of different TPs. Nevertheless, most of the transformation products could neither be identified nor fully assessed regarding their toxicity. This, in turn, presents a major challenge for the identification and assessment of TPs. Hence, from a practical and sustainability point of view, limiting the input of pharmaceuticals into effluents as well as improving their (bio)degradability and elimination behavior, instead of only relying on advanced effluent treatments, is urgently needed. Solutions that focus on this
Siliziumorganische Substanzen sind aus dem Alltag kaum wegzudenken. Sie kommen in vielfältiger Form vor und finden durch ihre Stabilität in vielen Produkten des Haushalts und der Industrie Anwendung. Eine Freisetzung in die Umwelt ist unvermeidbar. Siliziumorganische Substanzen konnten bereits in allen Umweltkompartimenten (Luft, Wasser, Boden) analytisch nachgewiesen werden. Welche Risiken von dieser Stoffgruppe ausgehen, ist noch nicht abschließend geklärt. Dennoch gibt es Hinweise auf negative Auswirkungen auf Mensch und Umwelt. Deshalb sollten Strukturen in siliziumorganischen Substanzen untersucht werden, die einen Abbau in der Umwelt begünstigen, um die Akkumulation dieser Stoffe in der Umwelt zu verringern. Dafür wurden diverse biotische und abiotische Abbautests mit unterschiedlichen siliziumorganischen Substanzen durchgeführt. Der Fokus der vorliegenden Arbeit lag vor allem in der biologischen Abbaubarkeit der Substanzen. Es wurden die Organisation for Economic Co-operation and Development (OECD)-konformen Tests Closed-Bottle-Test (CBT, OECD 301D) und Manometrischer Respirationstest (MRT, OECD 301F) durchgeführt. Die Hydrolysierbarkeit wurde mithilfe des Hydrolysetests OECD 111 bei unterschiedlichen pH-Werten untersucht. Bei bestimmten Substanzgruppen ohne biologischen Abbau wurde das Verhalten der Substanzen bei Bestrahlung mit verschiedenen Bestrahlungsquellen untersucht. Die Analyse der Primärelimination der siliziumorganischen Substanzen erfolgte je nach Substanzeigenschaften mithilfe der Hochleistungsflüssigkeitschromatografie gekoppelt mit einem Spektrometer mit ultraviolettem und sichtbarem Licht (HPLC-UV/Vis) oder der Gaschromatografie gekoppelt mit einem Massenspektrometer (GC-MS). Die Transformationsprodukte wurden hingegen mithilfe der Flüssigkeitschromatografie gekoppelt mit einem Mehrfach-Massenspektrometer (LC-MSn) analysiert. Für eine umfassende Bewertung des biologischen Abbaus von siliziumorganischen Substanzen wurden ein Vergleich mit analogen Kohlenstoffverbindungen und eine Aufstockung mit Daten aus der Datenbank der Europäischen Chemikalien Agentur (ECHA) durchgeführt. Die Gruppierung der Substanzen nach ihren Strukturmerkmalen wurde hinzugezogen, um Rückschlüsse auf die Abbaubarkeit zu ziehen. Eine besser biologisch abbaubare Grundstruktur brachte für die Benzenderivate keine Verbesserung der biologischen Abbaubarkeit. Dennoch hatte die Einführung von +M-Gruppen am Aromaten einen positiven Einfluss auf die Geschwindigkeit und den Grad des photolytischen Abbaus. Die Bestrahlungsquelle hatte ebenfalls einen deutlichen Einfluss auf die Eliminierungsrate während des Photolyseexperiments. Mit einer Veränderung der Wellenlängen in den kurzwelligen Bereich und der daraus resultierenden energiereicheren Strahlung konnten die Substanzen schneller und teilweise vollständig primär eliminiert werden. Bei allen Abbaupfaden hatte die Hydrolyse eine entscheidende Rolle und wurde als einer der Hauptabbauprozesse charakterisiert. Bei einer Verbindung wurde im Nachgang an die biotischen und abiotischen Abbautests eine ausführliche Aufklärung der elf gebildeten Transformationsprodukte vorgenommen. Um den Einfluss von Silizium in organischen Substanzen auf die biologische Abbaubarkeit zu untersuchen, wurde der direkte Vergleich von siliziumorganischen Substanzen und deren Kohlenstoffanaloga im CBT durchgeführt. Dabei hat sich gezeigt, dass drei von fünf Kohlenstoffverbindungen und keine siliziumorganische Verbindung als leicht biologisch abbaubar eingestuft werden konnten. In allen bis auf einen Fall konnten für die Kohlenstoffverbindungen höhere Abbauraten im CBT beobachtet werden. Die Hydrolyse wurde als erforderlicher Schritt vor dem biologischen Abbau von siliziumorganischen Substanzen identifiziert. Das siliziumfreie Produkt der Hydrolyse bestimmte den Grad des biologischen Abbaus. Die gute biologische Abbaubarkeit der einen siliziumorganischen Verbindung resultierte aus der leicht hydrolysierbaren Silizium-Stickstoff-Bindung und der leichten biologischen Abbaubarkeit des siliziumfreien Hydrolyseproduktes. Die siliziumhaltigen Reaktionsprodukte der Hydrolyse waren nicht biologisch abbaubar. Bioabbaudaten aus eigenen Experimenten, aus vorhergehenden in der Arbeitsgruppe durchgeführten analogen Arbeiten und aus der ECHA-Datenbank wurden zusammengetragen, um einen Datensatz zu generieren. Die 182 Substanzen des Datensatzes wurden hinsichtlich ihrer Struktur gruppiert, um allgemeine Erkenntnisse für die biologische Abbaubarkeit von siliziumorganischen Verbindungen abzuleiten. Es gab Gruppen mit Substanzen, die überhaupt nicht biologisch abbaubar waren (z. B. zyklische, lineare und verzweigte Siloxane). Gruppen, die Substanzen mit Ethern, Estern, Oximen, Aminen und Amiden enthielten, waren hydrolyseanfällig, sodass auch leicht biologisch abbaubare Zwischenprodukte gebildet werden konnten. Die siliziumfreien Hydrolyseprodukte waren meist biologisch abbaubar, während die siliziumhaltigen Hydrolyseprodukte persistent waren. Allgemein hat sich gezeigt, dass Modifikationen am Molekül einen positiven Einfluss auf die Abbaubarkeit haben können. Beispielsweise können Heteroatome eine Veränderung der Polarität bzw. der Elektronendichte hervorrufen, was die Photolyse- und Hydrolysefähigkeit und folglich auch den Bioabbau zum Positiven verändern kann. Das Einführen solcher Heteroatome oder funktioneller Gruppen in Polysiloxanketten kann demnach ein vielversprechender Ansatz für leichter abbaubare siliziumorganische Verbindungen sein. Nicht abbaubare Stoffe sollten vermieden werden, wenn sie nach ihrer Verwendung in die Umwelt gelangen.
Among all attenuation processes, biodegradation plays one of the most important role and is one of the most desirable processes in the environment. To assess biodegradation, a variety of biodegradation test procedures have been developed by several international organizations. OECD guidelines for ready biodegradability testing represent one of the most prominent group of internationally used screening biodegradation tests (series 301A-F). These tests are usually very simple in their designs and allow for the fast and cheap screening of biodegradability. However, because of their stringency, the test conditions are not close to simulating environmental conditions and may lead to unrealistic results. To overcome these limitations, OECD introduced simulation tests which are designed to investigate the behavior of chemicals in specified environmentally relevant compartments. Despite the fact that simulation tests give more insight into the fate of chemicals in the environment, they are not applied frequently as they are often tedious, time consuming and expensive. Consequently, there is a need to provide a new biodegradation testing method that would combine complex testing environment as in simulation tests, easiness in handling and good data repeatability as in screening biodegradation tests. Another challenge is an adaption of the existing biodegradation testing methods to new types of samples, i.e. mixtures of transformation products (TPs). The research on the presence of pharmaceuticals in the environment gained momentum in the 1990s; since then, it has been growing. Their presence in the environment is a wellestablished fact. A wide range of pharmaceuticals is continuously detected in many environmental compartments such as surface waters, soils, sediments, or ground waters. After pharmaceuticals reach the natural aquatic environment they may undergo a number of processes such as: photolysis (under direct sunlight), hydrolysis, oxidation and reduction reactions, sorption, biodegradation (by bacteria of fungi), and bioaccumulation. These processes, may cause their elimination from aquatic environment, if reaction is complete, or creation of new compounds i.e., transformation products (TPs). What is more, processes, like chlorination and advanced oxidation processes (AOPs), such as H2O2/UV, O3/UV, TiO2/UV, Fenton, and photo-Fenton, or UV treatment which might be applied in water or wastewater treatment, may also lead to the TPs introduction into aquatic environment. The research on the TPs brings many new challenges. From one side, there is a constant need for the the development of a sensitive and reliable analytical separation, detection, and structure elucidation methods. Additionally, there is a need for the preparation of appropriate assays for the investigation of properties of new compounds, especially those answering the question if TPs pose a higher risk to the aquatic ecosystems than their parent compounds. Among numerous groups of pharmaceuticals, two are of great importance: antibiotics since they might promote emergence and maintenance of antimicrobial resistance in the aquatic environment; and cytostatic drugs. Cytostatic drugs can exert carcinogenic, mutagenic and/or teratogenic effects in animals and humans. The challenges of biodegradation testing presented in this thesis, encompasses these different areas of interest and was divided into three objectives: 1) Identification of the knowledge gaps and data distribution of the two groups of pharmaceuticals antibiotics and cytostatic drugs (article I); 2) Increasing the knowledge on biodegradation of cytostatic drugs and their TPs (articles II, III, and IV) and 3) Establishment of a biodegradation test with closer to simulation tests conditions, that could be affordable and to support better understanding on processes in water sediment interface construction - screening water-sediment test. Further validation of the test with an insight into sorption and desorption processes (articles V and VI).
This study summarizes more than 15 years of scientific support for the United Nations-Economic Commission Europe (UN-ECE) Convention on Long Range Transboundary Air Pollution (LRTAP) and other European environmental protection conventions such as the Commission for the Protection of the Marine Environment of the North-East Atlantic (OSPAR) and the Baltic Marine Environment Protection Commission (HELCOM) by means of development and application of numerical simulation models for the atmospheric long-range transport of heavy metals. The work is mainly based on results and conclusions described in the nine papers of the appendix but some more recent investigations which have not yet been published in the scientific literature are also presented. An introductory overview and synthesis of current knowledge and understanding pertaining to all major aspects of heavy metals in the atmosphere is presented from a viewpoint that numerical modelling of their atmospheric processes is necessary and feasible to support the conventions mentioned above. The models discussed in this study have capabilities to quantify transboundary fluxes of lead, cadmium and mercury as the priority metals of concern and have a potential to identify sources as well as to predict the impact of emission reductions on the load of terrestrial and aquatic ecosystems in Europe. Advantages and limitations of relatively simple Lagrangian models are outlined within the context of issues currently facing the environmental scientific and policy making communities. However, a focus of this study is a comprehensive model system for atmospheric mercury species using a fully three-dimensional Eulerian reference frame and incorporating a state-of-science mercury chemistry scheme, which has been adopted by various scientific institutions for their modelling purposes.
Organophosphorus flame retardants and plasticizers (OPEs) have been utilized for decades as plasticizers and, to a lesser extent, as flame retardants in various consumer products to improve their material properties. The research presented in this thesis investigated the occurrence, distribution and transport of OPEs with a focus on the coastal and estuarine environment. Due to the wide range of physicochemical properties of OPEs, the environmental fate and behaviour of OPEs was investigated over a range of compartments, starting from the atmospheric occurrence to the aquatic phase and the behaviour in sediments. The aim was to gather information on the OPE contamination situation in the coastal and estuarine environments, to identify specific contamination patterns for source assessment and to investigate the distribution behaviour of OPEs between gas- and particle-phases to evaluate their environmental transport mechanism. To achieve these scientific goals, sensitive and robust chemical analytical methods for the detection and quantification of OPEs in a variety of environmental samples using gas-chromatography coupled with tandem mass spectrometry were developed. Water samples were removed along the Elbe and Rhine Rivers to test the hypothesis of whether specific point sources, such as wastewater treatment plants, are the major input pathways for OPE contamination in rivers. A total of 65 water samples, including an intensive measurement campaign during the flood event in 2013 at the Elbe, was taken and analysed for OPEs. No obvious point sources were identified along either of the rivers analysed. No significant increase or decrease in the OPE concentrations or a change in patterns were observed over a transect of over 300 km at the Elbe, with an increase in water discharge of 2.5. This finding suggested that the OPE input in large rivers is primarily driven by diffuse sources, such as surface runoff, or by minor point sources rather than local point sources. To examine the specific pattern of OPE contamination in individual rivers and estuaries, 37 sediment samples from 8 rivers in Europe and China were analysed. With this analytical data, a fingerprint analysis of the OPE patterns identified could be conducted. All the rivers investigated in Europe displayed a very similar fingerprint. In contrast, the fingerprint from China differed significantly from the one in Europe. For example, in China, the OPE restricted in Europe, Tris(2-chloroethly)phosphate, was found to be one of the major OPE components, while Tris(2-butoxyethyl) phosphate, a major compound in Europe, was negligible in China. The investigation showed that the fingerprinting analysis is a useful tool to identify different regions or characterize specific rivers regarding their OPE contamination. In addition, it could be shown that legislative restriction and processes have an impact on local or even EU-wide contamination patterns. At a coastal site next to the German city of Büsum, 58 air samples were taken over one year. Using the newly developed analytical method, it was possible to analyse the gas, as well as the particle phase, of the samples collected with very low detection limits for OPEs. In contrast to expectations, no annual trend in OPE concentrations, phase distributions or patterns was observed, but the investigation of the phase distribution challenged the previous scientific consensus that OPEs occur as primarily bound to particles in the atmosphere. Several compounds were detected in significant amounts in the gas phase. To validate these novel results, a model analysis based on the chemical properties of OPEs was conducted using three different phase distribution models. The results from the environmental data were strongly supported by the simulations, and the formal knowledge could be refuted. Consequently, the atmospheric transport assumptions and estimations about the long-range transport of OPEs have to be reassessed because compounds in the gas phase undergo other types of transport degradation and elimination mechanisms than particle-boundones. The novel findings presented in this thesis challenged an important aspect regarding the perceived scientific knowledge about the behaviour of OPEs in the environment and call on the scientific community to reassess the environmental behaviour of OPEs. The insights presented on the patterns highlight the impact of environmental policies and regulatory mechanisms to work towards the final goal of a good environmental status and the avoidance of adverse effects of discarded chemicals on humans and the environment.
Verbräuche von Arzneistoffen, die auf das menschliche Nervensystem wirken (Neurologika), unterliegen aufgrund der auf dem Markt befindlichen Arzneistoffvielfalt einem ständigen Wandel. Zudem waren die Haupteintragspfade für Neurologika in die aquatische Umwelt bisher nicht eindeutig geklärt. Haushalte (diffuser Eintrag) und Einrichtungen des Gesundheitswesens (punktueller Eintrag), wie psychiatrische Fachkliniken oder Pflegeheime, wurden als maßgebliche Eintragspfade diskutiert. Ziel dieser Arbeit war es deshalb, Arzneimittelverbräuche und damit verbundene Arzneistoffemissionen durch Haushalte und Einrichtungen des Gesundheitswesens mit Hilfe einer neu entwickelten Methode abzuschätzen. Bei dieser Methode wurde das jeweilige Ausmaß der Emissionen durch die Kalkulation von Abwasserkonzentrationen und den Vergleich von Verbrauchsmengen an Arzneistoffen bestimmt. Im Ergebnis konnte gezeigt werden, dass sich Arzneimittelverbrauchsmuster in psychiatrischen Fachkliniken und Pflegeheimen von denen in allgemeinen Krankenhäusern und Haushalten unterscheiden. Außerdem konnte mit dieser Methode deren jeweiliger Beitrag am gesamten Arzneistoffeintrag in das kommunale Abwasser eingeschätzt und in hohen Mengen in das Abwasser eingetragene Arzneistoffe identifiziert werden. Durch Haushalte wurde das hinsichtlich des Umweltverbleibs und -verhaltens wenig untersuchte Antiepileptikum Gabapentin in hohen Mengen in das Abwasser eingetragen. Die Bedeutung von Einrichtungen des Gesundheitswesens am Arzneimitteleintrag in das kommunale Abwasser konnte für alle untersuchten Einrichtungstypen im Vergleich zu Haushalten als gering eingestuft werden. Bestimmte einrichtungstypische Arzneistoffe, insbesondere Neurologika, können bei regionaler Betrachtung jedoch eine größere Rolle spielen. Insbesondere Quetiapin wurde in psychiatrischen Fachkliniken und Pflegeheimen als Substanz mit hohen Verbrauchsmengen und hohem Emissionspotential identifiziert. Ausgehend von diesen Erkenntnissen wurden Gabapentin und Quetiapin tiefergehend hinsichtlich ihres Verbleibs und ihres Verhaltens in der aquatischen Umwelt charakterisiert. Beide Arzneistoffe wurden bei verschiedenen Startkonzentrationen zur Simulation eines technischen Behandlungsverfahrens mit UV-Licht bestrahlt. Im weiteren Verlauf wurden Gabapentin und Quetiapin und die jeweilige Muttersubstanz im Gemisch mit gebildeten Phototransformationsprodukten hinsichtlich biologischer Abbaubarkeit im Closed Bottle Test und im Manometrischen Respirationstest nach OECD-Richtlinien und hinsichtlich toxischer Eigenschaften im Leuchtbakterientest und im Umu-Test beurteilt. Die Strukturaufklärung von Photo- und Biotransformationsprodukten erfolgte mittels hochauflösender Massenspektrometrie. Im Ergebnis konnten weder Gabapentin noch Quetiapin bei hohen Startkonzentrationen durch Photolyse über 128 min mineralisiert oder vollständig eliminiert werden. Identische Phototransformationsprodukte wurden bei unterschiedlichen Startkonzentrationen für die UVBehandlung gebildet. Die Arzneistoffe Gabapentin und Quetiapin waren nach OECD-Richtlinien im Closed Bottle Test nicht leicht biologisch abbaubar. Die photolytischen Gemische von Gabapentin sind nicht besser als Gabapentin selbst abbaubar und die Phototransformationsprodukte wurden im Closed Bottle Test ebenfalls nicht eliminiert. Auch das photolytische Gemisch von Quetiapin im Closed Bottle Test war nicht besser biologisch abbaubar als Quetiapin selbst. Die Phototransformationsprodukte von Quetiapin und Quetiapin selbst unterlagen beim Closed Bottle Test und im Manometrischen Respirationstest verschiedenen biologischen Transformationsprozessen und führten zur Bildung von verschiedenen Biotransformationprodukten. Das in biologischen Abbautests von Quetiapin maßgeblich gebildete Biotransformationprodukt BTP 398 konnte in diversen Flusswasserproben nachgewiesen werden. Dies lässt sich höchstwahrscheinlich damit erklären, dass BTP 398 unter anderem auch beim humanen Metabolismus gebildet wird. Die Langzeit-Leuchthemmung und die Zellvermehrungshemmung im Leuchtbakterientest stiegen im Verlauf der Photolyse von Gabapentin durch Bildung von Phototransformationsprodukten. Dies deutet auf eine erhöhte Toxizität der Phototransformationsprodukte im Vergleich zu Gabapentin hin. Bei Quetiapin war unter Photolyse keine Abnahme der schon vorhandenen Toxizität beim Leuchtbakterientest zu erkennen. Gabapentin, Quetiapin und deren Phototransformationsprodukte wiesen im Umu-Test keine Genotoxizität auf. …
The emission of anthropogenic trace substances into the aquatic environment continuously poses challenges to water suppliers. The contamination of raw waters with organic trace substances requires complex water treatment processes to secure drinking water quality. The routine monitoring of these raw waters as well as the behavior and fate of organic trace substances during different treatment processes is of great interest to recognize and counter potential dangers at an early stage. Non-target screening using liquid chromatography coupled to high-resolution mass spectrometry (LC-HRMS) allows the detection of thousands of compounds within a single run and covers known as well as unknown substances. Compared to the established analytical techniques, this is a decisive advantage for the monitoring of raw and process waters during water treatment. While the analytical technique LC-HRMS has undergone significant developments in recent years, the algorithms for data processing reveal clear weaknesses. This dissertation therefore deals with reliable processing strategies for LC-HRMS data. The first part of this work seeks to highlight the problematics of false positive and false negative findings. Based on repeated measurements, various strategies of data processing were assessed with regard to the repeatability of the results. To ensure that real peaks were barely or not removed by the filtering procedure, samples were spiked with isotope-labeled standards. The results emphasize that the processing of sample triplicates results in sufficient repeatability and that the signal fluctuation across the triplicates emerged as a powerful filtering criteria. The number of false positives and false negatives could be significantly reduced by the developed strategies which consequently improve the validity of the data. The second part of this thesis addresses the development of processing strategies particularly aimed at assessing water treatment processes. The detected signals were tracked across the treatment process and classified based on their fold changes. A more reliable signal classification was achieved by implementing a recursive integration approach. Special integration algorithms allow a reliable signal classification even though the signal to be compared was below the intensity threshold. Different combinations of replicates of process influents and effluents were processed for evaluating the repeatability. The good repeatability was indicated by the results of both the plausibility checks and the ozonation process (ozonation of pretreated river water) and thus points to high reliability. The applicability of the developed strategies to real world applications is demonstrated in the last part of this work. Besides the prioritization of the generated results, the main focus was the identification of recognized compounds. The developed strategies clearly improve the validity of the underlying data. The combination of LC-HRMS analysis with reliable processing strategies opens up multiple possibilities for a more comprehensive monitoring of water resources and for the assessment of water treatment processes. The processing strategies and validation concepts may be easily transferred to other research fields.